Articles

标题 文件
卷 15, 编号 3 (2021) Study of the effect of finite element dimensions on the simulation accuracy of adhesive bonding in automotive structures PDF
(Rus)
Liu Y., Zuzov V.
卷 15, 编号 3 (2021) Method for calculating technical characteristics and parameters of movement of scale models of wheeled vehicles, ensuring the similarity of the processes during testing PDF
(Rus)
Zhileykin M., Zhurkin M.
卷 15, 编号 3 (2021) Increasing the efficiency and safety of operation of underground tunnel escalators. Management of risks PDF
(Rus)
Popov V., Yelantsev V.
卷 15, 编号 3 (2021) Experimental studies of the effect of a hybrid inverter on power quality PDF
(Rus)
Shklyarskiy Y., Skam'in A., Vasil'kov O.
卷 15, 编号 3 (2021) Assessment of vehicle damage from the point of a complex technical system with its own structure PDF
(Rus)
Tupitsyn I., Zubris'kiy S., Krasavin P.
卷 15, 编号 3 (2021) Research on molecular energy storage PDF
(Rus)
Zuyev S., Maleyev R., Shmatkov Y., Khandzhalov M., Yakhutl' D.
卷 15, 编号 3 (2021) Identification of vehicle directional parameters using the sigma-point Kalman filters PDF
(Rus)
Chaplygin A., Kulikov I.
卷 15, 编号 3 (2021) Investigation of the environmental performance of a diesel engine when operating on multicomponent biofuel PDF
(Rus)
Plotnikov S., Sergeyev D., Smol'nikov M., Shipin A.
卷 15, 编号 3 (2021) A virtual test bench for determining the loads in the air suspension of the rear trolley of a truck at the early stages of design PDF
(Rus)
Maksimov R., Chichekin I.
卷 15, 编号 3 (2021) Finding the optimal compressor impeller material to improve the efficiency of the turbocharging system PDF
(Rus)
Rakhmatullin S.
卷 15, 编号 2 (2021) Comparative analysis of Russian and foreign regulatory requirements for vibration protection of a tractor operator PDF
(Rus)
Godzhayev Z., Godzhayev T., Lyashenko M., Shekhovtsov V., Iskaliyev A.
卷 15, 编号 2 (2021) Selection of the characteristics of the suspension system of the high-speed tracked robot PDF
(Rus)
Sarach Y., Tkachev Y., Krokhin M.
卷 15, 编号 2 (2021) Influence of the cross-sectional shape and length of the compressible sections on the characteristics of a linear peristaltic pump PDF
(Rus)
Grishin A.
卷 15, 编号 2 (2021) Investigation of the components of the cornering resistance of a tracked vehicle on a solid support base PDF
(Rus)
Padalkin B.
卷 15, 编号 2 (2021) Development of methodology for calculation of optimal distribution of electric power between power units of condensing power plant PDF
(Rus)
Ilichev V., Yurik E.
卷 15, 编号 2 (2021) Optimization of transient processes of the pneumatic servo drive taking into account the friction model with the Stribeck effect PDF
(Rus)
Kireyeva V., Trukhanov K.
卷 15, 编号 2 (2021) Study of suspension systems for experimental tanks of the USSR in the second half of the 20th century PDF
(Rus)
Tsipilev A., Nakaznoy O.
卷 15, 编号 2 (2021) Study of the combined drive of the road train PDF
(Rus)
Zuyev S., Maleyev R., Shmatkov Y., Shirokov P., Yakhutl' D.
卷 15, 编号 2 (2021) Algorithm of anti-lock braking system for two-axle vehicles with one driving axle with adaptive redistribution of braking forces PDF
(Rus)
Zhileykin M., Chugunov D.
卷 15, 编号 2 (2021) The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines PDF
(Rus)
Shabanov A., Kondratiev D., Vanin V., Dunin A.
卷 15, 编号 1 (2021) Improving the efficiency and safety of operation of underground tunnel escalators. Forecasting model PDF
(Rus)
Popov V., Yelantsev V.
