Microstructural model of twinning and detwinning processes of the martensitic phase in shape memory alloys

Cover Page

Cite item

Full Text

Abstract

Using the Cu–Al–Ni shape memory alloy as an example, the article substantiates an approach to describing at the microstructural level the processes of twinning and detwinning of the martensitic phase. The coordinated twinned martensitic structure is described by the Hadamard compatibility equation for deformations, the solution of which made it possible to determine the surfaces along which the shift occurs, the directions and the magnitude of sliding in an orthorhombic crystal cell corresponding to the material under consideration in the martensitic state, leading to the appearance and disappearance of the twin structure. It is shown that two types of twins simultaneously and inseparably exist in an alloy with shape memory: deformation and structural. The first is related to the deformation of a simple shear, that occurs in accordance with the Hadamard compatibility condition in a martensitic plate, which leads to bending this straight plate and the appearance of two elements rotated at a certain angle relative to
each other, which form this twin. The structural twin is formed from two parts, in each of which the orthorhombic crystal cells of martensite are identically oriented, but one of the axes of these cells changes its direction by 90° when moving to another part of the twin. The formation of a deformation twin initiates the occurrence of a simple shear strain in the medium, and a structural twin initiates a structural strain. It is shown that a certain position of the structural twin in the deformation one leads to the equality of these strains.

About the authors

Anatoly A. Rogovoy

Institute of Continuous Media Mechanics UB RAS

Author for correspondence.
Email: rogovoy@icmm.ru
ORCID iD: 0000-0003-1723-0067
https://www.mathnet.ru/person53988

Dr. Phys. & Math. Sci., Professor; Chief Researcher; Lab. of Nonlinear Mechanics of Deformable Solids

