Effect of Iron and Magnesium on Alloy AL9M Structure and Properties
- Authors: Bazhenov V.E.1, Koltygin A.V.1, Belov V.D.1
-
Affiliations:
- National Research Technological University “MISiS”
- Issue: Vol 59, No 5-6 (2017)
- Pages: 346-351
- Section: Aluminum Alloys
- URL: https://journal-vniispk.ru/0026-0673/article/view/235752
- DOI: https://doi.org/10.1007/s11041-017-0154-5
- ID: 235752
Cite item
Abstract
The effect of iron impurity on the structure and properties of aluminum alloy AL9M, especially its action on magnesium distribution within the structure, is studied. The microstructure of a cast component of this alloy broken during operation is analyzed. It is shown that iron impurity has an unfavorable effect on structure and mechanical properties of a casting due to appearance of Al9Fe2Si and Al18Fe2Mg7Si10 intermetallics. Formation of these intermetallics consumes a considerable amount of magnesium and lowers the content of the Q(Al5Cu2Mg8Si6) strengthening phase in the alloy structure.
About the authors
V. E. Bazhenov
National Research Technological University “MISiS”
Author for correspondence.
Email: misistip@mail.ru
Russian Federation, Moscow
A. V. Koltygin
National Research Technological University “MISiS”
Email: misistip@mail.ru
Russian Federation, Moscow
V. D. Belov
National Research Technological University “MISiS”
Email: misistip@mail.ru
Russian Federation, Moscow
Supplementary files