卷 15, 编号 1 (2021) Vibration levels on operator’s workplace and vibration protection characteristics of seat suspensions PDF
(Rus)
Godzhayev Z., Lyashenko M., Shekhovtsov V., Potapov P., Iskaliyev A.
卷 15, 编号 1 (2021) Calculation of wind turbine generator power characteristics using Windpowerlib software module PDF
(Rus)
Ilichev V., Shevelev D.
卷 15, 编号 1 (2021) Modern approach to testing and validation of driver assistance systems PDF
(Rus)
Toropov Y., Trusov Y., Vashurin A., Moshkov P.
卷 15, 编号 1 (2021) Calculation of the coefficient of local hydraulic diaphragm resistance in transitional and laminar areas of flow PDF
(Rus)
Kondratyev A., Ogorodnik K., Frikha M.
卷 15, 编号 1 (2021) Numerical simulation of dynamic processes in transmission of vehicle PDF
(Rus)
Hoodorozhkov S., Krasilnikov A.
卷 15, 编号 1 (2021) Mathematical modeling of a system for monitoring the insulation resistance of a high-voltage power grid of a hybrid vehicle PDF
(Rus)
Malyshev A., Grunenkov Y., Debelov V., Kozlovskiy V., Shishkov A.
卷 15, 编号 1 (2021) Topological optimization of the roof structure of a passenger car in order to increase energy intensity in a side impact PDF
(Rus)
Sulegin D., Zuzov V.
卷 15, 编号 1 (2021) Numerical study of the effect of droplet coagulation intensity on polydisperse aerosol fraction distribution PDF
(Rus)
Tukmakov D.
卷 15, 编号 1 (2021) Investigation of the environmental characteristics of a diesel engine when operating on activated fuel PDF
(Rus)
Plotnikov S., Kartashevich A., Motovilova M.
卷 15, 编号 1 (2021) Method for determining the temperature fields of the spark plug PDF
(Rus)
Yakhutl' D., Maleyev R., Zuyev S., Shmatkov Y., Ryabykh Y.
卷 14, 编号 4 (2020) Reduced rutting of wide-grip sprinklers PDF
(Rus)
Zhuravleva L., Tkhuan N.
卷 14, 编号 4 (2020) Optimization of the design and experimental study of the stress-strain state of the rear suspension balancer of an all-terrain vehicle PDF
(Rus)
Shabolin M.
卷 14, 编号 4 (2020) Investigation of the relationship between theoretical and actual turning radii of a tracked vehicle using mathematical modeling PDF
(Rus)
Stadukhin A.
卷 14, 编号 4 (2020) Results of field studies of a tractor of traction class 1,4 with an elastic damping mechanism in a power drive PDF
(Rus)
Sen'kevich S., Il'chenko Y., Godzhayev Z., Duryagina V.
卷 14, 编号 4 (2020) Volumetric hydraulic drive with series connection of hydraulic actuators PDF
(Rus)
Pil'gunov V., Yefremova K.
卷 14, 编号 4 (2020) Model of the dynamics of a wheeled vehicle for a complex of full-scale-mathematical modeling PDF
(Rus)
Kositsyn B.
卷 14, 编号 4 (2020) Preliminary synthesis of algorithms for automatic control of automobile continuously variable transmissions with flexible links PDF
(Rus)
Yesakov A., Kretov A., Krasavin P.
卷 14, 编号 4 (2020) Improving the operational efficiency of the linear type peristaltic pump PDF
(Rus)
Grishin A.
卷 14, 编号 4 (2020) Evaluation of indicators of curvilinear movement of a road train using mathematical simulation PDF
(Rus)
Gorelov V., Yevseyev K., Chudakov O., Balkovskiy K.
卷 14, 编号 3 (2020) Technical and economic analysis of the efficiency of a low-power wind farm in the climatic conditions of the center of the European part of Russia PDF
(Rus)
Jinov A., Shevelev D., Metlitsky N.
卷 14, 编号 3 (2020) Problems of using active-recuperative suspension and ways to solve them PDF
(Rus)
Zamyslov V., Yesakov A.
卷 14, 编号 3 (2020) Entropy-statistical analysis of the air conditioning cycle of an aircraft PDF
(Rus)
Merkulov V., Tishchenko I., Abalakin S.
