Email this article Wear Resistance of Glass- and Carbon-Filled Polyamide Composites for Metal-Polymer Gears
- Authors: Chernets M.V.1, Shil’ko S.V.2, Pashechko M.I.3, Barshch M.4
-
Affiliations:
- Lublin University of Technology, Department of Mechanical Engineering
- Belyi Metal-Polymer Research Institute, National Academy of Sciences
- Lublin University of Technology, Department of Technology
- Lublin University of Technology, Department of Electrotechnics and Computer Science
- Issue: Vol 39, No 5 (2018)
- Pages: 361-364
- Section: Article
- URL: https://journal-vniispk.ru/1068-3666/article/view/229148
- DOI: https://doi.org/10.3103/S1068366618050069
- ID: 229148
Cite item
Open Access
Access granted
Subscription Access
Abstract
The results of the tribotesting of polyamide composites dispersely filled with glass (PA6-L-CV30-1) and carbon (UPA-6130UV) fibers, which are promising for the production of metal-polymer gears, are presented. The characteristics of their wear resistance under the sliding friction conditions are determined. The calculation estimation of the durability of the metal-polymer cylindrical spur gears with wheels made of specified antifriction materials by the criterion of extreme wear and tear is obtained.
About the authors
M. V. Chernets
Lublin University of Technology, Department of Mechanical Engineering
Email: shilko_mpri@mail.ru
Poland, Lublin, 20-618
S. V. Shil’ko
Belyi Metal-Polymer Research Institute, National Academy of Sciences
Author for correspondence.
Email: shilko_mpri@mail.ru
Belarus, Gomel, 246050
M. I. Pashechko
Lublin University of Technology, Department of Technology
Email: shilko_mpri@mail.ru
Poland, Lublin, 20-618
M. Barshch
Lublin University of Technology, Department of Electrotechnics and Computer Science
Email: shilko_mpri@mail.ru
Poland, Lublin, 20-618
Supplementary files
