Modification of the Surface of Products by Plastic Deformation and Deposition of Functional Coatings *

L. S. Belevskii; I. V. Belevskaya; V. K. Belov; E. V. Gubarev; Yu. Yu. Efimova

doi:10.1007/s11015-016-0327-2

Modification of the Surface of Products by Plastic Deformation and Deposition of Functional Coatings^*

Authors: Belevskii L.S.¹, Belevskaya I.V.¹, Belov V.K.¹, Gubarev E.V.¹, Efimova Y.Y.¹
Affiliations:
1. Magnitogorsk State Technical University
Issue: Vol 60, No 5-6 (2016)
Pages: 533-537
Section: Article
URL: https://journal-vniispk.ru/0026-0894/article/view/238712
DOI: https://doi.org/10.1007/s11015-016-0327-2
ID: 238712

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

The possibility of using a rotary-disk sectional wire brush has been investigated for the nanostructuring of metal products’ surface layer and the subsequent application of functional coatings. It was established that a nanostructured surface layer with fragment dimensions up to 0.13 μm can be obtained by a percussive-frictional method that is similar to high-rate plastic deformation. The microtopography of specimen surfaces was studied under different processing modes.