| 期 |
标题 |
文件 |
| 卷 8, 编号 4-4 (2014) |
Stress-strain state of the tool in the flow process of a thin plastic layer |
(Rus)
|
|
Bodunov M., Bobrodin I., Bodunov D.
|
| 卷 8, 编号 4-4 (2014) |
Thermoviscoplastic cyclic deformation and fracture of materials |
(Rus)
|
|
Bondar V., Danshin V.
|
| 卷 8, 编号 4-4 (2014) |
Determination of mechanical properties of foam aluminum under impact loading |
(Rus)
|
|
Bondar V., Temis Y., Biryukov M.
|
| 卷 8, 编号 4-4 (2014) |
Longitudinal bending of compound rod with symmetric tightening |
(Rus)
|
|
Vorontsov A.
|
| 卷 8, 编号 4-4 (2014) |
Calculation of operators, which solve problems of heat conduction in straight cylinders using semigroup symmetry |
(Rus)
|
|
Ivanov D.
|
| 卷 8, 编号 4-4 (2014) |
Generalized integral pulses of flows and forces and potentials of visco-elastic bodies of Boltzmann-Kelvin type |
(Rus)
|
|
Korol E.
|
| 卷 8, 编号 4-4 (2014) |
Self-oscillations in one-dimensional elastic systems with friction |
(Rus)
|
|
Pozhalostin A., Panshina A.
|
| 卷 8, 编号 4-4 (2014) |
Algebra of electric and weak charges |
(Rus)
|
|
Kalpina N., Ketsaris A.
|
| 卷 8, 编号 4-4 (2014) |
Gravitational analogue of the Earth and its shape |
(Rus)
|
|
Rusanov P.
|
| 卷 8, 编号 4-4 (2014) |
Determination of optimal parameters of damper system for explosion protection of a structure on the basis of foam aluminum |
(Rus)
|
|
Bondar V., Temis Y., Biryukov M.
|
| 卷 8, 编号 4-4 (2014) |
Experience of using the variational principle of Hamilton-Ostrogradskiy to practical issues of compilation of differential equations of autonomous small oscillations |
(Rus)
|
|
Serov M., Averyanova G., Karnacheva E.
|
| 卷 8, 编号 3-4 (2014) |
Methods for identification and optimization in intelligent systems |
(Rus)
|
|
Kryzhanovskaya T., Pupkov K.
|
| 卷 8, 编号 3-4 (2014) |
Adjusted method of solving the contact problem for an annular layer taking into account the friction forces. Statement 2. A solution of functional equations defining the mathematical model of the contact problem |
(Rus)
|
|
Bozhkova L., Noritsina G., Ryabev V.
|
| 卷 8, 编号 3-4 (2014) |
Increasing the range of passive radar systems, operating on signals of telecommunications sources |
(Rus)
|
|
Rogozhnikov E., Velikanova E., Shipelgut A., Voroshilin E.
|
| 卷 8, 编号 3-4 (2014) |
Tribological characteristics of lubricating oil with nanodispersed phase |
(Rus)
|
|
Bolotov A., Novikov B., Novikova O., Rachishkin A., Gorlov D.
|
| 卷 8, 编号 3-4 (2014) |
Bending and oscillations of plates |
(Rus)
|
|
Kiyko I.
|
| 卷 8, 编号 3-4 (2014) |
Variational problem of economic dynamics model of Harrod-Domar with variable capital-output ratio of income gain consumption optimization |
(Rus)
|
|
Meerson A., Chernyaev A.
|
| 卷 8, 编号 3-4 (2014) |
Theory of plasticity without loading surface and associated flow law |
(Rus)
|
|
Bondar V.
|
| 卷 8, 编号 3-4 (2014) |
Flow of thin layer of plastically anisotropic material on face of elastic parallelepiped |
(Rus)
|
|
Bodunov M., Borodin I., Kiyko L.
|
| 卷 8, 编号 3-4 (2014) |
Identification of polyfunctional cyclic ketals |
(Rus)
|
|
Gnevasheva L., Gnevashev D.
|
| 卷 8, 编号 3-4 (2014) |
Review of methods to combat clutter in radar systems |
(Rus)
|
|
Velikanova E., Rogozhnikov E., Voroshilin E.
