Investigation of the edge effect in composites using the ANSYS software in a two-dimensional formulation
- Autores: Skvortsov Y.V.1, Evtushenko M.A.1
-
Afiliações:
- Samara National Research University
- Edição: Volume 22, Nº 4 (2023)
- Páginas: 125-134
- Seção: MECHANICAL ENGINEERING
- URL: https://journal-vniispk.ru/2542-0453/article/view/311439
- DOI: https://doi.org/10.18287/2541-7533-2023-22-4-125-134
- ID: 311439
Citar
Texto integral
Resumo
The possibility of using the universal software ANSYS to study the concentration of interlaminar stresses near the free edges of laminated composites in a two-dimensional finite element formulation is considered. In this case, the cross-section of a rectangular four-layer composite plate of finite width with free side edges subject to uniform axial deformation is simulated. To create it, an original technique is proposed which consists in using thermal stress. The presented calculation results are in good agreement with the results of other authors.
Sobre autores
Yu. Skvortsov
Samara National Research University
Autor responsável pela correspondência
Email: yu.v.skvortsov@gmail.com
Candidate of Science (Engineering); Associate Professor of the Department of Space Engineering
RússiaM. Evtushenko
Samara National Research University
Email: m.evtushenko.a@yandex.ru
Graduate Student
RússiaBibliografia
- Shivakumar K., Abali F., Pora A. Modified short beam shear test for measuring inter-laminar shear strength of composites. AIAA Journal. 2002. V. 40, Iss. 11. P. 2368-2370. doi: 10.2514/2.1579
- Pipes R.B., Pagano N.J. Interlaminar stresses in composite laminates under uniform axial extension. Journal of Composite Materials. 1970. V. 4, Iss. 4. P. 538-548. doi: 10.1177/002199837000400409
- D’Ottavio M., Vidal P., Valot E., Polit O. Assessment of plate theories for free-edge effects. Composites: Part B, Engineering. 2013. V. 48. P. 111-121. doi: 10.1016/j.compositesb.2012.12.007
- Alfutov N.A., Zinov'ev P.A., Popov B.G. Raschet mnogosloynykh plastin i obolochek iz kompozitsionnykh materialov [Calculation of multilayer plates and shells made of composite materials]. Moscow: Mashinostroenie Publ., 1984. 263 p.
- Gaudenzi P., Mannini A., Carbonaro R. Multi-layer higher-order finite elements for the analysis of free-edge stresses in composite laminates. International Journal for Numerical Methods in Engineering. 1998. V. 41, Iss. 5. P. 851-873. doi: 10.1002/(sici)1097-0207(19980315)41:5<851::aid-nme312>3.0.co;2-q
- Wang A.S.D., Crossman F.W. Some new results on edge effect in symmetric compo-site laminates. Journal of Composite Materials. 1977. V. 11, Iss. 1. P. 92-106. doi: 10.1177/002199837701100110
Arquivos suplementares
