Email this article Enhancement of mechanical and tribotechnical properties of structural steel by electrical discharge machining
- Authors: Mashkov Y.K.1, Baybaratskaya M.Y.2, Alimbayeva B.S.2
-
Affiliations:
- Omsk State Technical University
- Omsk Autoarmoured Engineering Institute
- Issue: Vol 7, No 1 (2016)
- Pages: 115-118
- Section: Article
- URL: https://journal-vniispk.ru/2075-1133/article/view/204759
- DOI: https://doi.org/10.1134/S2075113316010135
- ID: 204759
Cite item
Open Access
Access granted
Subscription Access
Abstract
A thermodynamic model of an open system of alloying electrode–workpiece is proposed. Results of investigation on the influence of the material of alloying electrodes and machining conditions on the phase composition, topography, and mechanical and tribotechnical properties of processing surfaces are considered.
About the authors
Yu. K. Mashkov
Omsk State Technical University
Author for correspondence.
Email: malij_olga@mail.ru
Russian Federation, pr. Mira 11, Omsk, 644050
M. Yu. Baybaratskaya
Omsk Autoarmoured Engineering Institute
Email: malij_olga@mail.ru
Russian Federation, 14 military town, Omsk, 644098
B. Sh. Alimbayeva
Omsk Autoarmoured Engineering Institute
Email: malij_olga@mail.ru
Russian Federation, 14 military town, Omsk, 644098
Supplementary files
