Nº 4 (2014)

Articles

APPLICATION OF CONVENTIONAL SURFACES IN GRAPHIC DESIGN AND ENGINEERING OF SLIDES AND TOBOGGAN TRACKS TURNS

Misyura N., Mityushov E.

Resumo

This paper investigates the invariant algorithms for the forming of normal surfaces and examples in their usage in graphic design and in modeling of summer, winter, water slide and sledge track gutters are given. It is shown on the Guido Grandi spatial roses example, how the usage of analytical smooth rails of normal surfaces allows us to obtain the variety of decora- tive forms. A method for the modeling of safe slides is given by joint integration of Frenet equations, the equations for the dynamics of the unfree material point and the dynamical shap- ing of normal surfaces is presented.
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):3-9
pages 3-9 views

THE DYNAMIC STABILITY OF PHYSICALLY NONLINEAR PLATE SYSTEMS

Ivanov S., Ivanova A.

Resumo

In the article, the technique of dynamic stability analysis of plate systems having the non- linear diagram of material deformation is presented. The example of calculation of a flat- topped shell is given.
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):9-18
pages 9-18 views

OVERALL STABILITY BIFURCATION BEARING RECEIVER SKELETON-FRAME STRUCTURAL SYSTEM OF TALL OBJECTS

Inozemtzev V., Inozemtzeva O., Nachshintsev E.

Resumo

The article discusses the results of calculation of the critical load for high-rise buildings with a hinged frame design scheme (total resistance as the perception of horizontal (wind) loads, provided the kernel hardness (trunk bearing skeleton.) And hard (total resistance pro- vided by the carrier core columns, diaphragm stiffness a horizontal trunk and hard drives over- lap and cover)
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):18-23
pages 18-23 views

STRESS RELAXATION IN CURVED REINFORCED CONCRETE BEAM WITH REGARD TO STRUCTURAL DAMAGE

Larionov E.

Resumo

A stress relaxation of the curved reinforced concrete beam problem is studied in this arti- cle. The concrete and armature structural damages are also taken into account.
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):23-28
pages 23-28 views

INTERACTION OF CURVED CRACK FACES IN BENDING STRIP (BEAM) UNDER INFLUENCE OF TEMPERATURE FIELD

Mustafayev A.

Resumo

Some problems of temperature field influence on the growth inhibition of curved crack in the strip (beam) when the strip is bent in the plane by given load system (constant bending moments, uniformly distributed pressure and other) is consider. The equilibrium problem of curved crack with partially contacting faces under action of external loads, induced tempera- ture field and forces on the contacting crack surfaces is reduced to the problem of linear con- jugation of analytic functions. It is assumed that on some part of the contact faces engagement occurs and on other part the slip is possible.
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):29-41
pages 29-41 views

NON-LINEAR THERMOELASTIC DEFORMATION OF THE MULTIPHASE RODS

Mishchenko A.

Resumo

Предложена расчетная модель нелинейного термоупругого деформирования мно- гофазного стержня, основанная на разложении нормального напряжения по заданным базисным функциям. Разработан метод решения краевой задачи, базирующийся на се- кущих жесткостных характеристиках сечения стержня квазилинейной физической системы уравнений
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):42-51
pages 42-51 views

MODELLING OF REINFORCED CONCRETE COLUMNS OF RECTANGULAR CROSS SECTION IN COMPUTER PROGRAM "PRINS"

Agapov V., Vasiljev A.

Resumo

The super-element of column with rectangular cross section, suggested by authors earlier for linear analysis of columns of homogeneous materials, was developed with the purpose of reinforced concrete columns analysis. The element was implemented into a finite element pro- gram PRINS, and consisting of this program can be used for linear analysis of building struc- tures containing the reinforced concrete columns
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):52-57
pages 52-57 views

METHOD OF CALCULATION OF EXTENDED LARGE-PANEL BUILDINGS SUBJECTED TO FORCE AND TEMPERATURE ACTION

Buadze I., Gagnidze I., Ksenidi B.

Resumo

This paper presents the results of the developed method of calculation of large-panel ex- tended buildings subjected to the temperature action with taking into account inserted floors
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):57-62
pages 57-62 views

ON CALCULATION OF BARS LYING ON NONLOCAL ELASTIC BASE

Potapov V.

Resumo

The design of bars, lying on an elastic base is fulfilled usually with help of a simple model of the base proposed by Winkler-Zimmerman. This hypothesis was subjected to the repeated critics, because it doesn't take into account the influence of base fields, which are near to the point of the application of the concentrated force. Many models of the elastic base were proposed later by other authors, which allow to smooth away the indicated shortage of the Winkler-Zimmerman model. One more attempt of an improvement of this model is made in the present work
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):63-68
pages 63-68 views

EXPERIMENTAL STUDY OF NATURAL FREQUENCIES OF THREE-LAYERED HONEYCOMB PANELS WITH HOLES AND REPAIR SLEEVES

Safronov V.

Resumo

He paper presents a methodology and experimental research results of an experiment to determine the frequencies of the natural flexural vibrations of flat sandwich panels with cut inserts and repair various structures
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):69-73
pages 69-73 views

EXPERIMENTAL ANALYSIS OF THE RUPTURE OF POLYESTER-WOOD COMPOSITE UNDER

OLODO E., ADJOVI E., SHAMBINA S.

Resumo

The work is devoted to experimental study of polyester-wood composite under dynamic loading. Based on a thermodynamic approach, the objective is the evaluation of the specific energy of interfacial delamination in a multi-layer composite material under dynamic loading causing damage to it by cracking. For modeling of dynamic loading, it was used an experi- mental device based on the principle of the Charpy test which is to measure the residual en- ergy of a mass movement following a shock at speeds generally between 1 and 4 m/s, on a test piece cut of standardized dimensions requested in bending. Some of the available energy is consumed by rupture of the test piece. The results of this work showed that for a dynamic test, the fracture energy is function of the speed and impact energy of fall of the load. These results may be useful in the design of multilayer composite structures subjected to dynamic loads
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):73-79
pages 73-79 views

NIKOLAY ALEKSANDROVICh SOLOVEY (21.09.1946 - 31.03.2014)

- -.
Structural Mechanics of Engineering Constructions and Buildings. 2014;(4):80-80
pages 80-80 views

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».