Email this article Gun-Drill Insertion in Drilling Deep Holes by Means of Multifunctional Machine Tools
- Authors: Kirsanov S.V.1, Tsygankov R.S.1
-
Affiliations:
- Tomsk Polytechnic University
- Issue: Vol 38, No 11 (2018)
- Pages: 865-871
- Section: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/227563
- DOI: https://doi.org/10.3103/S1068798X18110060
- ID: 227563
Cite item
Open Access
Access granted
Subscription Access
Abstract
The drilling of deep holes by means of gun drills is investigated so as to establish the parameters of the guide hole and its production. The rate of change in the load on the tool is proportional to the active length of the primary cutting edge. Assessment of the smoothness of tool insertion on the basis of the rate of change in the load on the tool is proposed.
About the authors
S. V. Kirsanov
Tomsk Polytechnic University
Email: tsygankovrs@tpu.ru
Russian Federation, Tomsk
R. S. Tsygankov
Tomsk Polytechnic University
Author for correspondence.
Email: tsygankovrs@tpu.ru
Russian Federation, Tomsk
Supplementary files