卷 14, 编号 3 (2020) Mathematical modeling of the functioning process of a single-cylinder air-cooled diesel engine taking into account the consumption of crankcase gases PDF
(Rus)
Pavlov D., Platonov K., Khmelev R.
卷 14, 编号 3 (2020) Comparative characteristics of diesel engines and gas turbine power plants for mobile vehicles PDF
(Rus)
Gusarov V., Godzhaev Z.
卷 14, 编号 3 (2020) Simulation of vehicle tires based on the finite element method PDF
(Rus)
Tomashevskiy S.
卷 14, 编号 3 (2020) Methodology for conducting climatic tests in cabins and habitable compartments of wheeled and tracked vehicles PDF
(Rus)
Vereshchagin S.
卷 14, 编号 3 (2020) Mobility of aggregates of promising missile systems based on road trains with an active trailed link PDF
(Rus)
Berdnikov A., Strel'tsov R., Dyunov V., Zol'nikov I.
卷 14, 编号 3 (2020) Experimental evaluation of the load capacity of the rollers of gravity conveyors for pallets PDF
(Rus)
Safronov Y., Nosko A.
卷 14, 编号 3 (2020) Increase of strength of cast-iron cylinder liners of engines of road construction vehicles PDF
(Rus)
Ovsyannikov V., Shpitko G., Nekrasov R., Vas'kov D.
卷 14, 编号 3 (2020) Overview of approaches to driver fatigue recognition and existing technical solutions PDF
(Rus)
Saprykin Y., Ryazantsev V., Smirnov A.
卷 14, 编号 3 (2020) Optimization of the ethanol-fuel emulsion composition for use in diesel engines PDF
(Rus)
Plotnikov S., Kartashevich A., Plyago A., Pachurin G.
卷 14, 编号 2 (2020) Method for assessing the effectiveness of the use of electromechanical transmissions of vehicles at the design stage PDF
(Rus)
Padalkin B., Ivanenkov V., Kositsyn B., Stadukhin A., Balkovskiy K.
卷 14, 编号 2 (2020) Assessment of the stress-strain state in the weld zone for the forklift truck frame PDF
(Rus)
Shcherbakov A., Pushkarev A., Manvelova N.
卷 14, 编号 2 (2020) Development of a boost system turbocompaund piston engine PDF
(Rus)
Filippov A., Kaminsky V., Kaminsky R., Titchenko A., Kostyukov E.
卷 14, 编号 2 (2020) Development and testing of a mathematical model of the engine pre-start operation at low ambient temperatures PDF
(Rus)
Yelagin M., Pavlov D., Khmelev R.
卷 14, 编号 2 (2020) The choice of the rational design of the mobile robot mover for urban environment PDF
(Rus)
Tsipilev A., Smirnov I.
卷 14, 编号 2 (2020) Analysis of the heat balance of a spacesuit in a solar airplane PDF
(Rus)
Rezanov E., Merkulov V., Tishchenko V.
卷 14, 编号 2 (2020) Establishing relationships between fuel economy and gear ratios of bus transmission units PDF
(Rus)
Kravets V., Musarskiy R., Tumasov A.
卷 14, 编号 2 (2020) Study of the effectiveness of the electromechanical system of active vibration protection of a vehile with various regulators PDF
(Rus)
Randin D., Tulupov P.
卷 14, 编号 2 (2020) Electromechanical transmission for tractors and road-building machinery PDF
(Rus)
Porshnev G., Dobretsov R., Krasilnikov A.
卷 14, 编号 2 (2020) Mathematical modeling of drives with tandem pneumatic cylinders PDF
(Rus)
Zhurkin N., Donskoy A., Zharkovskiy A.
卷 14, 编号 2 (2020) Interaction of elements of the telescopic boom as a result of sudden load removal PDF
(Rus)
Potakhov E., Vatulin Y.
卷 14, 编号 2 (2020) Thermodynamic similar indicator diagrams of the heat engines Energy non-dimensional diagram of the heat engine closed cycle PDF
(Rus)
Kalnitskiy F., Morozov D., Tatarov M., Fedulov A.
