Email this article Investigation of the Influence of Paraffin Production Wastes on the Properties of Ceramic Articles
- Authors: Pranckeviciene J.1, Pundiene I.1, Balkevicius V.R.1, Balciunas G.1
-
Affiliations:
- Institute of Building Materials, Faculty of Civil Engineering, Gediminas Vilnius Technical University (VGTU)
- Issue: Vol 76, No 3-4 (2019)
- Pages: 155-159
- Section: Wastes into Production
- URL: https://journal-vniispk.ru/0361-7610/article/view/245204
- DOI: https://doi.org/10.1007/s10717-019-00154-x
- ID: 245204
Cite item
Open Access
Access granted
Subscription Access
Abstract
The possibility of using paraffin production wastes (PPW; 2.5 – 10 wt.%) in the production of porous ceramic was investigated. The addition of 2.5% PPW increases the strength of the ceramic in compression. Increasing PPW to 10% significantly increases the apparent porosity of the ceramic.
About the authors
J. Pranckeviciene
Institute of Building Materials, Faculty of Civil Engineering, Gediminas Vilnius Technical University (VGTU)
Author for correspondence.
Email: jolanta.pranckeviciene@vgtu.lt
Lithuania, Vilnius
I. Pundiene
Institute of Building Materials, Faculty of Civil Engineering, Gediminas Vilnius Technical University (VGTU)
Email: jolanta.pranckeviciene@vgtu.lt
Lithuania, Vilnius
V. R. Balkevicius
Institute of Building Materials, Faculty of Civil Engineering, Gediminas Vilnius Technical University (VGTU)
Email: jolanta.pranckeviciene@vgtu.lt
Lithuania, Vilnius
G. Balciunas
Institute of Building Materials, Faculty of Civil Engineering, Gediminas Vilnius Technical University (VGTU)
Email: jolanta.pranckeviciene@vgtu.lt
Lithuania, Vilnius
Supplementary files
