Additive Technology in Optimal Synthesis of Individual Vehicle Components and Mechanisms
- Authors: Ostroukh A.V.1, Subbotin B.S.1, Borisevich V.B.1, Ryabchinskii A.I.1, Kristal’nyi S.R.1
-
Affiliations:
- Moscow Automobile and Road Construction State Technical University (MADI)
- Issue: Vol 39, No 8 (2019)
- Pages: 710-712
- Section: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/227781
- DOI: https://doi.org/10.3103/S1068798X19080148
- ID: 227781
Cite item
Abstract
Experience in optimal synthesis of individual vehicle components and mechanisms on the basis of additive technology is analyzed. A list of basic additive technologies is presented. The benefits of additive technology in combination with three-dimensional computer simulation are noted. The possibility of visualizing CAE calculations by means of additive technology is considered. In addition, the role of additive technology in the manufacture of individual vehicle components and mechanisms is discussed.
About the authors
A. V. Ostroukh
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: ostroukh@mail.ru
Russian Federation, Moscow, 125319
B. S. Subbotin
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: nich@nich.madi.ru
Russian Federation, Moscow, 125319
V. B. Borisevich
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: vbborisevich51@mail.ru
Russian Federation, Moscow, 125319
A. I. Ryabchinskii
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: obd.kafedra-madi@mail.ru
Russian Federation, Moscow, 125319
S. R. Kristal’nyi
Moscow Automobile and Road Construction State Technical University (MADI)
Author for correspondence.
Email: sportauto@rambler.ru
Russian Federation, Moscow, 125319
Supplementary files
