Email this article Calculation of fatigue damage under cyclic complex loading considering the effect of the strain rate
- Authors: Margolin B.Z.1, Gulenko A.G.1
-
Affiliations:
- NRC “Kurchatov Institute” – CRISM “Prometey”
- Issue: No 2(114) (2023)
- Pages: 136-146
- Section: Structural-working strength and serviceability of materials
- URL: https://journal-vniispk.ru/1994-6716/article/view/305995
- DOI: https://doi.org/10.22349/1994-6716-2023-114-2-136-146
- ID: 305995
Cite item
Open Access
Access granted
Subscription Access
Abstract
A method has been proposed for calculating fatigue damage under cyclic loading, in which the loading in half-cycles is not simple, i.e., the stress components in a half-cycle do not change proportionally to one parameter. In addition, the proposed method takes into account the situation when the strain rate in a half-cycle affects the degree of damage to the material (for example, in the case of material deformation under conditions of creep or exposure to a corrosive environment) and this rate can change in different loading half-cycles.
Keywords
About the authors
B. Z. Margolin
NRC “Kurchatov Institute” – CRISM “Prometey”
Author for correspondence.
Email: mail@crism.ru
Dr Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
A. G. Gulenko
NRC “Kurchatov Institute” – CRISM “Prometey”
Email: mail@crism.ru
Cand. Sc. (Eng) 49 Shpalernaya St, 191015 St Petersburg, Russian Federation
References
- Malinin , N.N., Prikladnaya teoriya plastichnosti i polzuchesti [Applied theory of plasticity and creep], Moscow: Mashinostroenie, 1975.
- Manson , S.S., The challenge to unity treatment of high temperature fatigue. A partisan proposal based on strain range partitioning, Fatigue at elevated temperature, ASTM STP 520, 1973, pp. 744-782.
- Matsuishi, M., Endo, T., Fatigue of metals subjected to varying stress, Fukuoka: Society of Mechanical Engineers, 1968.
- State National Standard GOST 25.101-83: Raschety i ispytaniya na prochnost. Metody skhematizatsii sluchainykh protsessov nagruzheniya elementov mashin i konstruktsy i statisticheskogo predstavleniya rezultatov [Calculations and strength tests. Methods of schematization of random loading processes of machine elements and structures and statistical presentation of results].
- Troshchenko, V.T., Deformirovanie i razrushenie metallov pri mnogotsiklovom nagruzhenii [Deformation and destruction of metals under multicycle loading], Kiev: Naukova dumka, 1981.
- Filatov, V.M., Predelnye sostoyaniya po obrazovaniyu makrotreshchin pri tsiklicheskom nagruzhenii [Limiting states for the formation of macro cracks under cyclic loading], Voprosy atomnoj nauki i tekhniki, 1978, V. 2, No 1 (21), pp. 114-123.
- Normy rascheta na prochnost oborudovaniya i truboprovodov atomnykh energeticheskikh ustanovok. PNAE G-7-002-86 [Calculation standards for the strength of equipment and pipelines of nuclear power plants], Moscow: Energoatomizdat, 1989.
- State National Standard GOST R 59115.9-2021: Obosnovanie prochnosti oborudovaniya i truboprovodov atomnykh energeticheskikh ustanovok. Poverochny raschet na prochnost [Substantiation of the strength of equipment and pipelines of nuclear power plants. Calculation for strength].
- State National Standard GOST R 59115.10-2021: Obosnovanie prochnosti oborudovaniya i truboprovodov atomnykh energeticheskikh ustanovok. Utochnenny poverochny raschet na stadii proektirovaniya [Substantiation of the strength of equipment and pipelines of nuclear power plants. Refined calculation at the design stage].
- State National Standard GOST R 70424-2022: Vnutrireaktornye ustroistva reaktora s zhidkometallicheskim natrievym teplonositelem. Raschet na prochnost na stadii proektirovaniya [In-reactor devices of a reactor with a liquid metal sodium coolant. Strength calculation at the design stage].
- State National Standard GOST R 59429-2022: Ustroistva vnutrikorpusnye vodo-vodyanogo energeticheskogo reaktora. Raschet na prochnost na stadii proektirovaniya [The devices are internal to the waterwater power reactor. Strength calculation at the design stage].
- Margolin , B.Z., Buchatsk y, A.A., Gulenko, A.G., Fedorova , V.A., Filatov, V.M., Prognozirovanie soprotivleniya tsiklicheskomu nagruzheniyu austenitnykh stalei pri uprugoplasticheskom deformirovanii, polzuchesti i neitronnom obluchenii [Prediction of resistance to cyclic loading of austenitic steels under elastic plastic deformation, creep and neutron irradiation], Voprosy Materialovedeniya, 2008, No 3 (55), pp. 72-88.
Supplementary files
