Email this article Methodology for the numerical solution of problems in relation to the coil-type electric heat exchangers for heating fuel
- Authors: Krokhta G.M.1, Khomchenko Y.N.1, Usatykh N.A.1
-
Affiliations:
- Novosibirsk State Agrarian University
- Issue: Vol 88, No 4 (2021)
- Pages: 45-54
- Section: Articles
- URL: https://journal-vniispk.ru/0321-4443/article/view/87326
- DOI: https://doi.org/10.31992/0321-4443-2021-4-45-54
- ID: 87326
Cite item
Full Text
Abstract
The specificity of the operating conditions of agricultural tractors in the agro-industrial complex requires the provision of reliable engine start at low ambient temperatures. Improving the starting qualities of a diesel engine and reducing incomplete combustion in the post-start period can be achieved by increasing the exergy of the air charge at the end of the compression stroke or increasing the exergy of the fuel injected into the combustion chamber. The purpose of the study is to reduce the expenditure of exergy for prestarting a diesel engine, improve starting qualities and reduce incomplete combustion in the post-start period.
To achieve this goal, the design of an electric heat exchanger was developed in the form of a coil from a high-pressure fuel line, into which a heating element is inserted. A method for calculating its main parameters was developed. Calculations showed that in order to ensure reliable start-up of a diesel engine in winter, it is necessary to heat the fuel in the nozzle to a temperature of 240 °C in the thermal boost mode. A heater of about 98 Watts is required to reach this temperature within 270 seconds of priming. However, in order to maintain such a fuel temperature during the start-up process, it is necessary to make changes in the nozzle design in order to minimize heat losses into the walls of the fuel channel by applying a heat-insulating coating. With further engine operation in the post-start heating mode, the fuel temperature in the injector is reduced to 85–95 °C.
Full Text
##article.viewOnOriginalSite##About the authors
G. M. Krokhta
Novosibirsk State Agrarian University
Author for correspondence.
Email: mshipo@mail.ru
Dsc in Engineering
Russian Federation, NovosibirskYE. N. Khomchenko
Novosibirsk State Agrarian University
Email: mshipo@mail.ru
PhD in Engineering
Russian Federation, NovosibirskN. A. Usatykh
Novosibirsk State Agrarian University
Email: mshipo@mail.ru
Russian Federation, Novosibirsk
References
- Heywood J.B. Internal combustion engine fundamentals [Tekst] / John B. Heywood. McGrow-Hill. 2019. 1056 p.
- Balabin V.I., Vasil’yev V.N. Features of the use of thermal boosting of fuel on locomotive diesel engines. Sovremenn·yye naukoyemkiye tekhnologii. 2015. No 4, pp. 107−113 (in Russ.).
- Krokhta G.M. Cold start of the 6ChN 13,0/11,5 engine and post-start warming up of the engine-transmission unit of the T-150K tractor. Traktory i sel’khozmashiny. 2016. No 1, pp. 31–35 (in Russ.).
- Krokhta G.M. Quality control of the mixture formation process during start-up and post-start heating of a diesel engine. Traktory i sel’khozmashiny. 2019. No 4, pp. 3−12 (in Russ.).
- Celik A., Yilmaz M., Yildiz O.F. Improvement of diesel engine startability under low temperatures by vortex tubes // Energy reports. 2020. № 6. С. 17−27.
- Ramadhas A.S., Xu H. Intake air heating strategy to reduce cold-start emissions from diesel engines // Biofuels. 2018. Vol 9. Iss 3. С. 405−414.
- Mekonen M.W., Sahoo N. Effect of fuel preheating with blended fuels and exhaust gas recirculation on diesel engine operating parameters // Renewable Energy Focus. 2018. Vol 26. С. 58−70.
- Krokhta G.M. The exergy method and criteria for assessing the readiness of a diesel engine for start-up. Vestnik NGAU. 2012. No 1 (22). Chast’ 2, pp. 132−135 (in Russ.).
- Yudayev B.N. Teploperedacha [Heat transfer]: Uchebnik dlya vuzov. 2-e izd., pererab. i dop. Moscow: Vyssh. Shkola Publ., 1981. 310 p.
- Krokhta G.M., Vagaytsev P.S., Usatykh N.A., Khomchenko YE.N. Ustroystvo dlya podogreva topliva v sisteme vysokogo davleniya dizel’nogo dvigatelya v predpuskovoy i puskovoy periody [Device for heating fuel in the high pressure system of a diesel engine during pre-start and start-up periods]: patent No 2731505 (RF). 2020.
- Krokhta G.M. Osobennosti ekspluatatsii traktorov v usloviyakh nizkikh temperature [Operation of tractors at low temperatures]: monografiya. Novosib. gos. agrar. un-t, Inzhener. In-t. Novosibirsk: ITS NGAU «Zolotoy koloS» Publ., 2017. 376 p.
Supplementary files
