Characterization of Zn2SnO4 Thin Films Prepared by RF Magnetron Sputtering
- Authors: Tang T.Y.1, Ren S.Q.1, Liu Y.1, Zhang J.Q.1, Liu C.1, Wu L.L.1, Wang W.W.1, Li W.1, Feng L.H.1
-
Affiliations:
- College of Materials Science and Engineering
- Issue: Vol 12, No 3 (2018)
- Pages: 503-509
- Section: Chemical Physics of Nanomaterials
- URL: https://journal-vniispk.ru/1990-7931/article/view/200582
- DOI: https://doi.org/10.1134/S1990793118030181
- ID: 200582
Cite item
Abstract
Zn2SnO4 (ZTO) is a stable semiconductor in ZnO–SnO2 system and important transparent conducting oxide (TCO) predominantly used in optoelectronic devices. ZTO thin films were prepared by RF magnetron sputtering using Zn2SnO4 ceramic target in this paper. The effects of annealing temperatures and oxygen contents on characterization of ZTO thin films were studied. The results show that ZTO thin films prepared by RF magnetron sputtering are amorphous with an optical band gap of 3.22 eV. After annealing at 650°C in Ar atmosphere for 40 min, ZTO films possess a spinel structure with an optical band gap of 3.62 eV. The atomic force microscope (AFM) data of morphology reveals that the surface roughness of films is about 2 nm. The results of energy dispersive spectrometer (EDS) show that the concentration ratio of Zn to Sn is in the range from 1.44 to 1.57. The results of Hall-effect-measurement system reveal that the resistivity of films varies from 102 to 10–1 Ωcm, carrier concentration is about 1017 cm–3, and mobility ranges from 100 to 101 cm2 v–1 s–1.
Keywords
About the authors
Tian Yu Tang
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Sheng Qiang Ren
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Yuan Liu
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Jing Quan Zhang
College of Materials Science and Engineering
Author for correspondence.
Email: zh_jq2000@263.net
China, Chengdu, 610064
Cai Liu
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Li Li Wu
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Wen Wu Wang
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Wei Li
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Liang Huan Feng
College of Materials Science and Engineering
Email: zh_jq2000@263.net
China, Chengdu, 610064
Supplementary files
