Email this article A Possibility of Reducing the Induced Voltage Within a Repair Area1
- Authors: Monakhov A.F.1, Degtyarenko E.A.1, Danilov D.B.1
-
Affiliations:
- National Research University “Moscow Power Engineering Institute”
- Issue: Vol 50, No 3 (2016)
- Pages: 329-331
- Section: Power Systems and Electric Networks
- URL: https://journal-vniispk.ru/1570-145X/article/view/245245
- DOI: https://doi.org/10.1007/s10749-016-0706-7
- ID: 245245
Cite item
Open Access
Access granted
Subscription Access
Abstract
The electromagnetic effect of a live high-voltage line on a disconnected line is analyzed. It is shown by calculation that the zero-potential point of the disabled conductor can be shifted to the repair area by changing the grounding resistance at the substations. To this end, adjustable resistors placed between the disabled conductor and the grounding devices at the substations can be used. The possibility of automating this process is examined.
About the authors
A. F. Monakhov
National Research University “Moscow Power Engineering Institute”
Author for correspondence.
Email: a-monakhov@yandex.ru
Russian Federation, Moscow
E. A. Degtyarenko
National Research University “Moscow Power Engineering Institute”
Email: a-monakhov@yandex.ru
Russian Federation, Moscow
D. B. Danilov
National Research University “Moscow Power Engineering Institute”
Email: a-monakhov@yandex.ru
Russian Federation, Moscow
Supplementary files
