Email this article Silicon Carbide Liquid-Phase Sintering with Various Activating Agents
- Authors: Perevislov S.N.1,2, Tomkovich M.V.3, Lysenkov A.S.4
-
Affiliations:
- St. Petersburg State Institute of Technology (Technical University)
- I. V. Grebenshchikov Institute of Silicate Chemistry of the Russian Academy of Sciences
- A. F. Ioffe Physical Technical Institute of the Russian Academy of Sciences
- A. A. Baikov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences
- Issue: Vol 59, No 5 (2019)
- Pages: 522-527
- Section: Article
- URL: https://journal-vniispk.ru/1083-4877/article/view/249140
- DOI: https://doi.org/10.1007/s11148-019-00265-6
- ID: 249140
Cite item
Open Access
Access granted
Subscription Access
Abstract
Silicon-carbide materials with 5 – 10 wt.% additions of oxides were prepared by liquid-phase sintering at 1860 – 2100 °C. The highest physicomechanical properties were achieved in SiC material containing 20 wt.% of a three-component eutectic composition in the MgO–Y2O3–Al2O3 system. The mechanical characteristics of liquid phase-sintered materials containing 15 wt.% of the three-component oxides additive exceed those of both the reactive-sintered and the solid-phase sintered materials and approach those of hot-pressed materials. Ill. 5. Ref. 30. Tab. 2.
About the authors
S. N. Perevislov
St. Petersburg State Institute of Technology (Technical University); I. V. Grebenshchikov Institute of Silicate Chemistry of the Russian Academy of Sciences
Author for correspondence.
Email: perevislov@mail.ru
Russian Federation, St. Petersburg; St. Petersburg
M. V. Tomkovich
A. F. Ioffe Physical Technical Institute of the Russian Academy of Sciences
Email: perevislov@mail.ru
Russian Federation, St. Petersburg
A. S. Lysenkov
A. A. Baikov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences
Email: perevislov@mail.ru
Russian Federation, Moscow
Supplementary files
