Dynamics of hydraulic drive with mono and bi-profile operating bodies of governors hydrodevices



Cite item

Full Text

Abstract

The article considers the possibility of improving dynamic characteristics of hydraulic drive when it is slowing down due to the use in governors hydrodevices the spools with two kinds of profiles of operating bodies, but not with one profile as it is used nowadays. According to the obtained formulas a comparative analysis of controlling device motion was made for various dimensionless parameters of the hydraulic drives, when using mono and bi-profile operating bodies. The procedure for finding the parameters of bi-profile operating bodies is considered.

About the authors

Y. Y. Gurevich

Moscow State University of Mechanical Engineering (MAMI)

Email: avtomex.msou@mail
Ph.D.; +7 903 001-74-04

M. Y. Ivochkin

Moscow State University of Mechanical Engineering (MAMI)

Email: avtomex.msou@mail
Ph.D.; +7 903 001-74-04

References

  1. Левитский Н.И., Цуханова Е.А. Расчет управляющих устройств для торможения гидроприводов. М.: Машиностроение, 1971. 231 с.
  2. Цуханова Е.А. Динамический синтез дроссельных управляющих устройств гидроприводов. М.: Наука, 1978. 255 с.
  3. Гуревич Ю.Я. Расчет управляющего устройства для гидропривода с регулируемым насосом. В кн. Пневматика и гидравлика. Вып. 8. - М.: Машиностроение, 1978, с. 56 - 66.
  4. Гуревич Ю.Я., Ивочкин М.Ю. К вопросу об улучшении динамических характеристик гидропривода при его торможении. Известия МГТУ «МАМИ» №1(19), 2014, т.1, с. 5 - 8.

Supplementary files

Supplementary Files
Action
1. JATS XML

Copyright (c) 2015 Gurevich Y.Y., Ivochkin M.Y.

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).