Dialkyl Disulfide Solvents of Asphalt-Resin-Wax Deposits


Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription Access

Abstract

The structural group composition of samples of asphalt-resin-wax deposits (ARWD) has been studied. These samples were found to be of the wax-rich type. The effectiveness of disulfide oil as an ARWD solvent was studied. Pure disulfide oil was found ineffective for removing the most difficult to degrade wax-rich deposits. The addition of 0.1-0.5 wt. % nonionogenic surfactants and more than 40 wt.% aromatic hydrocarbons (liquid pyrolysis products, Bentol) markedly enhances the effectiveness of disulfide oil (up to 80-90 wt. % at 20-50°C), which justifies its commercial use as an ARWD solvent.

About the authors

O. M. Kornetova

Volga Research Institute of Hydrocarbon feed (OJS VNIIUS)

Author for correspondence.
Email: vnilus.4lab@mail.ru
Russian Federation, Privolzhsk

A. V. Sharifullin

Kazan’ National Research Technological University

Email: vnilus.4lab@mail.ru
Russian Federation, Kazan’

F. A. Korobkov

Volga Research Institute of Hydrocarbon feed (OJS VNIIUS)

Email: vnilus.4lab@mail.ru
Russian Federation, Privolzhsk

A. F. Vil’danov

Volga Research Institute of Hydrocarbon feed (OJS VNIIUS)

Email: vnilus.4lab@mail.ru
Russian Federation, Privolzhsk

L. R. Baibekova

Kazan’ National Research Technological University

Email: vnilus.4lab@mail.ru
Russian Federation, Kazan’

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2016 Springer Science+Business Media New York