Static and dynamic influence of forces on a being threshed corncob

封面

如何引用文章

全文:

详细

BACKGROUND: With the use of high-speed shooting, it was found that the corncob, getting into the gap of the threshing unit, generally, takes a position parallel to the drum axis. Let us accept that the plane of operation of the working body of the threshing drum – the beater – coincides with the generatrix of a cob. The cob changes the motion mode because of the impact of the threshing machine beater on the cob. The impact can take place in the moment when the cob even does not hit the deck cleats, so the cob gets a flying kick.

AIM: Deriving the static and dynamic influence of forces on the being threshed corncob. Defining the necessary force of corn seeds breaking-off from the cob in dependence on the friction coefficient.

METHODS: The value of mechanical impact of working bodies of the orienting-metering loading device and the threshing-separating device on a corn seed is limited not only by strength properties of the protecting corn cover, but by the link strength between a seed and a cob in the nose, middle and root areas. Knowledge of this mechanical-technological property helps to increase the level of variability of force impact in corncobs from the side of working bodies of the used machinery. It helps to transport the corncobs without husk, to orient them in space, to supply in small increments for the proper processing and, in addition, to thresh without causing any macro- and microdamages to the seeds.

RESULTS: The seed moisture change and, consequently, the seed-to-seed friction coefficient change also influences on the ratio between the applied force P and the reacting force N. With the same load P applied to the dry and the moisty cobs, the pressure N on the dry seed is higher than on the moisty one, and seed threshing from the dry cobs is conducted with lower external forces P at free direct impact.

CONCLUSION: The process of the flying kick threshing becomes more difficult with the increase of corncobs moisture due to increase of seed-to-seed friction. The flying kick threshing of corncobs stops at the seed moisture which corresponds to the friction coefficient f = 0.22. The obtained theoretical principles are confirmed experimentally.

作者简介

Vladimir Poghosyan

Kuban State Agrarian University named after I.T. Trubilin

Email: pogosyn@gmail.com
ORCID iD: 0000-0001-6248-4029
SPIN 代码: 3963-1182

Associate Professor of the Tractors, Automobiles and Technical Mechanics Department

俄罗斯联邦, Krasnodar

Alexander Poluektov

Kuban State Agrarian University named after I.T. Trubilin

编辑信件的主要联系方式.
Email: aleksandr.poluektov2000@yandex.ru
ORCID iD: 0000-0001-9082-7199
SPIN 代码: 5742-2553

Assistant at the Tractors, Automobiles and Technical Mechanics Department

俄罗斯联邦, Krasnodar

参考

  1. Bakharev DN. Sovershenstvovanie tekhnologii posleuborochnoy obrabotki pochatkov semennoy kukuruzy na osnove tekhnicheskikh resheniy poetapnogo obmolota [dissertation] Michurinsk; 2022. (In Russ). EDN: AJYLGC
  2. Kapustin AS, Kapustin SI, Aziz B, et al. Sortovaya tekhnologiya kukuruzy. Lugansk: Luganskiy natsionalnyy agrarnyy universitet; 2013. (In Russ).
  3. Pastukhov AG, Bakharev DN. Molotilno-separiruyushchee ustroystvo dlya pervichnogo semenovodstva kukuruzy. Selskokhozyaystvennye mashiny i tekhnologii. 2020;14(1):34–39. (In Russ). doi: 10.22314/2073-7599-2020-14-1-34-39
  4. Kurasov VS. Mekhaniko-tekhnologicheskoe obosnovanie kompleksa tekhnicheskikh sredstv dlya selektsii, sortoispytaniya i pervichnogo semenovodstva kukuruzy [dissertation] Krasnodar; 2003. (In Russ).
  5. Pogosyan VM. Selektsionnaya kukuruznaya molotilka. Traktory i selkhozmashiny. 2019. № 5. S. 16–20. (In Russ). doi: 10.31992/0321-4443-2019-5-16-20 EDN: NPLLVC
  6. Pogosyan V.M. Parametry kukuruznoy selektsionnoy valtsovoy molotilki [dissertation] Krasnodar; 2019. (In Russ).
  7. Pogosyan V.M., Mechkalo A.L., Poluektov A.A. K voprosu zavisimosti prochnosti zerna kukuruzy ot ego vlazhnosti. Tractors and Agricultural Machinery. 2023;90(1):59–66. (In Russ). doi: 10.17816/0321-4443-111809

补充文件

附件文件
动作
1. JATS XML
2. Fig. 1. The load diagram of arising reaction forces at interaction of the force P with the corn seed in a cob.

