Email this article Effect of Aging on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31
- Authors: Kerenciler H.1, Gündüz S.2, Erden M.A.2, Türkmen M.3, Karabulut H.4
-
Affiliations:
- Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
- Karabük University, Technology Faculty, Department of Manufacturing Engineering
- Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
- Karabük University, Vocational School, Department of Occupational Health and Safety
- Issue: Vol 58, No 3-4 (2016)
- Pages: 179-184
- Section: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235449
- DOI: https://doi.org/10.1007/s11041-016-9985-8
- ID: 235449
Cite item
Open Access
Access granted
Subscription Access
Abstract
The structure and mechanical properties of magnesium alloy AZ31 are studied after conventional and deformation aging under conditions corresponding to the thermal cycle of polymerization in paint coating of cars. The aging is conducted after 3-h solution treatment at 400°C, water quenching, and aging at 180°C for from 10 min to 6 h. Some of the specimens are deformed by 0.5% right after the solution treatment and then aged by the same regime.
About the authors
H. Kerenciler
Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
Author for correspondence.
Email: kerencihuseyin@gmail.com
Turkey, Karabük
S. Gündüz
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Turkey, Karabük
M. Akif Erden
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Turkey, Karabük
M. Türkmen
Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
Email: kerencihuseyin@gmail.com
Turkey, Kocaeli-Gebze
H. Karabulut
Karabük University, Vocational School, Department of Occupational Health and Safety
Email: kerencihuseyin@gmail.com
Turkey, Karabük
Supplementary files
