New Milling-Machine Design

B. E. Pini; Yu. V. Maksimov; A. V. Popov

doi:10.3103/S1068798X1810012X

New Milling-Machine Design

Authors: Pini B.E.¹, Maksimov Y.V.¹, Popov A.V.¹
Affiliations:
1. Moscow Polytechnic University
Issue: Vol 38, No 10 (2018)
Pages: 790-793
Section: Article
URL: https://journal-vniispk.ru/1068-798X/article/view/227547
DOI: https://doi.org/10.3103/S1068798X1810012X
ID: 227547

Cite item

Full Text

Open Access
Restricted Access

Access granted
Restricted Access

Subscription Access

Abstract
About the authors
References
Supplementary files
Statistics

Abstract

For many years, the structure of milling and drilling machines has remained basically the same: the spindle chuck is attached in cantilever fashion to the vertical column. In the present work, a new configuration is considered.

Keywords

milling machines, cantilever structure, arch structure, displacement, rigidity, spindle chuck

About the authors

B. E. Pini

Moscow Polytechnic University

Author for correspondence.
Email: boris.pini@mail.ru
Russian Federation, Moscow

Yu. V. Maksimov

Moscow Polytechnic University

Author for correspondence.
Email: yu.v.maksimov@mospolytech.ru
Russian Federation, Moscow

A. V. Popov

Moscow Polytechnic University

Author for correspondence.
Email: apv1991@yandex.ru
Russian Federation, Moscow

Supplementary files

Supplementary Files

Action

1. JATS XML

Download

Username
Password
Remember me

Forgot password?	Register

Username
Password
Remember me

Forgot password?	Register