Email this article Thermal distribution in the PTFE–steel frictional pair
- Authors: Sedakova E.B.1, Kozyrev Y.P.1
-
Affiliations:
- Institute of Manufacturing Problems
- Issue: Vol 36, No 9 (2016)
- Pages: 727-730
- Section: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/226982
- DOI: https://doi.org/10.3103/S1068798X16090227
- ID: 226982
Cite item
Open Access
Access granted
Subscription Access
Abstract
Research on the wear of a PTFE–18Kh2N4MA steel pair indicates that the heat-distribution coefficient calculated from the Sharron formula for the polymer is too low. The transfer of polymer to the steel must be taken into account in determining that coefficient.
About the authors
E. B. Sedakova
Institute of Manufacturing Problems
Author for correspondence.
Email: elenasedakova2006@yandex.ru
Russian Federation, St. Petersburg
Yu. P. Kozyrev
Institute of Manufacturing Problems
Email: elenasedakova2006@yandex.ru
Russian Federation, St. Petersburg
Supplementary files
