| 期 |
标题 |
文件 |
| 卷 38, 编号 10 (2018) |
Life of Submersible-Pump Components |
(Eng)
|
|
Akhmedpashaev M., Akhmedpashaev M., Begov Z.
|
| 卷 38, 编号 10 (2018) |
Two-Channel Capacitive Ignition System with a Transistor Converter for Ground-Based Gas-Turbine Engines |
(Eng)
|
|
Gizatullin F., Salikhov R., Sitnikov R.
|
| 卷 38, 编号 10 (2018) |
Determining Pipeline Eigenfrequencies on the Basis of the Shock Response of Prefabricated Structures |
(Eng)
|
|
Yakhnenko M., Bobarika I., Demidov A.
|
| 卷 38, 编号 10 (2018) |
Optimization of the High-Speed Turning of High-Temperature Nickel Alloy |
(Eng)
|
|
Albagachiev A., Krasko A., Stramtsova E.
|
| 卷 38, 编号 10 (2018) |
Theory of Intermittent Cutting. 6. Theoretical Aspects of Tool Entry in the Blank |
(Eng)
|
|
Bol’shakov A.
|
| 卷 38, 编号 10 (2018) |
Energy Processes in Complex Systems |
(Eng)
|
|
Vasin S., Plakhotnikova E.
|
| 卷 38, 编号 10 (2018) |
Influence of Spindle Wobble in Turning on the Workpiece’s Surface Topology |
(Eng)
|
|
Zakovorotny V., Gvindzhiliya V.
|
| 卷 38, 编号 10 (2018) |
Factors Affecting the Surface Roughness in Burnishing |
(Eng)
|
|
Smirnov A., Kuznetsov V.
|
| 卷 38, 编号 10 (2018) |
Turning of Discontinuous Surfaces by Cutters with Handles of Different Structure |
(Eng)
|
|
Borodkin N., Vasin L., Vasin S.
|
| 卷 38, 编号 10 (2018) |
Structure of the Force Field near the Cutter Tip with a Highly Damping Handle |
(Eng)
|
|
Borodkin N., Vasin L., Vasin S.
|
| 卷 38, 编号 10 (2018) |
Cutters for Machining End Channels |
(Eng)
|
|
Grechishnikov V., Pivkin P., Isaev A., Romanov V., Maksimov Y.
|
| 卷 38, 编号 10 (2018) |
Ultrafast Sharpening of a Hard-Alloy Tool |
(Eng)
|
|
Rechenko D., Popov A., Babaev A., Laptev N.
|
| 卷 38, 编号 10 (2018) |
New Milling-Machine Design |
(Eng)
|
|
Pini B., Maksimov Y., Popov A.
|
| 卷 38, 编号 9 (2018) |
Dynamic Optimization of Switched-Reluctance Motors |
(Eng)
|
|
Petrushin A., Kashuba A.
|
| 卷 38, 编号 9 (2018) |
Dynamics of Synchronous Hydromechanical Drive in Mobile Machine |
(Eng)
|
|
Rybak A., Temirkanov A., Lyakhnitskaya O.
|
| 卷 38, 编号 9 (2018) |
Diagnostics of Rotary Equipment by Means of Entropic Indices Based on Electrical Signals |
(Eng)
|
|
Chernov A., Abidova E., Khegai L.
|
| 卷 38, 编号 9 (2018) |
Cutting Methods for Thick Titanium-Alloy Slabs |
(Eng)
|
|
Polyanskii S., Butakov S., Mal’tsev L., Ol’kov I., Popov M., Aleksandrov V.
|
| 卷 38, 编号 9 (2018) |
Theory of Intermittent Cutting. 5. Description of Tool Entry in the Blank |
(Eng)
|
|
Bol’shakov A.
|
| 卷 38, 编号 9 (2018) |
Electron-Beam Melting in the Manufacture of Gas-Turbine Components |
(Eng)
|
|
Albagachiev A., Krasko A., Baranova N., Stramtsova E., Mokanu A.
|
| 卷 38, 编号 9 (2018) |
Diffusional Boriding of Subeutectoidal Tool Steels: Technology and Outcome |
(Eng)
|
|
Gadalov V., Emel’yanov S., Filatov E., Makarova I., Sal’nikov V.
|
| 卷 38, 编号 9 (2018) |
Drone-Based Autonomous Robot Diagnostic System for Gas and Oil Pipelines in the Arctic and Far North |
(Eng)
|
|
Kabaldin Y., Shatagin D., Kiselev A., Zhelonkin M., Golovin A.
|
| 卷 38, 编号 9 (2018) |
Assessing the Manufacturability of Product Designs |
(Eng)
|
|
Bazrov B.
|
| 卷 38, 编号 9 (2018) |
Blanks for Bronze-Coated Frictional Disks Used in Vehicle Transmissions |
(Eng)
|
|
Krykhtin Y., Karlov V.
|
| 卷 38, 编号 9 (2018) |
Improving the Reliability of Large High-Speed Systems |
(Eng)
|
|
Shalobaev E., Demina A.
|
| 卷 38, 编号 9 (2018) |
Robot Positioning in Assembly and Installation |
(Eng)
|
|
Akhatov R., Odnokurtsev K., Zykova E.
|
| 326 - 350 的 991 信息 |
<< < 9 10 11 12 13 14 15 16 17 18 > >>
|
