Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process
- Authors: Matveev V.N.1, Goriachkin E.S.1, Popov G.M.1, Baturin O.V.1, Kudryashov I.A.1
-
Affiliations:
- Samara National Research University
- Issue: Vol 22, No 3 (2023)
- Pages: 75-88
- Section: AIRCRAFT AND SPACE ROCKET ENGINEERING
- URL: https://journal-vniispk.ru/2542-0453/article/view/145856
- DOI: https://doi.org/10.18287/2541-7533-2023-22-3-75-88
- ID: 145856
Cite item
Full Text
Abstract
The features of the stages of parameter design calculation for the formation of the initial design of the flow path of the compressor spool of a twin-shaft engine core of a gas turbine engine are presented and substantiated. The article contains recommendations for choosing values of the pump head coefficient, efficiency and other important parameters for the stages of medium-pressure and high-pressure spools at the stage of thermodynamic calculation. At the stage of design gas-dynamic calculation of the compressor at the middle diameter, typical distributions of axial velocity component and degree of reaction along the flow path of compressor spools should be taken into consideration. At the same time, it is necessary to provide requirements for reducing the flow velocity and static pressure coefficients in the rotor wheels and stator blades, head coefficients and Stepanov coefficients. The design gas-dynamic calculation of the compressor along the radius of the flow path is characterized by a variety of flow swirl laws at the inlet to the rotor wheels, distributions of the pressure increase and efficiency over the height of the blades. In conclusion, an example of a three-dimensional model of a compressor flow path taking into consideration the features of design calculation of the parameters of compressor spools of a twin-shaft engine core of a gas turbine engine on the basis of the appropriate flow path diagram in the meridional plane is presented.
About the authors
V. N. Matveev
Samara National Research University
Author for correspondence.
Email: valeriym2008@rambler.ru
ORCID iD: 0000-0001-8111-0612
Doctor of Science (Engineering), Professor, Professor of the Department of Aircraft Engine Theory
Russian FederationE. S. Goriachkin
Samara National Research University
Email: goriachkin.e.s@gmail.com
ORCID iD: 0000-0002-3877-9764
Candidate of Science (Engineering), Associate Professor of the Department of Aircraft Engine Theory
Russian FederationG. M. Popov
Samara National Research University
Email: popov@ssau.com
ORCID iD: 0000-0003-4491-1845
Candidate of Science (Engineering), Associate Professor of the Department of Aircraft Engine Theory
Russian FederationO. V. Baturin
Samara National Research University
Email: oleg.v.baturin@gmail.com
Candidate of Science (Engineering), Associate Professor of the Department of Aircraft Engine Theory
Russian FederationI. A. Kudryashov
Samara National Research University
Email: ivan.kudryash1337@gmail.com
Postgraduate Student of the Department of Aircraft Engine Theory
Russian FederationReferences
- Kholshchevnikov K.V. Teoriya i raschet aviatsionnykh lopatochnykh mashin [Theory and calculation of aircraft impeller machines]. Moscow: Mashinostroenie Publ., 1970. 609 p.
- Belousov A.N., Musatkin N.F., Rad'ko V.M., Kuz'michev V.S. Proektnyy termogazodinamicheskiy raschet osnovnykh parametrov aviatsionnykh lopatochnykh mashin [Design thermogasodynamic calculation of the main parameters of aviation impeller machines]. Samara: Samara State Aerospace University Publ., 2006. 316 p.
- Hirsch C. Numerical computation of internal and external flows. Elsevier, 2007. 700 p.
- Bykov N.N., Emin O.N., Kovner D.S., Levin A.A. Vybor parametrov i opredelenie osnovnykh razmerov kompressorov i turbin gazogeneratorov GTD [Choice of parameters and determination of the main dimensions of compressors and gas turbines of GTE gas generators]. Moscow: MAI Publ., 1984. 69 p.
- Gel'medov F.Sh., Mileshin V.I., Sachkova N.G., Sal'nikov V.S., Talyzina V.S. A method for designing an axial compressor. Thermal Engineering. 2002. V. 49, Iss. 9. P. 719-729.
- Belousov A.N., Musatkin N.F., Rad'ko V.M. Teoriya i raschet aviatsionnykh lopatochnykh mashin [Theory and calculation of aircraft impeller machines]. Samara: FGUP «Izd-vo «Samarskiy Dom Pechati» Publ., 2003. 336 с.
- Matveev V.N., Kudryashov I.A., Popov G.M., Goryachkin E.S., Zubanov V.M., Melnikov S.A. Algorithm to shape appearance of the flow part of impeller machines of a twin-shaft gas generator of an aircraft GTE. Vestnik of P.A. Solovyov Rybinsk State Aviation Technical University. 2022. No. 2 (61). P. 25-32. (In Russ.)
- Stepanov G.Yu. Osnovy teorii lopatochnykh mashin, kombinirovannykh i gazoturbinnykh dvigateley: ucheb. posobie [Fundamentals of impeller machines theory, combined and gas turbine engines]. Moscow: Mashgiz Publ., 1958. 350 p.
- Dorofeev V.M., Maslov V.G., Pervyshin N.V., Svatenko S.A., Fishbeyn B.D. Termogazodinamicheskiy raschet gazoturbinnykh silovykh ustanovok [Thermogasdynamic calculation of gas-turbine power plants]. Moscow: Mashinostroenie Publ., 1973. 144 p.
- Koch C.C. Stalling pressure rise capability of axial flow compressor stages. Journal of Engineering for Power. 1981. V. 103, Iss. 4. P. 645-656. doi: 10.1115/1.3230787
- Kumpsty N.A. Compressor aerodynamics. UK, England: Longman Scientific & Technical, 1989. 509 p.
Supplementary files
