编号 3 (2015)

Articles

TWO-STAGE SYNTHESIS OF CONTROL SYSTEM BY THE NETWORK OPERATOR METHOD

Diveеv A., Shmalko E.

摘要

The paper focuses on the problem of control system synthesis and a numerical method of the network operator is proposed to search a solution. Apart from a well-known approach when the stated control synthesis problem is solved directly by the method of network operator considering given criteria and terminal conditions, the present paper describes a two-stage synthesis. The first stage is supposed to solve numerically a set of optimal control tasks for different initial values from some given space. The second stage makes an approximation of the previously received optimal trajectories by means of the network operator. An example illustrates the two-stage synthesis of a control system for a spaceship descent to the Moon
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):7-16
pages 7-16 views

BIAXIAL STRETCHING OF THE PLATE A CIRCULAR HOLE

Makarov E., Monakhov I., Nefedova I.

摘要

The paper presents the solution of the problem of stress-strain state of the plate under biaxial stretching in the case where the hole is free of loads and when the hole is loaded embedded in it or soldered rigid washer
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):17-22
pages 17-22 views

SYNTHESIS OF Н-ROBUST CONTROLLER FOR MOTORBIKE STABILIZATION

Pupkov K., Andrikov D., Sinelshchikova M., Andrikov D.

摘要

The paper presents the influence of level of tolerance as main parameter of H-robust control theory. The model of control object is developed. The actuator is a hydraulic cylinder with a feedback potentiometer with conducting windings. For practical application technological effectiveness of actuator’s design is considered
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):23-31
pages 23-31 views

MATHEMATICAL MODEL TO DETERMINE THE AVERAGE ANNUAL PRECIPITATION USING RASTER AND OTHER GIS ELEMENTS

Fermin C., Sinichenko E., Gritsuk I.

摘要

In this paper it is developed a mathematical model, based on the use of geographic information systems (GIS) to calculate the average annual precipitation by geographical coordinates. The case of the hydrographic demarcation of Manabi (Ecuador) is analyzed.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):32-40
pages 32-40 views

ANALYSIS OF DATA OF METEOROLOGICAL STATIONS OF THE PROVINCE OF THE MANABA

Campos C., Sinichenko E., Gritsuk I.

摘要

The quantity of rain rainfall in Ecuador depending on climatic zones (Costa, Sierra and Oriyente) fluctuates within 200-5000 mm a year [4]. In this work the analysis of long-term series of observations of meteorological stations in the province Manabi during the period from 1963 to 2013 is made. When lengthening short series of observations the method of orthogonal regression was applied. Isolines of rain mean annual rainfall are as a result built and their average annual volume, important in the field of design of hydraulic engineering constructions for system of water supply is determined
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):41-49
pages 41-49 views

THE INFLUENCE OF LOCAL-MATERIALS INFILL IN REINFORCED CONCRETE STRUCTURES IN REPUBLIC OF BURUNDI

Mikerego E.

摘要

This paper is about the influence of masonry-wall infill in structures and the needed technical solution considering the influence of local-materials in designing and building of reinforced concrete structures in republic of Burundi
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):50-54
pages 50-54 views

AUTOMATED SYSTEM FOR MEASURINGTHE PARAMETERS OF DIFFRACTION ON POLYMER FILMS WITH PERIODIC MICRORELIEF

Belyaev V., Savtsov K., Moyseyenko S., Gorbunov A., Popov I., Volynsky A., Pupkov K., Margaryan H., Solomatin A., Bunkina N.

摘要

An automated system for measuring the diffraction efficiency of light, as well its kinematic scheme, were designed and assembled. The measurements of the diffraction efficiency of light on the sample of polymeric substrates with periodic microrelief were carried out. The software is developed in Matlab environment for the construction of the diffraction pattern of the geometric parameters and wavelength. By using software as well as the results of measurement of the light diffraction efficiency the microrelief period was determined too. The correctness of the period was checked by an independent method
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):55-64
pages 55-64 views

TO THE PROSPECTING OF LODE GOLD DEPOSITS IN DIFFICULT MOUNTAIN-TAIGA LANDSCAPES: THE MIDDLE-ISHIMBINSK AREA OF YENISEI GOLD PROVINCE (KRASNOYARSK REGION)

Mansurov R.

摘要

The paper is devoted to the new methods of prospecting of lode gold deposits in difficult mountain- taiga landscapes. Their efficiency and the preliminary results of exploration for the Sredne-Ishimbinskaya area in Yenisei gold province are discussed. For the first time in the region we prognosticate the detection of large-dimension stockwork-type gold mineralization with lower average gold concentration related with gold-sulphide-quartz geological and industrial type of mineralization, localized in carbonate- terrigenous sediments of the Middle Riphean
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):65-71
pages 65-71 views

PRINCIPAL ELEMENTS OF GOLD MINERALIZATION PROSPECTING MODEL OF THE PROSPECTIVE AREA SOUTHERN WITHINSREDNE-ISHIMBINSKAYA AREA OF YENISEI GOLD PROVINCE

Mansurov R.