Russian Federation, 614018, Perm, Academician Korolev str., 1

References

  1. Bhattacharya K. Wedge-like microstructure in martensites, Acta Metal. Mater., 1991, vol. 39, no. 10, pp. 2431–2444. DOI: https://doi.org/10.1016/0956-7151(91)90023-T.
  2. Hane K. F., Shield T. W. Symmetry and microstructure in martensites, Philos. Mag. A, 1998, vol. 78, no. 6, pp. 1215–1252. DOI: https://doi.org/10.1080/01418619808239984.
  3. Hane K. F., Shield T. W. Microstructure in a copper–aluminium–nickel shape memory alloy, Proc. R. Soc. Lond. A, 1999, vol. 455, no. 1991, pp. 3901–3915. DOI: https://doi.org/10.1098/rspa.1999.0482.
  4. Hane K. F., Shield T. W. Microstructure in a cubic to orthorhombic transition, J. Elast., 2000, vol. 59, pp. 267–318. DOI: https://doi.org/10.1023/A:1011051204615.
  5. Vedantam S. Constitutive modeling of Cu–Al–Ni shape memory alloys, Doctoral Dissertation. Massachusetts, Massachusetts Institute of Technology, 2000. https://dspace.mit.edu/handle/1721.1/34342.
  6. Vedantama S., Abeyaratneb R. A Helmholtz free-energy function for a Cu–Al–Ni shape memory alloy, Int. J. Non-Linear Mechan., 2005, vol. 40, pp. 177–193. DOI: https://doi.org/10.1016/j.ijnonlinmec.2004.05.005.
  7. Truesdell C. A First Course in Rational Continuum Mechanics, vol. 1: General Concepts, Pure and Applied Mathematics, vol. 71. New York, Academic Press, 1977, xxiii+280 pp.
  8. Likhachev V. A., Malinin V. G. Strukturno-analiticheskaia teoriia prochnosti [Structural and Analytical Theory of Strength]. St. Petersburg, Nauka, 1993, 471 pp. (In Russian)
  9. Panin V. E. Fundamentals of physical mesomechanics, Fiz. Mezomekh., 1998, vol. 1, no. 1, pp. 5–22 (In Russian). EDN: KWPHTL.
  10. Panin V. E., Egorushkin V. E. Basic physical mesomechanics of plastic deformation and fracture of solids as hierarchically organized nonlinear systems, Fiz. Mezomekh., 2015, vol. 18, no. 5, pp. 100–113 (In Russian). EDN: UXWCCP. DOI: https://doi.org/10.24411/1683-805X-2015-00058.
  11. Trusov P. V., Shveikin A. I. Mnogourovnevye modeli mono- i polikristallicheskikh materialov: teoriia, algoritmy, primery primeneniia [Multilevel Models of Mono- and Polycrystalline Materials: Theory, Algorithms, Application Examples]. Novosibirsk, Sibirsk. Otd. RAN, 2019, 605 pp. (In Russian). EDN: BCSSTZ.
  12. Trusov P. V., Ashikhmin V. N., Volegov P. S., Shveykin A. I. Constitutive relations and their application to the description of microstructure evolution, Fiz. Mezomekh., 2009, vol. 12, no. 3, pp. 61–71 (In Russian). EDN: LAJDAL.
  13. Trusov P. V., Shveykin A. I., Kondratiev N. S., Yants A. Yu. Multilevel models in physical mesomechanics of metals and alloys: Results and prospects, Fiz. Mezomekh., 2020, vol. 23, no. 6, pp. 33–62 (In Russian). EDN: ZDSCJX. DOI: https://doi.org/10.24411/1683-805X-2020-16003.
  14. Belyaev F. S., Evard M. E., Volkov A. E. Simulation of the plastic deformation of shape memory alloys considering shear anisotropy on the slip plane, Mater. Phys. Mech., 2023, vol. 51, no. 1, pp. 61-67. EDN: EBDDNG DOI: https://doi.org/10.18149/MPM.5112023_6.
  15. Belyaev F. S., Volkov A. E., Evard M. E. Microstructural modeling of reversible and irreversible deformation under cyclic thermomechanical loading of titanium nickelide, Tambov Univ. Reports. Ser. Natural Techn. Sci., 2013, vol. 18, no. 4, pp. 2025–2026 (In Russian). EDN: RAISVF.
  16. Rogovoy A. A., Stolbova O. S., Stolbov O. V. Numerical simulation of evolution of magnetic microstructure in Heusler alloys, J. Appl. Mech. Techn. Phys., 2021, vol. 62, no. 5, pp. 870–881. EDN: VTJJCS. DOI: https://doi.org/10.1134/S0021894421050199.
  17. Rogovoy A. A., Stolbova O. S. Microstructural modeling of the magnetization process in Ni$_2$MnGa alloy polytwin crystals, Magnetochem., 2022, vol. 8, no. 8, 78. EDN: CUASII. DOI: https://doi.org/10.3390/magnetochemistry8080078.
  18. Rogovoy A. A., Stolbova O. S. Microstructural model of the behavior of a ferroalloy with shape memory in a magnetic field, Mech. Adv. Mater. Struct., 2022, vol. 31, no. 2, pp. 387–406. EDN: ZAQSCS. DOI: https://doi.org/10.1080/15376494.2022.2114046.
  19. Rogovoy A. A., Stolbova O. S. Microstructural model of magnetic and deformation behavior of single crystals and polycrystals of ferromagnetic shape memory alloy, Magnetochem., 2023, vol. 9, no. 2, 40. EDN: QIEPUX. DOI: https://doi.org/10.3390/magnetochemistry9020040.
  20. Rogovoy A. A., Stolbova O. S. Microstructural model of magnetic and deformation behavior of single crystals and polycrystals of ferromagnetic shape-memory alloy, In: H. Altenbach, V. Eremeyev (eds). Advances in Linear and Nonlinear Continuum and Structural Mechanics, Advanced Structured Materials, 198. Cham, Springer, pp. 397–442. DOI: https://doi.org/10.1007/978-3-031-43210-1_23.
  21. Rogovoy A. A., Stolbova O. S. An approach to describe the twinning and detwinning processes of the martensitic structure in ferromagnetic alloy with shape memory in magnetic and force fields, Mech. Adv. Mater. Struct., 2024 (to appear). DOI: https://doi.org/10.1080/15376494.2024.2355627.
  22. Rogovoi A. A. Formalizovannyi podkhod k postroeniiu modelei mekhaniki deformiruemogo tverdogo tela. Chast’ 1. Osnovnye sootnosheniia mekhaniki sploshnykh sred [A Formalized Approach to the Construction of Models of Deformable Solid Mechanics. Part 1. Basic Relations of Continuum Mechanics]. Perm’, Uralsk. Otd. RAN, 2020, 288 pp. (In Russian). EDN: UTXNLG.
  23. Kosilov A. T., Yuriev V. A. Profiled Cu–Al–Ni single crystals with pseudoelasticity and shape memory effects, Mezhdun. Nauchn. Zhurn. Alternativn. Energetika Ekologiia, 2015, no. 3, pp. 49–61 (In Russian). EDN: TPPDCP.
  24. Otsuka K., Shimizu K. Morphology and crystallography of thermoelastic Cu–Al–Ni martensite analyzed by the phenomenological theory, Trans. JIM, 1974, vol. 15, no. 103–108. DOI: https://doi.org/10.2320/matertrans1960.15.103.
  25. Lur’e A. I. Nelineinaia teoriia uprugosti [Nonlinear Theory of Elasticity]. Moscow, Nauka, 1980, 512 pp. (In Russian)
  26. James R. D. Finite deformation by mechanical twinning, Arch. Ration. Mech. Anal., 1981, vol. 77, pp. 143–176. DOI: https://doi.org/10.1007/BF00250621.
  27. Gurtin M. E. Two-phase deformations of elastic solids, Arch. Ration. Mech. Anal., 1983, vol. 84, pp. 1–29. DOI: https://doi.org/10.1007/BF00251547.
  28. Yasunaga M., Funatsu Y., Kojima S., et al. Measurement of elastuc constant, Scripta Metallurg., 1983, vol. 17, no. 9, pp. 1091–1094. DOI: https://doi.org/10.1016/0036-9748(83)90460-X.

Supplementary files

Supplementary Files
Action
1. JATS XML
2. Figure 1. Cubic $\rm D0_3$ unit cell (a) and the diagonal plane containing vectors $\tilde{{\boldsymbol e}}_1$ and $\tilde{{\boldsymbol e}}_3$ or vectors $\tilde{{\boldsymbol e}}_2$ and $\tilde{{\boldsymbol e}}_3$ (b); atoms are shown not on all faces and edges in figure (a)

Download (97KB)
3. Figure 2. The arrangement of the tetragonal crystal cell in cubic cells; atoms are shown not on all faces and edges of the tetragonal cell cubes

Download (87KB)
4. Figure 3. The arrangement of the tetragonal crystal cell relative to a fixed cubic cell

Download (63KB)
5. Figure 4. The position of sections of orthorhombic crystal cells of martensite relative to the section of the cubic cell of austenite, the normal to the slip plane, and the direction of the slip vector in orthorhombic cells

Download (94KB)
6. Figure 5. Deformation twin and the position of structural twin elements within it; the shear angle coincides with the angle of the martensitic plate's kink

Download (53KB)
7. Figure 6. (a) Deformation twin and the position of structural twin elements within it; the shear angle does not coincide with the angle of the martensitic plate's kink; (b) Regarding the definition of the relationship between the shear and fracture angles; $AC$ in figures (a) and (b) is the same material line

Download (85KB)

Copyright (c) 2024 Authors; Samara State Technical University (Compilation, Design, and Layout)

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».