Email this article Prospects for Using Different Types of Transparencies in the Manufacture of Aircraft Canopies (Review)
- Authors: Mekalina I.V.1, Yakovlev N.O.1, Kharitonov G.M.2, Khitrova O.I.2
-
Affiliations:
- All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
- M. M. Gromov Flight-Research Institute
- Issue: Vol 74, No 9-10 (2018)
- Pages: 367-371
- Section: At Enterprises and Institutes
- URL: https://journal-vniispk.ru/0361-7610/article/view/245070
- DOI: https://doi.org/10.1007/s10717-018-9996-6
- ID: 245070
Cite item
Open Access
Access granted
Subscription Access
Abstract
The prospects for using aircraft transparency parts based on silicate, organic, or polycarbonate glasses from the standpoint of strength, the primary sources of loading, and the most vulnerable locations are reviewed. Suggestions for increasing their strength reliability are described.
About the authors
I. V. Mekalina
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Author for correspondence.
Email: glass627@viam.ru
Russian Federation, Moscow
N. O. Yakovlev
All-Russia Scientific-Research Institute of Aviation Materials, State Scientific Center of the Russian Federation (VIAM)
Email: glass627@viam.ru
Russian Federation, Moscow
G. M. Kharitonov
M. M. Gromov Flight-Research Institute
Email: glass627@viam.ru
Russian Federation, Zhukovskii, Moscow Oblast
O. I. Khitrova
M. M. Gromov Flight-Research Institute
Email: glass627@viam.ru
Russian Federation, Zhukovskii, Moscow Oblast
Supplementary files
