Enviar artigo por via de e-mail Production of Large Disks from Cylindrical Blanks by Plastic Deformation. 3. Final Stage of Central-Punch Introduction
- Autores: Vorontsov A.L.1
-
Afiliações:
- Bauman Moscow State Technical University
- Edição: Volume 39, Nº 8 (2019)
- Páginas: 656-658
- Seção: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/227767
- DOI: https://doi.org/10.3103/S1068798X19080215
- ID: 227767
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
Abstract—The final stage of central-punch introduction during the plastic deformation of large disks or hard-to-deform disks is mathematically described. The maximum force of punch introduction at the end of deformation is determined
Palavras-chave
Sobre autores
A. Vorontsov
Bauman Moscow State Technical University
Autor responsável pela correspondência
Email: mt13@bmstu.ru
Rússia, Moscow, 105005
Arquivos suplementares
