Email this article Influence of plastic deformation and asymmetric loading on the properties of Fe–Al and Mn–Cu damping alloys
- Authors: Chudakov I.B.1, Aleksandrova N.M.1, Makushev S.Y.1, Turmambekov T.A.2
-
Affiliations:
- Bardin Central Research Institute of Ferrous Metallurgy
- Yassawi International Kazakh–Turkish University
- Issue: Vol 47, No 6 (2017)
- Pages: 428-433
- Section: Article
- URL: https://journal-vniispk.ru/0967-0912/article/view/179682
- DOI: https://doi.org/10.3103/S0967091217060031
- ID: 179682
Cite item
Open Access
Access granted
Subscription Access
Abstract
Attention focuses on how plastic deformation and asymmetric loading affect the properties of Fe‒Al and Mn–Cu damping alloys. When the vibrational amplitude is small, the damping properties of Fe‒Al alloys are highly sensitive to external static loads; the sensitivity is much less for Mn–Cu alloys. With decrease in the grain size of Fe–Al alloys, the sensitivity to external static loads is much reduced.
About the authors
I. B. Chudakov
Bardin Central Research Institute of Ferrous Metallurgy
Author for correspondence.
Email: i-chudakov@yandex.ru
Russian Federation, Moscow
N. M. Aleksandrova
Bardin Central Research Institute of Ferrous Metallurgy
Email: i-chudakov@yandex.ru
Russian Federation, Moscow
S. Yu. Makushev
Bardin Central Research Institute of Ferrous Metallurgy
Email: i-chudakov@yandex.ru
Russian Federation, Moscow
T. A. Turmambekov
Yassawi International Kazakh–Turkish University
Email: i-chudakov@yandex.ru
Kazakhstan, Turkestan
Supplementary files