卷 13, 编号 1 (2019) Improvement of four-wheel drive vehicle controllability with a connected front axle through the redistribution of torque PDF
(Rus)
ZHilejkin M., EHranosyan A.
卷 13, 编号 1 (2019) Improving the energy efficiency of vehicle electrical systems PDF
(Rus)
CHernov A., Akimov A.
卷 13, 编号 1 (2019) Development of multicomponent mixed bio-hydrocarbon fuel for diesel engines PDF
(Rus)
Soo S., Sater H., Hodyakov A., Hlopkov S.
卷 13, 编号 1 (2019) Substantiation of the requirements for the suspension of unmanned transport vehicles PDF
(Rus)
Sarach E., Smirnov I., Tkachev Y.
卷 13, 编号 1 (2019) Selection of parameters of a three-flow parallel electromechanical transmission of a tracked vehicle PDF
(Rus)
Padalkin B., Staduhin A.
卷 13, 编号 1 (2019) Agricultural tractors on Russian market (based on the International exhibition “Agrosalon 2018”) PDF
(Rus)
Parfenov A.
卷 13, 编号 1 (2019) Study of the modes of operation of capacitive energy storage in the automobile engine start systems PDF
(Rus)
Maleev R., Zuev S., Lavrikov A., Grebenchikov N.
卷 13, 编号 1 (2019) Comparative analysis of the options for strengthening the cockpit of the D2 class buggy according to the technical regulations of the competition PDF
(Rus)
Bazhenov E., Bujnachev S., Kustovskij A.
卷 13, 编号 1 (2019) Study of the balancing method of the charging station for lithium-ion batteries PDF
(Rus)
Zuev S., Aleksyuk M., Kanarejkin A., Habarova S., Bogachev S.
卷 13, 编号 1 (2019) Flow diagrams for tribological testing of transport engineering units PDF
(Rus)
Glazunov D.
卷 13, 编号 1 (2019) Method of calculating the heat and stress-deformed state of the cylinder head of a transport diesel with liquid cooling PDF
(Rus)
Gotz A., Klevtsov V.
卷 12, 编号 4 (2018) Reducing the emission of solid particles from the exhaust gases of the internal combustion engine by increasing the efficiency of the catalytic converter PDF
(Rus)
Kukis V., Omel'chenko E.
卷 12, 编号 4 (2018) The way to improve the efficiency of the neutralization system of nitrogen oxides of diesel internal combustion engines and its efficiency PDF
(Rus)
Shabanov A., Solomin V., Shabanov A.
卷 12, 编号 4 (2018) The calculation of the peristaltic pump characteristics taking into account the roughnesses on the internal surface of the working member PDF
(Rus)
Grishin A.
卷 12, 编号 4 (2018) Problems of finding the best solutions to ensure the passive safety of the cabins of trucks at a minimum weight PDF
(Rus)
Goncharov R., Zuzov V.
卷 12, 编号 4 (2018) Limits of applicability of the standard method for estimating the torsional rigidity of spatial frames of buggy vehicle PDF
(Rus)
Bazhenov E., Bujnachev S., Kustovskij A.
卷 12, 编号 4 (2018) Calculated and experimental evaluation of the performance of the brake disc made of titanium alloy PDF
(Rus)
Eremin V., Komarova M., Eremin G.
卷 12, 编号 4 (2018) Concept design - creating the image of the future PDF
(Rus)
Lepeshkin I.
卷 12, 编号 4 (2018) Ways to improve diesel engine fuel systems PDF
(Rus)
Strel'cov R., Berdnikov A., Vasil'ev V., Dyunov V., Mel'nikov E., Ladanov V.
卷 12, 编号 4 (2018) Topology optimization in ROPS-safe design process of operator cabin for forestry, agricultural and construction machinery PDF
(Rus)
Vdovin D.
卷 12, 编号 4 (2018) Power plants of motor transport: development prospects PDF
(Rus)
Fomin V., Gusarov V.
卷 12, 编号 4 (2018) The concept of the controlled movement of the tracked vehicle PDF
(Rus)
Beketov S.
卷 12, 编号 4 (2018) Calculation and experimental analysis of the V-belt variator motor PDF
(Rus)
Balovnev N., Dmitrieva L.
