Determining the Geometric Parameters of a Sheared Layer in Drilling of Nonferrous Metals and Alloys with the Use of Axial Vibrations

S. G. Emel’yanov; V. V. Sidorova; V. V. Ponomarev; M. S. Razumov

doi:10.1007/s10556-017-0273-2

Determining the Geometric Parameters of a Sheared Layer in Drilling of Nonferrous Metals and Alloys with the Use of Axial Vibrations

Authors: Emel’yanov S.G.¹, Sidorova V.V.¹, Ponomarev V.V.¹, Razumov M.S.¹
Affiliations:
1. Southwest State University
Issue: Vol 52, No 11-12 (2017)
Pages: 796-800
Section: Article
URL: https://journal-vniispk.ru/0009-2355/article/view/235214
DOI: https://doi.org/10.1007/s10556-017-0273-2
ID: 235214

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The problem of determining the kinematic parameters of a vibrodrilling device and the geometric elements of a sheared layer produced in the course of treating nonferrous metals and alloys by drilling with the use of axial vibrations is considered. Relationships between the dimensions of an element of a chip and the frequency of the axial vibrations are found.