摘要

The paper is devoted to principal elements preliminary identificated of gold mineralization prospecting model of the prospective area Southern within Sredne-Ishimbinskaya area (central part of Yenisei gold province). The results of the comparative analysis of the object of research with known gold deposits of the Yenisei Ridge are presented
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):72-82
pages 72-82 views

CONDITIONS OF HYDROCARBONGENERATION IN SEDMENTARYBASINS OF NORTH AFRICA

Dolginov E., Zamil M.

摘要

Hydrocarbons in sedimentary basins of North Africa began to form at different times at high temperature relatively for platform conditions. In this work reviewed the variants of the possible reasons for this phenomenon
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):83-89
pages 83-89 views

WORLD SURVEY OF TECHNOLOGY OF GAS PRODUCTION FROM GAS HYDRATES

Vorobiev A., Golobthenko M., Yankevsky A.

摘要

The work analyzes the world’s methods of extracting natural gas from the solid gas hydrates, as well as disadvantages that arise when using these methods. The examples of natural gas extraction from gas hydrates methods depressurization, heating and the addition of an inhibitor. Considered such difficulties as the gasifying gas hydrate spontaneously pressure reduction or temperature increase, and the fact that the pressure reduction without heat input leads to endothermic cooling
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):90-95
pages 90-95 views

INNOVATIVE TECHNOLOGIES OF ENHANCED OIL RECOVERY AND WATERCUT REDUCTION ON SAMOTLOR OIL FIELD

Vorobiev A., Malyukov V., Galuzinskiy I.

摘要

The article contains analyse of principal innovative technologies of enhanced oil recovery and watercut reduction on Samotlor oil field on the late stage of development, principle differences of utilised technologies with an appraise of their effectiveness
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):96-101
pages 96-101 views

INNOVATIVE TECHNOLOGY OF IMPROVING HEAVY OIL RECOVERY FROM HETEROGENEOUS OIL RESERVOURS OF TATARSTAN

Malyukov V., Alibekov M.

摘要

The article analyzes the innovative technology of improving heavy oil recovery from heterogeneous oil reservoirs of Tatarstan by using SAGD technology through horizontal wells.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):102-110
pages 102-110 views

APPLICATION OF CIRCULAR SURFACES TO THE ARCHITECTURE OF THE BUILDINGS, STRUCTURES AND PRODUCTS

Ivanov V., Rynkovskaya V.

摘要

The article shows the main achievements of the construction science in the field of thin-walled spatial structures based on cyclical surfaces, which are used to choose the form of public and residential buildings, as fragments of attractions in sports and leisure centers, on playgrounds. Often, these surfaces are the only possible technical solution, for example in the form of springs for various purposes. It offers new forms of cyclic surfaces for introducing them to the practice of designing of thin shells and a pipeline connecting parts
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):111-119
pages 111-119 views

FACTORS INFLUENCING THE ARCHITECTURE OF RECREATIONAL AND MEDICAL COMPLEXES ANGOLA

Shuvalov V., Bindanda А.

摘要

The article reveals the main factors affecting the architectural and planning decisions in the design and construction of recreational and medical facilities. Formulated research objectives in order to identify architectural solutions in the construction of new recreation facilities and health in Angola. The most rational location for the construction of recreational and medical facilities Angola
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):120-130
pages 120-130 views

ON THE SUBJECT OF A CHOICE OF EFFECTIVE TECHNOLOGICAL DECISIONS OF LIQUIDATION OF OUT OF WORK INDUSTRIAL BUILDINGS AND STRUCTURES

Chernoivan V., Chernoivan A.

摘要

The article describes the production technology of works of liquidation of out of work industrial buildings by method of element-by-element dismantling and mechanical collapse of the facility. Recommendations on the choice of an effective technological decisions of liquidation of out of work industrial buildings and structures
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):131-142
pages 131-142 views

ROLE OF SMALL BUSINESS IN ENGINEERING AND ECONOMICAL ECONOMIC ACTIVITY OF MONGOLIA

Bogoslovskya A., Anarmaa A.

摘要

The article describes the increasing role of small businesses in Mongolia. The authors present classification criteria of national enterprises of small and medium-sized businesses and show their dynamics
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):143-149
pages 143-149 views

STATE PENSION FUND «PROMAGROFOND» AND ITS PLACE IN PENSION RUSSIA

Bogoslovskya A., Arefyeva Y.

摘要

The article discusses the work of private pension funds “PROMAGROFOND”. Shown his place in the pension system in Russia. Particular attention is paid to the placement of the fund’s assets in the various organizations of the Russian Federation . Describes the motivation of employees fund
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):150-156
pages 150-156 views

METHODOLOGICAL ASPECTS OF THE «DESCRIPTIVE GEOMETRY» SUBJECT TEACHING

Aygunyan M.

摘要

This work presents new methods of the «Descriptive geometry» course, based on geometrical image and comprehensive drawing imitating videos
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):157-160
pages 157-160 views

NAShI AVTORY

- -.
Bulletin of Peoples' Friendship University of Russia. Series Engineering researches. 2015;(3):161-165
pages 161-165 views

Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».