Enviar artigo por via de e-mail Relation between the tool database and the CAM system in designing operations on a numerically controlled machine tool
- Autores: Grechishnikov V.A.1, Urmanov M.D.2, Khusainov R.M.3, Yurasov S.Y.3, Yurasova O.I.3
-
Afiliações:
- Stankin Moscow State Technical University
- PAO KAMAZ
- Naberezhnye Chelny Institute
- Edição: Volume 37, Nº 10 (2017)
- Páginas: 906-909
- Seção: Article
- URL: https://journal-vniispk.ru/1068-798X/article/view/227167
- DOI: https://doi.org/10.3103/S1068798X17100082
- ID: 227167
Citar
Acesso aberto
Acesso está concedido
Somente assinantes
Resumo
A method is proposed for formulating a tool database with reference to the machine tools and recommended operating conditions at a specific plant. The database may be used to program machining operations in a CAM system.
Palavras-chave
Sobre autores
V. Grechishnikov
Stankin Moscow State Technical University
Autor responsável pela correspondência
Email: v.grechishnikov@stankin.ru
Rússia, Moscow
M. Urmanov
PAO KAMAZ
Email: v.grechishnikov@stankin.ru
Rússia, Naberezhnye Chelny
R. Khusainov
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Rússia, Naberezhnye Chelny
S. Yurasov
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Rússia, Naberezhnye Chelny
O. Yurasova
Naberezhnye Chelny Institute
Email: v.grechishnikov@stankin.ru
Rússia, Naberezhnye Chelny
Arquivos suplementares