卷 12, 编号 4 (2018) Diagnosis of electronic engine control systems for LADA automobile PDF
(Rus)
Bazhenov Y., Kalenov V.
卷 12, 编号 3 (2018) The toxicity study of diesel engines working on biofuels based on methyl alcohol PDF
(Rus)
Lihanov V., Lopatin O.
卷 12, 编号 3 (2018) Age of aerodynamics of automobiles PDF
(Rus)
Korolev E., ZHamalov R., Bernackij V.
卷 12, 编号 3 (2018) Swelling of samples of automotive rubber products in standard fluid, engine oil and tribotechnical compound PDF
(Rus)
Azanov A., Bernackij V., Razuvaev P., Hlopkov S., Hodyakov A.
卷 12, 编号 3 (2018) The training of specialists in sphere of power engineering PDF
(Rus)
Fomin V., Gots A.
卷 12, 编号 3 (2018) Comparison of the analytical solutionof efficieтcy regenerative rotating heatexchangethe device with resultsof numericalcalculations PDF
(Rus)
Kalnitsky F., Kostyukov A.
卷 12, 编号 3 (2018) The method for determining the rational parameters of the kinematics of the suspension systems for high-speed tracked vehicles PDF
(Rus)
Cipilev A., Sarach E.
卷 12, 编号 3 (2018) The method of determining the efforts of the pre-tightening of bolts to a bearing of the crankshaft, automobile and tractor engines PDF
(Rus)
Gots A.
卷 12, 编号 3 (2018) Development of vehicle undercarriage with roadster body using topological optimization PDF
(Rus)
Basov A., Smirnov A.
卷 12, 编号 3 (2018) Method for calculating the characteristics of a linear type peristaltic pump with incomplete compression of the working member PDF
(Rus)
Grishin A.
卷 12, 编号 3 (2018) Investigation of the main factors of the process of ignition of a homogeneous mixture from compression in an ICE PDF
(Rus)
Makarov A., Smirnov S., Kostyukov A., Ponomareva K.
卷 12, 编号 3 (2018) Digital PID controller for pneumatic and hydraulic systems PDF
(Rus)
Truhanov K.
卷 12, 编号 2 (2018) Prospects for the use of automated and robotized electric drives on mobile energy equipment and agricultural machinery working bodies PDF
(Rus)
Godzhaev Z., Izmajlov A., Lachuga Y., SHogenov Y.
卷 12, 编号 2 (2018) Determination of the time and the path of acceleration of a vehicle equipped with a gearbox without switching-off of the power flow PDF
(Rus)
Ryabev A., Parfenov A.
卷 12, 编号 2 (2018) Optimization of the working cycle of a transport diesel engine by simulating the combustion process with a double Wiebe function PDF
(Rus)
Kamaltdinov V., Markov V., Lysov I., Popov A., Smolij A.
卷 12, 编号 2 (2018) Influence of the elements of the spatial bearing system of the vehicle of increased cross-country ability of the “buggy” class on the parameters of its stress-strain state PDF
(Rus)
Bazhenov E., Bujnachev S., Kustovskij A.
卷 12, 编号 2 (2018) Mathematical model for assessing the influence of a coupled suspension system on the smooth running of a tracked vehicle PDF
(Rus)
Sarach E., Cipilev A., Kurasova M.
卷 12, 编号 2 (2018) Quasi-finite element model of rolling elastic wheels on uneven deformable substructure in nonlinear motion of a wheeled vehicle PDF
(Rus)
Volskaja N., Zhileykin M., Zakharov A., Panshin M.
卷 12, 编号 2 (2018) Topological optimization of the automobile bumper design under impact from the passive safety standpoint PDF
(Rus)
Goncharov R., Zuzov V.
卷 12, 编号 2 (2018) One-dimensional univariate work simulation of turbocharged engine with restrictor before compressor inlet PDF
(Rus)
Tatarov M.
卷 12, 编号 2 (2018) Linear positioner based on pneumatic muscle PDF
(Rus)
Efremova K., Pil'gunov V.
卷 12, 编号 2 (2018) Investigation of internal dynamics of a two-piston air-hydraulic spring PDF
(Rus)
Cipilev A., ZHarov S.
