Email this article Improving Rivet Performance by Ultrasonic Shock Treatment
- Authors: Fatyukhin D.S.1, Nigmetzyanov R.I.1, Sundukov S.K.1, Luzhnov Y.M.1, Kuznetsov S.Y.1
-
Affiliations:
- Moscow Automobile and Road Construction State Technical University (MADI)
- Issue: Vol 39, No 8 (2019)
- Pages: 703-704
- Section: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/227779
- DOI: https://doi.org/10.3103/S1068798X19080057
- ID: 227779
Cite item
Open Access
Access granted
Subscription Access
Abstract
The reliability of rivets is improved if the residual compressive stress is uniformly distributed over the joint thickness, with simultaneous decrease in the riveting forces required. The possibility of improving rivet performance by ultrasonic shock treatment is considered. On that basis, a riveting method is proposed. Its effectiveness is analyzed.
About the authors
D. S. Fatyukhin
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: mitriy2@yandex.ru
Russian Federation, Moscow, 125319
R. I. Nigmetzyanov
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: lefmo@yandex.ru
Russian Federation, Moscow, 125319
S. K. Sundukov
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: sergey-lefmo@yandex.ru
Russian Federation, Moscow, 125319
Yu. M. Luzhnov
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: mitriy@newmail.ru
Russian Federation, Moscow, 125319
S. Yu. Kuznetsov
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: drblack@lenta.ru
Russian Federation, Moscow, 125319
Supplementary files
