Email this article Corrosion resistance improvement of 30XGCN2A steel by ion implantation using cathodes based on immiscible components
- Authors: Ovchinnikov V.V.1, Borovin Y.M.1, Lukyanenko E.V.1, Kurbatova I.A.1, Yakutina S.V.1
-
Affiliations:
- Moscow State University of Mechanical Engineering (MAMI)
- Issue: Vol 7, No 4 (2016)
- Pages: 570-575
- Section: Article
- URL: https://journal-vniispk.ru/2075-1133/article/view/205378
- DOI: https://doi.org/10.1134/S2075113316040262
- ID: 205378
Cite item
Open Access
Access granted
Subscription Access
Abstract
Research results of the corrosion resistance of 30XGCN2A steel after irradiation by a polyion beam using an implanter of copper, lead, monotectic alloy of 64% Cu–36% Pb (MA), and MA + Sn and MA + Al alloys as a cathode are given. An increase in the corrosion resistance of implanted samples during a total corrosion test carried out in a salt-spray chamber, as well as an increase in the electrode potential threshold value of the pitting corrosion when using an implanter of MA + Sn and MA + Al alloys as a cathode, is observed.
About the authors
V. V. Ovchinnikov
Moscow State University of Mechanical Engineering (MAMI)
Author for correspondence.
Email: vikov1956@mail.ru
Russian Federation, Moscow
Yu. M. Borovin
Moscow State University of Mechanical Engineering (MAMI)
Email: vikov1956@mail.ru
Russian Federation, Moscow
E. V. Lukyanenko
Moscow State University of Mechanical Engineering (MAMI)
Email: vikov1956@mail.ru
Russian Federation, Moscow
I. A. Kurbatova
Moscow State University of Mechanical Engineering (MAMI)
Email: vikov1956@mail.ru
Russian Federation, Moscow
S. V. Yakutina
Moscow State University of Mechanical Engineering (MAMI)
Email: vikov1956@mail.ru
Russian Federation, Moscow
Supplementary files
