CREATION OF NEW ELEMENTS OF SENSOR STRUCTURES OF INFORMATION AND MEASUREMENT SYSTEMS BASED ON SILICON MICROPROCESSING TECHNOLOGIES
- Авторлар: Filatova A.A.1, Pautkin V.E.1, Trazanov D.V.1
-
Мекемелер:
- Scientific-Research Institute of Physical Measurements
- Шығарылым: № 3 (2025)
- Беттер: 46-51
- Бөлім: DESIGN AND TECHNOLOGY OF INSTRUMENTATION AND ELECTRONIC EQUIPMENT
- URL: https://journal-vniispk.ru/2307-5538/article/view/318763
- DOI: https://doi.org/10.21685/2307-5538-2025-3-6
- ID: 318763
Дәйексөз келтіру
Толық мәтін
Аннотация
Background. The main protective masking layers used in the formation of sensors of information-measurement systems by anisotropic etching of silicon are described. Such layers include films of silicon dioxide and nitride applied to the surface of silicon wafers before technological operations of anisotropic etching. Materials and methods. It is shown that when using combined masks consisting of at least two protective layers, it is possible to form silicon structures with sensors having a complex etching profile. This increases the manufacturability of the sensitive elements of micromechanical sensors, since the formation of the mask topology on the surface of silicon wafers leads to improved manufacturing quality and allows you to create new structures of sensitive sensor elements. Results and conclusions. These technical solutions make it possible to create new elements of sensor structures of information-measurement systems (IMS), as well as to increase the manufacturability of their manufacture.
Авторлар туралы
Anna Filatova
Scientific-Research Institute of Physical Measurements
Хат алмасуға жауапты Автор.
Email: nsmvaa@gmail.com
Design engineer
(8/10 Volodarskogo street, Penza, Russia)Valeriy Pautkin
Scientific-Research Institute of Physical Measurements
Email: pautkin_ve@niifi.ru
Candidate of technical sciences, head of department
(8/10 Volodarskogo street, Penza, Russia)Dmitriy Trazanov
Scientific-Research Institute of Physical Measurements
Email: dtrazanov00@mail.ru
Design engineer
(8/10 Volodarskogo street, Penza, Russia)Әдебиет тізімі
- Lyutsko K.S., Gaykevich D.N. MEMS pressure sensors. Priborostroenie–2023: sb. dokl. 16-y Mezhdunar. nauch.-tekhn. konf. = Instrument engineering–2023 : collection of the 16th International scientific and technical conf. Minsk, 2023:408–409. (In Russ.)
- Lysenko I.E., Ezhova O.A. Investigation of the effect of suspension element parameters on the natural frequency of a micromechanical linear acceleration sensor design. Nano- i mikrosistemnaya tekhnika = Nanoand microsystem engineering. 2016;18(6):386–388. (In Russ.)
- Pautkin V.E., Prilutskaya S.V. Geometric stop etching in microelectromechanical systems technology. Izmerenie. Monitoring. Upravlenie. Kontrol’ = Measurement. Monitoring. Management. Control. 2017;(4): 50–54. (In Russ.)
- Gotra Z.Yu. Tekhnologiya mikroelektronnykh ustroystv: spravochnik = Technology of microelectronic devices: reference book. Moscow: Radio i svyaz', 1991:528. (In Russ.)
- Monk D.J., Soane D.S., Howe R.T. Enhanced Removal of Sacrificial Layers for Silicon Surface Micromachining. Technical Digest : the 7th Int. Conf. on Solid-State Sensors and Actuators. Yokohama, Japan, 1993:280–283.
- French P.J., Sarro P.M., Mallee R. et al. Optimization of a Low-Stress Silicon Nitride Process for Surface Micromachining Applications. Sensors and Actuators. 1997;(A 58):149–157.
- Veselov D.S., Voronov Yu.A. Features of the application of liquid etching of silicon in the manufacturing technology of MEMS structures. Datchiki i sistemy = Sensors and systems. 2016;(4):26–28. (In Russ.)
- Li Y.X., French P.J., Wolffenbuttel R.F. Selective reactive ion etching of silicon nitride over silicon using CHF3 with N2 addition. Vacuum Science and Technology. 1995;(B 13):2008–2012.
- Abdullaev D.A., Zaytsev A.A., Kel'm E.A. Selective plasmochemical etching of silicon nitride relative to silicon oxide. Nano- i mikrosistemnaya tekhnika = Nano- and microsystem engineering. 2014;(2):17–19. (In Russ.)
- Baydakova N.A., Verbus V.A., Morozova E.E. et al. Selective etching of Si, SiGe and Ge and its use to increase the efficiency of silicon solar cells. Fizika i tekhnika poluprovodnikov = Physics and technology of semiconductors. 2017;51(12):1599–1604. (In Russ.)
- Korolev M.A., Krupkina T.Yu., Reveleva M.A. Tekhnologiya, konstruktsii i metody modelirovaniya kremnievykh integral'nykh mikroskhem: v 2 ch. = Technology, designs and modeling methods of silicon integrated circuits: in 2 parts. Moscow: BINOM. Laboratoriya znaniy, 2007;(part 1):397. (In Russ.)
- Legtenberg R., Jansen H., de Boer M., Elwenspoek M. Anisotropic Reactive Ion Etching of Silicon Using SF6/O2/CHF3 Gas Mixtures. Electrochemical Society. 1995;142(6):2020–2028.
- Sokolov L.V., Zhukov A.A., Parfenov N.M., Anurov A.E. Analysis of modern technologies of volumetric microprofiling of silicon for the production of sensitive elements of sensors and MEMS. Nano- i mikrosistemnaya tekhnika = Nano- and microsystem engineering. 2014;(10):27–35. (In Russ.)
- Sokolov L.V., Parfenov N.M. Technological features of the formation of three-dimensional MEMS. Nanoi mikrosistemnaya tekhnika = Nano- and microsystem engineering. 2011;(11):19–26. (In Russ.)
Қосымша файлдар
