Self-Programming of the Tool Trajectory in CNC Lathes

V. A. Timiryazev; M. Z. Khostikoev; V. N. Konoplev; A. V. Vetyugov

doi:10.3103/S1068798X19020114

Self-Programming of the Tool Trajectory in CNC Lathes

Authors: Timiryazev V.A.¹, Khostikoev M.Z.², Konoplev V.N.³, Vetyugov A.V.³
Affiliations:
1. Stankin Moscow State Technical University
2. Gubkin Russian State University of Petroleum and Gas
3. Russian University of People’s Friendship
Issue: Vol 39, No 2 (2019)
Pages: 154-157
Section: Article
URL: https://journal-vniispk.ru/1068-798X/article/view/227650
DOI: https://doi.org/10.3103/S1068798X19020114
ID: 227650

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Methods of self-programming of the tool trajectory in CNC lathes are considered for the example of turning. By adaptive control, the longitudinal supply is regulated in accordance with the load that acts in cutting.

Keywords

self-programming, tool trajectory, adaptive control, turning, standard cycles, control software, programming, tool supply, margin, passes

About the authors

V. A. Timiryazev

Stankin Moscow State Technical University

Email: khostikoevmz@mail.ru
Russian Federation, Moscow

M. Z. Khostikoev

Gubkin Russian State University of Petroleum and Gas

Author for correspondence.
Email: khostikoevmz@mail.ru
Russian Federation, Moscow

V. N. Konoplev

Russian University of People’s Friendship

Email: khostikoevmz@mail.ru
Russian Federation, Moscow

A. V. Vetyugov

Russian University of People’s Friendship

Email: khostikoevmz@mail.ru
Russian Federation, Moscow

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register