Email this article Use of Industrial Monitoring Results for Predicting Mechanical Properties of Titanium Alloy Semiproducts
- Authors: Egorova Y.B.1, Uvarov V.N.1, Davydenko L.V.2, Davydenko R.A.1
-
Affiliations:
- Stupino Branch of Moscow Aviation Institute (National Research University)
- Moscow Polytechnic University
- Issue: Vol 59, No 5-6 (2017)
- Pages: 377-383
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235779
- DOI: https://doi.org/10.1007/s11041-017-0159-0
- ID: 235779
Cite item
Open Access
Access granted
Subscription Access
Abstract
Ingot chemical composition and the mechanical properties of semiproducts produced at various Russian enterprises from 1971 to 2011 are analyzed. The fundamental possibility is demonstrated for predicting probable values of mechanical properties of wrought titanium alloy semiproducts using industrial monitoring data with errors determined by the contemporary level of industrial production.
About the authors
Yu. B. Egorova
Stupino Branch of Moscow Aviation Institute (National Research University)
Author for correspondence.
Email: egorova_mati@mail.ru
Russian Federation, Stupino
V. N. Uvarov
Stupino Branch of Moscow Aviation Institute (National Research University)
Email: egorova_mati@mail.ru
Russian Federation, Stupino
L. V. Davydenko
Moscow Polytechnic University
Email: egorova_mati@mail.ru
Russian Federation, Moscow
R. A. Davydenko
Stupino Branch of Moscow Aviation Institute (National Research University)
Email: egorova_mati@mail.ru
Russian Federation, Stupino
Supplementary files