|
| 卷 8, 编号 3-4 (2014) |
Limit forming of fixed on the contour round steel plate in two-stage forming process using spherical punches of small radius |
(Rus)
|
|
Mikhaylova V., Sukhomlinov L.
|
| 卷 8, 编号 2-4 (2014) |
Research of magnetic oils’ structural stability for friction units |
(Rus)
|
|
Bolotov A., Novikov V., Novikova O., Gorlov I.
|
| 卷 8, 编号 2-4 (2014) |
Comparative analysis of standardized and finite-element approaches to strength calculations on example of assembly table |
(Rus)
|
|
Netrusov A.
|
| 卷 8, 编号 2-4 (2014) |
Solution of bifurcation problem for cylindrical shell under complex loading |
(Rus)
|
|
Okhlopkov N., Nigomatulin F.
|
| 卷 8, 编号 2-4 (2014) |
Model of effective dynamic viscosity of two-phase mixtures |
(Rus)
|
|
Kondratyev A., Shvydko P.
|
| 卷 8, 编号 2-4 (2014) |
Experimental research of metal creep on circular paths of loading |
(Rus)
|
|
Okhlopkov N., Garanikov V.
|
| 卷 8, 编号 2-4 (2014) |
Response of stationary gas turbine unit with rotor in plain bearings to seismic impact |
(Rus)
|
|
Temis M., Egorov A.
|
| 卷 8, 编号 2-4 (2014) |
Influence of gradient tensor shape in geometrically nonlinear endochronic theory of creep |
(Rus)
|
|
Kadashevich Y., Pomytkin S.
|
| 卷 8, 编号 2-4 (2014) |
Stability of three-layer cylindrical shell of composite material with orthotropic intermediate layer |
(Rus)
|
|
Mozgunov V., Serov M., Aleksandrova S., Zubarev A.
|
| 卷 8, 编号 2-4 (2014) |
Integration of Navier-Stokes equations |
(Rus)
|
|
Vyskrebtsov V.
|
| 卷 8, 编号 2-4 (2014) |
System of governing equations for calculation of shallow cylindrical panels |
(Rus)
|
|
Volodin V., Nadirov E.
|
| 卷 8, 编号 2-4 (2014) |
Linear minimax filtering of scalar random process at presence of fuzzy disturbance with limited variance in net component of observation |
(Rus)
|
|
Sidorov I.
|
| 卷 8, 编号 2-4 (2014) |
Climb in analytical calculation of spatial truss |
(Rus)
|
|
Kirsanov M.
|
| 卷 8, 编号 2-4 (2014) |
Problem of long-term high temperature strength of metal materials |
(Rus)
|
|
Arutyunyan R.
|
| 卷 4, 编号 1-4 (2014) |
Plate thickness’ distribution optimization problem in panel flutter case analysis |
(Rus)
|
|
Kudryavtsev B.
|
| 卷 4, 编号 1-4 (2014) |
Numerical simulation of the axisymmetric hydrolipoclasy of thin metal sheet, fixed on the contour |
(Rus)
|
|
Petrov V., Sukhomlinov L.
|
| 卷 4, 编号 1-4 (2014) |
Dissipation of energy in the interaction of an engineering object and base |
(Rus)
|
|
Rozhdestvenskiy Y.
|
| 卷 4, 编号 1-4 (2014) |
Scaling parameters and modeling flutter of a cylindrical shell |
(Rus)
|
|
Kiyko I., Pokazeev V.
|
| 卷 4, 编号 1-4 (2014) |
Quasi-static problem solution using Tomlinson’s model |
(Rus)
|
|
Popova T.
|
| 卷 4, 编号 1-4 (2014) |
Nonlinear oscillations of a three-layer and multi-layer plates and shells during periodic impacts (survey) |
(Rus)
|
|
Kogan E., Yurchenko A.
|
| 卷 4, 编号 1-4 (2014) |
Influence of pressure and temperature on thermal conductivity of limestone |
(Rus)
|
|
Ramazanova A., Magdiev A.
|
| 卷 4, 编号 1-4 (2014) |
The revised method of solving the contact problem for ring layer, taking into account the forces. Message 1. Mathematical model of contact interaction of ring layer with rigid base |
(Rus)
|
|
Bozhkova L., Noritsyna G., Ryabov V.
