Effect of Preliminary Quenching on the Efficiency of Hardening Heat Treatment of Cold-Deformed β-Titanium Alloy TS6
- Authors: Shaboldo O.P.1, Mazurov S.A.1, Skotnikova M.A.2, Shamshurin A.I.2, Kononov A.A.1
-
Affiliations:
- Central Research Institute of Materials (TsNIIM)
- St. Petersburg State, Polytechnic University
- Issue: Vol 59, No 5-6 (2017)
- Pages: 370-376
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235770
- DOI: https://doi.org/10.1007/s11041-017-0158-1
- ID: 235770
Cite item
Abstract
Methods of mechanical testing, metallographic analysis, x-ray diffraction, and back-scattered electron diffraction analysis are used to study β-titanium alloy TS6 wire cold deformed with ε = 45%. It is shown that after ageing alloy with a polygonized structure (quenched from 700°C) has better strength properties than with partial recrystallization (quenching from 800°C).
About the authors
O. P. Shaboldo
Central Research Institute of Materials (TsNIIM)
Email: petroprom2013@yandex.ru
Russian Federation, St. Petersburg
S. A. Mazurov
Central Research Institute of Materials (TsNIIM)
Email: petroprom2013@yandex.ru
Russian Federation, St. Petersburg
M. A. Skotnikova
St. Petersburg State, Polytechnic University
Email: petroprom2013@yandex.ru
Russian Federation, St. Petersburg
A. I. Shamshurin
St. Petersburg State, Polytechnic University
Email: petroprom2013@yandex.ru
Russian Federation, St. Petersburg
A. A. Kononov
Central Research Institute of Materials (TsNIIM)
Email: petroprom2013@yandex.ru
Russian Federation, St. Petersburg
Supplementary files
