Editorial Policies

Aims and Scope

The mission of the journal is to provide an open platform for the information exchange and publicity for various original research evidence obtained by the authors of publications as results of conducted tests or experiments in the field of mechanical engineering, metalworking, materials science and metallurgy.

The tasks of the journal: to publish to all concerned scientific community the results of scientific research, to view the effectiveness of new research methods; to discuss modern theory trends; to inform readers about the results of Russian and international scientific conferences and forums; to raise the professional level of researchers, machine-building specialists, technical universities educators; to improve the quality of the journal's content in accordance with the requirements of international standards and global citation indexes; to increase the accessibility of the journal for authors and readers; to arrange stable ways of journal circulation.

The policy of the editorial board of the journal is aimed at no breach of laws by all the members, including founders, publishers, authors, editors, reviewers, members of the editorial Board and the editorial staff of the customized edition, i.e. complying with the laws of the Russian Federation on copyright, adherence to the Declaration of Ethics for the publications of the Editorial Board, based on the Sarajevo Declaration on the Integrity and Visibility of Scientific Publications (2017) and the Declaration "Ethical Principles of Scientific Publications" adopted by AIRP (Alliance of Independent Regional Publishers, 2017)

The editorial board of the journal does not do with manuscripts submitted for publication in other editions. In the event of the discovery of this fact, the editorial board of the journal will have to retract (withdraw) such a publication. Information about the retraction of articles is posted on the publication's website, also it can be found in the issues of the journal and the State Comission for Academic Degrees and Titles of the Ministry of Science and Higher Education of the Russian Federation and the Council on Ethics of Scientific Publications of AIRP.

The Editorial Bboard carries out academic peer review (double-blind) of all materials submitted to the editorial board for providing evaluation. All the reviewers are acknowledged experts on the subject of peer-reviewed materials; both members of the Editorial Board of the journal and outside experts are mission-driven. The reviews are kept in the publishing house and editorial office for 5 years. The materials are viewed in the order of their arrival at the editorial Board of the journal and published after their approval; the change in the order of review or publication of articles is not provided for. The decision for publication is based on the originality, reliability, scientific significance and relevance of the work in question. The Editorial Council and the Editorial Board of the publication are fully responsible for the decisions made.

The Editorial Board of the journal does not provide any services, including agency services for paid. Articles are accepted only from article writers. No charge is applied for the contributors related to the preparation, inserting and printing of materials. There are no accelerated deadlines for the publication of articles. The journal does not come into line with intermediaries.

The journal is included in the publications listing of the State Commission for Academic Degrees and Titles approved for academic degree candidates in the following scientific specialties: 2.5.3 - Friction and wear in machines; 2.5.5 - Processing technique and equipment of mechanical and physico-engineering treatment; 2.5.6 - Mechanical engineering technology; 2.5.7 - Processing technique and pressing machines; 2.5.8 - Welding, allied processes and related technologies; 2.6.17 - Materials science (branch-wise) (technical sciences).

Main sections:

Materials science in mechanical engineering

Technology and equipment of metal processing by pressure

Welding, related processes and technologies

Additive technologies and laser processing

Technologies of mechanical processing of workpieces

Technologies of electromachining and combined processing

Science intensive technologies of nonmetallic parts production

Technological processes automated control

Science intensive technologies in machine assembly

Surface layer quality, contact interaction, friction and wear of machine parts

Technological support of operational properties of machine parts and their connections

Science intensive technologies in coating, parts repair and recovery

Bryansk State Technical University received a valid DOI prefix in February 2018 and appears in the registration agency Crossref as an independent publisher (Bryansk State Technical University).

 
 

Peer Review Process

Journal edition reviews all materials submitted to the editorial office that correspond to the subject matters for their evaluation. All reviewers hold a PhD of Engineering. All reviewers are recognized experts in the field of the reviewed materials and have papers in the same scope published within the last 3 years. The recommendations of the reviewers are the basis for making a decision on the publication of the article. The review in the form of a copy is submitted to the editorial board of the journal within the time limits set by the editorial board. The reviewers may be members of the editorial board of the journal.

When positive (or negative) reviews of the article in question are received by the editorial board, one of the members of the editorial board, who is in supervision of the section in which this article is supposed to be published, the editor-in-chief or deputy editor-in-chief, observes it and decides on the possibility of its publication or rejection.

The reviewers of the journal follow exclusively "double blind" peer review policy, that is the identities of the reviewer and the author are withheld from reviewers, and vice versa, throughout the review process. To facilitate this, authors need to make sure that their manuscripts are prepared in a way that withhold their identity. For simplicity of this preparation, please make sure of the following when submitting your application: send your information kit accompanied by a Blind manuscript without information about the author and as a separate file.

Information content for a Blind manuscript preparation:

  1. Besides clear need of removing names and references under the title in the manuscript, some other steps must be taken to make sure that the manuscript is properly prepared for double-blind review. To help in this process, the following key points are required
  2. Use a third party to refer to work previously performed by the authors, for example, replace any phrases like “as we showed earlier” with “... it was shown earlier [Anonymous, 2017]".
  3. Make sure that the drawings do not contain any identifiers associated with the authoring. Do not exclude significant references to yourself or other references, but limit references only to articles that are relevant to those who review the submitted article.
  4. Remove links to funding sources.
  5. No acknowledgements
  6. Remove any identifying information from the file names, including the names of the authors, make sure that the document properties are also anonymized.

 

Publication Frequency

Rules of Publication

  1. The editorial board evaluates the submitted documents in terms of their completeness (in accordance with paragraph 4), screens the text of the paper for unoriginal material using "Antiplagiat" system and reviews the papers in terms of relevance, scientific novelty, quality, compliance with the main scientific and technical fields of the journal.
  2. If the paper is returned for revision by the editorial board recommendation (up to 7 working days), the journal indicates the date of receiving the corrected text.
  3. Authors of papers are not paid a fee; papers are published free of charge.

Requirements to the publications: :https://bstu.editorum.ru/ru/nauka/journal/79/view#about-journal

The papers that do not correspond to the subject matter of the journal and those not meeting its requirements, as well as submitted not in full completeness, will not be accepted. Manuscripts are not returned to their authors. The editorial board is not obliged to review all incoming materials and does not discuss rejected manuscripts with the authors.

 

Open Access Policy

The policy of the editorial board of the journal is aimed at no breach of laws by all the members, including founders, publishers, authors, editors, reviewers, members of the editorial Board and the editorial staff of the customized edition, i.e. complying with the laws of the Russian Federation on copyright, adherence to the Declaration of Ethics for the publications of the Editorial Board, based on the Sarajevo Declaration on the Integrity and Visibility of Scientific Publications (2017) and the Declaration "Ethical Principles of Scientific Publications" adopted by AIRP (Alliance of Independent Regional Publishers, 2017)

The editorial board of the journal does not do with manuscripts submitted for publication in other editions. In the event of the discovery of this fact, the editorial board of the journal will have to retract (withdraw) such a publication. Information about the retraction of articles is posted on the publication's website, also it can be found in the issues of the journal and the State Comission for Academic Degrees and Titles of the Ministry of Science and Higher Education of the Russian Federation and the Council on Ethics of Scientific Publications of AIRP.

 

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».