卷 12, 编号 2 (2018) The digital gauge of a tension of a belt of a gas-distributing mechanism and the generator in VAZ vehicles PDF
(Rus)
Ermakov V., Maleev R., Holodov A., SHmatkov Y.
卷 12, 编号 1 (2018) Modeling of the mechanism of appearance of external infrasound of land vehicles PDF
(Rus)
Nyunin B., Grafkina M., Sviridova E.
卷 12, 编号 1 (2018) Modernization of the cooling system for diesel engines of the YAMZ family with the aim of reducing cavitation damages PDF
(Rus)
Strel'tsov R., Vasil'ev V., Arabyan A., Mamoshin A.
卷 12, 编号 1 (2018) Automation of the control of the differential lock in the transmission of a multi-axle wheeled vehicle PDF
(Rus)
Safonov B., Kotiev G., Smirnov A.
卷 12, 编号 1 (2018) Frequency analysis of the system of stabilization of vertical reactions on the wheels PDF
(Rus)
Al'salamekh B., Ryazantsev V.
卷 12, 编号 1 (2018) Improvement of methods for calculating the interaction of propellers of multi-axle wheeled vehicles with barrier obstacles PDF
(Rus)
Papunin A., Belyakov V.
卷 12, 编号 1 (2018) Automated traffic control system based on recognition of the road scene and its objects PDF
(Rus)
Porubov D., Beresnev P., Tyugin D., Tumasov A., Belyakov V., Zezyulin D.
卷 12, 编号 1 (2018) Investigation of the driven disks of hydromechanical transmission BELAZ with the new LZ_G-Base oil and the friction materials FM-15 and MK-5 PDF
(Rus)
Reginya V., Il'yushchenko A., Leshok A., Rogovoy A., Gryazev D., Petrov V.
卷 12, 编号 1 (2018) The automobile and tractor diesel engine, adapted to work on the liquefied hydrocarbon gas on the gas-diesel process PDF
(Rus)
Izmaylov A., Savel'ev G., Kochetkov M., Ovchinnikov E., Uyutov S.
卷 12, 编号 1 (2018) Investigation of fuel injection in the Common Rail system on the unique scientific facility “Injection” PDF
(Rus)
Kamaltdinov V., Markov V., Lysov I., Popov A., Smoliy A.
卷 12, 编号 1 (2018) Ejector-type heat exchangers in the air conditioning in transport PDF
(Rus)
Merkulov V., Popov A., Polikarpov A., Tishchenko I.
卷 12, 编号 1 (2018) The electric starting systems of automobile internal combustion engines with alternative sources of current PDF
(Rus)
Maleev R., Shmatkov Y., Kholodov A.
卷 12, 编号 1 (2018) Calculation investigation of the strength of the composite wheel rim PDF
(Rus)
Bol'shikh A., Vdovin D., Eremin G.
卷 11, 编号 4 (2017) Load distribution by zones of frame sub-constructions of D2 class buggy racing car PDF
(Rus)
Bazhenov E., Buynachev S., Kustovskiy A.
卷 11, 编号 4 (2017) The new standard on the administrative aspect of registration changes in the design of the vehicle PDF
(Rus)
Girutskiy O., Kirillov K.
卷 11, 编号 4 (2017) Dependence of durability and wear resistance on forcing and inaccuracies in ICE production PDF
(Rus)
Kochenov V., Kazakov S., Grunin K.
卷 11, 编号 4 (2017) Efficiency of application of direct-drive circuit for improvement of starting characteristics of gas turbine engine PDF
(Rus)
Chechulin A., Krivoshev I.
卷 11, 编号 4 (2017) Absorption of gasoline vapors in automobile adsorber with a carbon filter PDF
(Rus)
Khodyakov V., Rachkova V., Bernatskiy V., Khlopkov S., Abu-Nidzhim R.
卷 11, 编号 4 (2017) Necessity to create agricultural vehicles PDF
(Rus)
Godzhaev Z., Evtyushenkov N., Kryukov M., Zakarchevskiy O.
