Direct Synthesis of Al-B-SBA-15 and Its Application in Preparing of Bifunctional Platinum Catalyst for Hydrogenation of Tetralin
- Authors: Ngo Thi Thanh Hien 1, Kien P.T.2, Vu N.A.1, Huyen P.T.1
-
Affiliations:
- School of Chemical Engineering, Hanoi University of Science and Technology
- Military Institute of Chemistry and Environment
- Issue: Vol 11, No 1 (2019)
- Pages: 59-64
- Section: Catalysis in Chemical and Petrochemical Industry
- URL: https://journal-vniispk.ru/2070-0504/article/view/203053
- DOI: https://doi.org/10.1134/S2070050419010069
- ID: 203053
Cite item
Abstract
In this work, the mesoporous material Al-B-SBA-15 has been obtained by direct synthesis method with Si : B : Al ratio of 10 : 0.5 : 0.5. Wetness impregnation (WI) method was used to load platinum on Al-B-SBA-15. The prepared support and catalyst were characterized by nitrogen adsorption–desorption measurement (BET), XRD, TEM, and TPD-NH3 to investigate the influence of boron and aluminium on characteristics of the catalyst. The activity of the bifunctional catalyst was tested for hydrogenation of tetralin at 180–220°C, hydrogen pressure of 1.5–2.5 MPa for 3 h.
About the authors
Ngo Thi Thanh Hien
School of Chemical Engineering, Hanoi University of Science and Technology
Email: huyen.phamthanh@hust.edu.vn
Viet Nam, Hanoi
Pham Trung Kien
Military Institute of Chemistry and Environment
Email: huyen.phamthanh@hust.edu.vn
Viet Nam, Hanoi
Nguyen Anh Vu
School of Chemical Engineering, Hanoi University of Science and Technology
Email: huyen.phamthanh@hust.edu.vn
Viet Nam, Hanoi
Pham Thanh Huyen
School of Chemical Engineering, Hanoi University of Science and Technology
Author for correspondence.
Email: huyen.phamthanh@hust.edu.vn
Viet Nam, Hanoi
Supplementary files
