Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

N. N. Shcherbakova; V. K. Pereshivailov; Ya. V. Perevoznikova; V. V. Sleptsov

doi:10.1007/s10717-018-9988-6

Intermediate Process Control of the Fabrication of a Conducting Layer on the Surface of Nanofibrous Materials

Authors: Shcherbakova N.N.¹, Pereshivailov V.K.², Perevoznikova Y.V.², Sleptsov V.V.³
Affiliations:
1. N. G. Chernyshevsky Saratov State Research University
2. NESK, JSC
3. Moscow Aviation Institute (National Research University)
Issue: Vol 74, No 9-10 (2018)
Pages: 329-331
Section: At Enterprises and Institutes
URL: https://journal-vniispk.ru/0361-7610/article/view/245053
DOI: https://doi.org/10.1007/s10717-018-9988-6
ID: 245053

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

Coatings on glass witness samples, making it possible to set the process regimes for deposition, as well as the operational parameters of the setup — working current, voltage, limit and working vacuum as well as the required number of coating layers — were investigated. The measurement of the resistance of metallized coatings on nonwoven materials in definite regimes showed a value from 32 to 11 Ω/cm², as set by the experimental conditions.