Effect of Firing Regime on the Structure and Properties of Highly Porous Ceramic Materials Based on Alumina-Magnesia Spinel
- Authors: Buchilin N.V.1, Lyulyukina G.Y.1, Varrik N.M.1
-
Affiliations:
- FGUP All-Russia Scientific Research Institute of Aviation Materials (VIAM)
- Issue: Vol 60, No 1 (2019)
- Pages: 55-60
- Section: Article
- URL: https://journal-vniispk.ru/1083-4877/article/view/249224
- DOI: https://doi.org/10.1007/s11148-019-00308-y
- ID: 249224
Cite item
Abstract
Results are provided for a study of sintering spinel porous ceramics using aluminum and magnesium oxides as starting components without sintering additives. It is shown that the optimum firing temperature range in order to prepare materials with an open-cellular porous structure is 1700 – 1730°C. It is established that preliminary heat treatment of oxides significantly affects material mechanical characteristics of. Materials are obtained with an interconnected porosity of up to 85% and compressive strength of up to 10 MPa.
About the authors
N. V. Buchilin
FGUP All-Russia Scientific Research Institute of Aviation Materials (VIAM)
Author for correspondence.
Email: isk11@yandex.ru
Russian Federation, Moscow
G. Yu. Lyulyukina
FGUP All-Russia Scientific Research Institute of Aviation Materials (VIAM)
Email: isk11@yandex.ru
Russian Federation, Moscow
N. M. Varrik
FGUP All-Russia Scientific Research Institute of Aviation Materials (VIAM)
Email: isk11@yandex.ru
Russian Federation, Moscow
Supplementary files
