Email this article Model of Nanostructuring Burnishing by a Spherical Indenter Taking into Consideration Plastic Deformations
- Authors: Lyashenko Y.A.1,2, Popov V.L.1,3,4
-
Affiliations:
- Berlin Technical University
- Sumy State University
- National Research Tomsk State University
- National Research Tomsk Polytechnic University
- Issue: Vol 63, No 1 (2018)
- Pages: 51-56
- Section: Physical Science of Materials
- URL: https://journal-vniispk.ru/1063-7842/article/view/200500
- DOI: https://doi.org/10.1134/S1063784218010188
- ID: 200500
Cite item
Open Access
Access granted
Subscription Access
Abstract
A dynamic model of the nanostructuring burnishing of a surface of metallic details taking into consideration plastic deformations has been suggested. To describe the plasticity, the ideology of dimension reduction method supplemented with the plasticity criterion is used. The model considers the action of the normal burnishing force and the tangential friction force. The effect of the coefficient of friction and the periodical oscillation of the burnishing force on the burnishing kinetics are investigated.
About the authors
Ya. A. Lyashenko
Berlin Technical University; Sumy State University
Email: popov@tu-berlin.de
Germany, Berlin, 10623; Sumy, 40007
V. L. Popov
Berlin Technical University; National Research Tomsk State University; National Research Tomsk Polytechnic University
Author for correspondence.
Email: popov@tu-berlin.de
Germany, Berlin, 10623; Tomsk, 634050; Tomsk, 634050
Supplementary files
