Multiplate quick-freezing machines
- Authors: Akhmetzyanov M.T.1
-
Affiliations:
- FABS Engineering OOO
- Issue: Vol 92, No 2 (2003)
- Pages: 20-22
- Section: Articles
- URL: https://journal-vniispk.ru/0023-124X/article/view/106179
- DOI: https://doi.org/10.17816/RF106179
- ID: 106179
Cite item
Full Text
Abstract
Plate freezers are complex and expensive equipment, the purchase of which is a long-term investment. Its correct choice (performance, reliability, ease of operation, maintainability) determines the return on investment. To facilitate the consumer the difficult task of choosing the plate fast freezing equipment, we give a description of the principles of its operation and different options of technical design.
Full Text
##article.viewOnOriginalSite##About the authors
M. T. Akhmetzyanov
FABS Engineering OOO
Author for correspondence.
Email: info@eco-vector.com
Russian Federation
References
Supplementary files
Supplementary Files
Action
1.
JATS XML
2.
Fig. 1. Schematic diagram of the tile apparatus
Download (684KB)
3.
Fig. 2. Temperature distribution t along the length of the plate l
Download (906KB)
4.
Fig. 3. Schematic diagram of the installation with the injector: 1 - compressor; 2 - condenser; 3 - line receiver (high pressure side); 4 - injector; 5 - plate evaporator; 6 - circulation receiver (low pressure side)
Download (586KB)
5.
Fig. 4. Schematic diagram of installation with circulation pump: 1 - compressor; 2 - condenser; 3 - line receiver (high pressure side); 4 - throttling valve; 5 - pump; 6 - tile evaporator 7 - circulation receiver (low pressure side)
Download (634KB)
6.
Fig. 5. Plate fast freezer with integrated refrigeration compressor unit
Download (1MB)
7.
Fig. 6. Compressor unit with tile evaporator group: 1 - compressor unit with circulation receiver and circulation pumps: 2 - refrigerant supply and return manifolds; 3 - tile evaporator; 4 - air condenser
Download (1MB)
