Email this article Investigation of the Properties of SiC–ZrB2-Based Ceramic Composite Materials Obtained by Spark Plasma Sintering
- Authors: Shchegoleva N.E.1, Evdokimov S.A.1, Modin S.Y.1, Karachevtsev F.N.1
-
Affiliations:
- All-Russia Scientific-Research Institute of Aviation Materials, Federal State Unitary Enterprise (FGUP “VIAM”)
- Issue: Vol 75, No 7-8 (2018)
- Pages: 253-257
- Section: Science for Ceramic Production
- URL: https://journal-vniispk.ru/0361-7610/article/view/244998
- DOI: https://doi.org/10.1007/s10717-018-0066-x
- ID: 244998
Cite item
Open Access
Access granted
Subscription Access
Abstract
Spark plasma sintering was used to obtain experimental samples of ceramic composite materials in the system SiC–ZrB2 with graphite and aluminum nitride as additives. The physical and mechanical properties of composites (density, strength in bending, hardness, cracking resistance) were studied as a function of the production temperature parameters. The microstructure of the materials was studied and x-ray spectral microanalysis was performed and the oxidation resistance of the obtained samples at 1500°C was determined.
About the authors
N. E. Shchegoleva
All-Russia Scientific-Research Institute of Aviation Materials, Federal State Unitary Enterprise (FGUP “VIAM”)
Author for correspondence.
Email: natalia.shchegoleva@yandex.ru
Russian Federation, Moscow
S. A. Evdokimov
All-Russia Scientific-Research Institute of Aviation Materials, Federal State Unitary Enterprise (FGUP “VIAM”)
Email: natalia.shchegoleva@yandex.ru
Russian Federation, Moscow
S. Yu. Modin
All-Russia Scientific-Research Institute of Aviation Materials, Federal State Unitary Enterprise (FGUP “VIAM”)
Email: natalia.shchegoleva@yandex.ru
Russian Federation, Moscow
F. N. Karachevtsev
All-Russia Scientific-Research Institute of Aviation Materials, Federal State Unitary Enterprise (FGUP “VIAM”)
Email: natalia.shchegoleva@yandex.ru
Russian Federation, Moscow
Supplementary files