下载 (93KB)
3. Fig. 2. The load diagram of reactive forces N and F and their magnitude R at the adjacent corn seed in a cob.

下载 (93KB)
4. Fig. 3. The load diagram of the magnitude R of the forces N and F at the adjacent corn seed in a cob.

下载 (87KB)
5. Fig. 4. Dependence of the ratio of the force P and the braking load T of a seed link on the friction coefficient f.

下载 (96KB)
6. Fig. 5. Dependence of the reacting force N on the applied load P related to the seed moisture change (i.e. friction coefficient f change).

下载 (144KB)

版权所有 © Eco-Vector, 2024

Creative Commons License
此作品已接受知识共享署名-非商业性使用-禁止演绎 4.0国际许可协议的许可。
 


Согласие на обработку персональных данных с помощью сервиса «Яндекс.Метрика»

1. Я (далее – «Пользователь» или «Субъект персональных данных»), осуществляя использование сайта https://journals.rcsi.science/ (далее – «Сайт»), подтверждая свою полную дееспособность даю согласие на обработку персональных данных с использованием средств автоматизации Оператору - федеральному государственному бюджетному учреждению «Российский центр научной информации» (РЦНИ), далее – «Оператор», расположенному по адресу: 119991, г. Москва, Ленинский просп., д.32А, со следующими условиями.

2. Категории обрабатываемых данных: файлы «cookies» (куки-файлы). Файлы «cookie» – это небольшой текстовый файл, который веб-сервер может хранить в браузере Пользователя. Данные файлы веб-сервер загружает на устройство Пользователя при посещении им Сайта. При каждом следующем посещении Пользователем Сайта «cookie» файлы отправляются на Сайт Оператора. Данные файлы позволяют Сайту распознавать устройство Пользователя. Содержимое такого файла может как относиться, так и не относиться к персональным данным, в зависимости от того, содержит ли такой файл персональные данные или содержит обезличенные технические данные.

3. Цель обработки персональных данных: анализ пользовательской активности с помощью сервиса «Яндекс.Метрика».

4. Категории субъектов персональных данных: все Пользователи Сайта, которые дали согласие на обработку файлов «cookie».

5. Способы обработки: сбор, запись, систематизация, накопление, хранение, уточнение (обновление, изменение), извлечение, использование, передача (доступ, предоставление), блокирование, удаление, уничтожение персональных данных.

6. Срок обработки и хранения: до получения от Субъекта персональных данных требования о прекращении обработки/отзыва согласия.

7. Способ отзыва: заявление об отзыве в письменном виде путём его направления на адрес электронной почты Оператора: info@rcsi.science или путем письменного обращения по юридическому адресу: 119991, г. Москва, Ленинский просп., д.32А

8. Субъект персональных данных вправе запретить своему оборудованию прием этих данных или ограничить прием этих данных. При отказе от получения таких данных или при ограничении приема данных некоторые функции Сайта могут работать некорректно. Субъект персональных данных обязуется сам настроить свое оборудование таким способом, чтобы оно обеспечивало адекватный его желаниям режим работы и уровень защиты данных файлов «cookie», Оператор не предоставляет технологических и правовых консультаций на темы подобного характера.

9. Порядок уничтожения персональных данных при достижении цели их обработки или при наступлении иных законных оснований определяется Оператором в соответствии с законодательством Российской Федерации.

10. Я согласен/согласна квалифицировать в качестве своей простой электронной подписи под настоящим Согласием и под Политикой обработки персональных данных выполнение мною следующего действия на сайте: https://journals.rcsi.science/ нажатие мною на интерфейсе с текстом: «Сайт использует сервис «Яндекс.Метрика» (который использует файлы «cookie») на элемент с текстом «Принять и продолжить».