No 2 (2008)
- Year: 2008
- Articles: 19
- URL: https://journal-vniispk.ru/2312-8143/issue/view/23665
Articles
TENDENCY DEVELOPMENT TO NANOTEHNOLOGIS
Abstract
The definition of the «nanostructured materials» is formulated. Are shown the beginnings of development nanotehnologis, are marking achievement of useful result with least expenditures.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):5-8
5-8
THE COMPUTERIZED BALANCING OF THE SPINDLE OF ESPECIALLY EXACT MACHINE TOOL UP TO LEVEL OF NANOMETR
Abstract
In this work the methods of the computerized balancing allowing considerably to reduce its duration by use of new approaches to traditional methods of trial start-up, and also a method of active influence on the fluctuations caused imbalance are considered.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):9-14
9-14
COMPARATIVE ANALYSIS OF SUPERHEAD CERAMIC GRINDING
Abstract
The definition of the «Grinding Coefficient» ( G ) is formulated. The relationship between the grinding coefficient and hardness of materials is shown. Test results of circular grinding of superhead ceramic materials are presented.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):15-21
15-21
CHECKING THE DEFLECTIONS OF PROFILE OF BLISTERS SURFACE IN PROCESS OF PROCESSING
Abstract
The method description of checking the deflections of profile of blister surface in about-cession of processing is given. Presented installation for checking the deflections. Software was designed. The prospects of automatic system development in the field of checking a quality of products were shown.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):22-28
22-28
THE ASSEMBLING SIZE CHAIN OPTIMIZATION ON THE DESIGNING STAGE
Abstract
Calculation procedure of the assembling size chains on the designing stage is considered. Variants of optimization of the concluding link limit deviation using principle of equal accuracy are suggested.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):29-34
29-34
EXPERIMENTAL OSCILLATION ANALYSIS OF ATTACHMENT POINT OF CUTTING BLADE
Abstract
The erection diagram of the piezoelectric transducer is given. The calibration diagram and the gain-frequency characteristic of piezoelectric transducer are produced. The frequency range and correction factors are adduced.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):35-38
35-38
39-43
EXPERIMENTAL RESEARCH OF STRESS OF GRAINS AND INTER-GRAIN BOUNDS IN A MODEL OF HETEROGENEOUS STRUCTURE MATERIALS
Abstract
In this research physical modeling is applied to investigate stress condition of carbide cutting tools as heterogeneous structure using method of photo elasticity. The photogram pattern interpreted and reveals the overall stress distribution in elasto-plastic bounds of rigid grains of the material.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):44-47
44-47
EXPERIENCE OF OPTICAL-POLARIZATION MODELLING OF THE STRUCTURALLY-NON-HOMOGENOUS MATERIAL AREA
Abstract
The intense-deformed condition of grains and layers of non-homogenous materials are studying on optical-polarization models. The fields of pressure of cutting are modelling in the turning zone of non-homogenous materials adjoining to a forward side of a cutting edge.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):48-51
48-51
OPERATION RESEARCH
Abstract
The definition of the «Operation research» (OR) is given. The main sense of the mathematical model as a tool of OR is described. The practical implementation of the OR is discussed.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):52-55
52-55
ESTIMATION OF THE CONDITION OF PREPARATIONS IN THE AUTOMATED MANUFACTURE BY ACOUSTIC METHODS
Abstract
The results that aimed to find out the presence of abscess and caverns by vibroacoustic methods on workpieces which were appeared after the early pass, to evaluate medium hardness of a production run delivered to a workpieces range, etc. are given here.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):56-61
56-61
62-66
ZERO-DIMENTIONAL CHEMICAL-KINETICS HCCI RESEARCH
Abstract
Carried out the estimation of HCCI combustion process dependencies from inlet temperature, compression ratio and equivalence ratio using the natural gas chemical-kinetic mechanism GRI-Mech 3 .
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):67-73
67-73
74-79
INFLUENCE LOWAND HIGH TEMPERATURE EGR TO WORKING PROCESS ICE
Abstract
Influence of temperature exhaust gases recirculation (EGR) on parameters of working process in piston engines is considered. EGR it is important not only as one of methods of reduction toxicity of exhaust gases to ICE, but also a way of management of working process of engines with homogeneous charge compression ignition.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):80-84
80-84
85-89
THE ANALYSIS OF THE CYCLE PISTON ICE AT POLYTROPIC PROCESS OF COMPRESSION-EXPANSION
Abstract
The analysis of a cycle of the piston engine based on a thermodynamic cycle with the mixed supply of heat in which compression and expansion are considered as polytropic processes with constants to parameters n 1 and n 2 is resulted, accordingly, that their influence on the basic parameters of a cycle allows to reveal.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2008;(2):90-94
90-94
95-99
100-105