Effect of Aging on the Microstructure and Mechanical Properties of Magnesium Alloy AZ31
- Авторы: Kerenciler H.1, Gündüz S.2, Erden M.A.2, Türkmen M.3, Karabulut H.4
-
Учреждения:
- Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
- Karabük University, Technology Faculty, Department of Manufacturing Engineering
- Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
- Karabük University, Vocational School, Department of Occupational Health and Safety
- Выпуск: Том 58, № 3-4 (2016)
- Страницы: 179-184
- Раздел: Article
- URL: https://journal-vniispk.ru/0026-0673/article/view/235449
- DOI: https://doi.org/10.1007/s11041-016-9985-8
- ID: 235449
Цитировать
Аннотация
The structure and mechanical properties of magnesium alloy AZ31 are studied after conventional and deformation aging under conditions corresponding to the thermal cycle of polymerization in paint coating of cars. The aging is conducted after 3-h solution treatment at 400°C, water quenching, and aging at 180°C for from 10 min to 6 h. Some of the specimens are deformed by 0.5% right after the solution treatment and then aged by the same regime.
Об авторах
H. Kerenciler
Karabük University, Institute of Science and Technology, Department of Manufacturing Engineering
Автор, ответственный за переписку.
Email: kerencihuseyin@gmail.com
Турция, Karabük
S. Gündüz
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Турция, Karabük
M. Erden
Karabük University, Technology Faculty, Department of Manufacturing Engineering
Email: kerencihuseyin@gmail.com
Турция, Karabük
M. Türkmen
Kocaeli Iniversity, Hereke Vocational School, Department of Metallurgy
Email: kerencihuseyin@gmail.com
Турция, Kocaeli-Gebze
H. Karabulut
Karabük University, Vocational School, Department of Occupational Health and Safety
Email: kerencihuseyin@gmail.com
Турция, Karabük
Дополнительные файлы