卷 11, 编号 4 (2017) Speed characteristics of automobile diesel engine operating on natural gas PDF
(Rus)
Likhanov V., Grebnev A., Skryabin M., Toropov A.
卷 11, 编号 4 (2017) A crane-manipulator transfer position impact on a chassis loadings of a base vehicle PDF
(Rus)
Lagerev A., Lagerev I.
卷 11, 编号 4 (2017) Determination of the geometric shape of the air collector for supplying thermal energy to the heating system of electric bus batteries PDF
(Rus)
Prokhorov I., Butarovich D.
卷 11, 编号 4 (2017) Comparison of traction and longevity of caterpillar driving machines of agricultural tractors PDF
(Rus)
Shchel'tsyn N., Beynenson V., Fedotkin R., Kryuchkov V., Belyy I., Revenko V.
卷 11, 编号 4 (2017) Development of an experimental research complex for determining parameters of interaction of a pneumatic tire with ground PDF
(Rus)
Vol'skaya N., Zakharov A., Anisimov M.
卷 11, 编号 4 (2017) Improvement of design of water evaporative air coolers in tractor cabins PDF
(Rus)
Mikhaylov V., Sharipova N., Dmitriev M.
卷 11, 编号 3 (2017) Technique for evaluating the efficiency of a V-belt variator in a light vehicle PDF
(Rus)
Luk'yanov A., Starikov A.
卷 11, 编号 3 (2017) Mathematical models of tires and calculation of contact pressure on soil PDF
(Rus)
Manafi Sheydan H.
卷 11, 编号 3 (2017) The choice of the concept of automobile with combined energy transmission of expanded functionality PDF
(Rus)
Baulina E., Krutashov A., Serebryakov V.
卷 11, 编号 3 (2017) Experimental verification of the reliability of the method of designing driving wheels of pin gearing with rubber-reinforced caterpillars PDF
(Rus)
Sharipov V., Fedotkin R., Kryuchkov V., Bogdanov K., Volkov P.
卷 11, 编号 3 (2017) Design and calculation of hydrostatic steering PDF
(Rus)
Sharipov V., Esenovskiy-Lashkov M., Klimova E.
卷 11, 编号 3 (2017) Modern methods of synthesis of automatic planetary gearboxes PDF
(Rus)
Salamandra K.
卷 11, 编号 3 (2017) Optimization of vehicle acceleration process, taking into account the mode of operation of its engine PDF
(Rus)
Ulanov A.
卷 11, 编号 3 (2017) Optimization of the turbine diffuser of a multipurpose microturbine PDF
(Rus)
Kosach L., Gornovskiy A., Kostyukov A., Eliseev K.
卷 11, 编号 3 (2017) Problems in the implementation of the control system for vertical reactions of vehicle wheels PDF
(Rus)
Ryazantsev V., Al'salamekh B., Levenkov Y.
卷 11, 编号 3 (2017) Design of an independent vehicle suspension guide using the topological optimization method PDF
(Rus)
Vdovin D., Prokopov V., Ryabov D.
卷 11, 编号 3 (2017) Optimization and debugging of a low-toxic combustion chamber with the use of numerical modeling of intrachamber processes PDF
(Rus)
Gornovskiy A., Valeev A., Kosach L., Kostyukov A.
卷 11, 编号 2 (2017) Algorithm for navigation of ground-based transport-technological facilities on the basis of integrated inertial-satellite navigation and odometer data PDF
(Rus)
Novikov P., Sheypak A., Gerdi V., Novikov V., Enin V.
卷 11, 编号 2 (2017) Static characteristics of the pneumatic power amplifier "nozzle-shutter" PDF
(Rus)
Pil'gunov V., Efremova K.
卷 11, 编号 2 (2017) Perspectives of using humidification subsystems for air conditioning in transport PDF
(Rus)
Merkulov V., Popov A.
卷 11, 编号 2 (2017) The hydrodifferential rectifier of the moment of inertial automatic transmission of mobile machines PDF
(Rus)
Greben'kov D.
卷 11, 编号 2 (2017) The use of hydraulic communication channel in technical systems PDF
(Rus)
Trukhanov K.
1 - 150 的 2404 信息 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >> 

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).