|
| 卷 4, 编号 1-4 (2014) |
Generalized method of definition of speed of restrained modal movement of gas bubbles, liquid droplets and solid particles of any form under the influence of gravity |
(Rus)
|
|
Kondratiev A.
|
| 卷 4, 编号 1-4 (2014) |
The generalized equation of relativistic quantum mechanics |
(Rus)
|
|
Ketsaris A., Kalpina N.
|
| 卷 4, 编号 1-4 (2014) |
Prediction of residual life based on the results of diagnosis of full-scale constructions and continuous monitoring of their technical condition |
(Rus)
|
|
Gusev A., Starodubtseva S., Shcherbakov V.
|
| 卷 4, 编号 1-4 (2014) |
Applied version of the theory of elastic-plastic processes, which takes into account the additional isotropic hardening |
(Rus)
|
|
Bondar V., Danshin V., Kostin A.
|
| 卷 4, 编号 1-4 (2014) |
Trigonometric probability distribution |
(Rus)
|
|
Ivashnev L.
|
| 卷 4, 编号 1-4 (2014) |
Comparative analysis of methods for calculating airlift units |
(Rus)
|
|
Alekseyev D., Sheypak A.
|
| 卷 4, 编号 1-4 (2014) |
Statistical characteristics of the coordinates of a point on the Earth's surface, when applied the combination of differential-ranging and dynamical methods on spacecraft |
(Rus)
|
|
Blokhina V., Popov P.
|
| 卷 4, 编号 1-4 (2014) |
Scaling when using weighted regression method |
(Rus)
|
|
Ivashnev L., Gorbacheva S.
|
| 卷 4, 编号 1-4 (2014) |
Extreme deformation of edge-fixed round steel plate under the action of a spherical punch which radius is much smaller than the radius of the plate |
(Rus)
|
|
Mikhaylova V., Sukhomlinov L.
|
| 卷 4, 编号 1-4 (2014) |
Endochronic plasticity theory, which takes into account the cross-linking, initial microstresses and initial microdeformations |
(Rus)
|
|
Kadashevich Y., Pomytkin S., Kryzhevich S.
|
| 卷 8, 编号 4-3 (2014) |
Evaluating the effectiveness of cell selection in lawns growing in high copper content in the environment |
(Rus)
|
|
Gladkov E., Dolgih Y., Gladkova O., Glushetskaya L.
|
| 卷 8, 编号 4-3 (2014) |
Centers of collective use of laboratory equipment: main tasks and their realization |
(Rus)
|
|
Moiseenko V., Kostenko A., Pozdnyakov Y., Krysanov K.
|
| 卷 8, 编号 4-3 (2014) |
Preventing the formation of scaling in the water cycle |
(Rus)
|
|
Kulikov M., Kozlov S., Bulatov M., Zyukov E.
|
| 卷 8, 编号 4-3 (2014) |
Integrated approach to the technical condition of the process equipment |
(Rus)
|
|
Paraev S., Kardashev G.
|
| 卷 8, 编号 4-3 (2014) |
Analytical method of determining the extreme positions of special mechanisms using software systems |
(Rus)
|
|
Ivanov V., Korenovskiy V., Mamaev A.
|
| 卷 8, 编号 4-3 (2014) |
Actual tasks intelligent lighting control |
(Rus)
|
|
Avanyan T., Zubov D., Paramonov E.
|
| 卷 8, 编号 4-3 (2014) |
Description of multicomponent rectification based on extended principle of maximum entropy |
(Rus)
|
|
Balunov A., Maikov V.
|
| 卷 8, 编号 4-3 (2014) |
The elemental and fractional composition of humic substances in sediments of lakes of the taiga zone of the Tyumen region |
(Rus)
|
|
Shigabaeva G.
|
| 卷 8, 编号 3-3 (2014) |
Process of production Аgrostis stolonifera l. plants, resistant to high concentrations of lead via cell engineering |
(Rus)
|
|
Gladkov E., Gladkova O., Glushetskaya L., Dolgikh Y.
|
| 卷 8, 编号 3-3 (2014) |
New fields of application of regenerative cooling-gas machines |
(Rus)
|
|
Porytchikov A., Krysanov K.
|
| 卷 8, 编号 3-3 (2014) |
Information system for calculating medical risk factors |
(Rus)
|
|
Safariants D., Sofiev A.
|
| 卷 8, 编号 3-3 (2014) |
Production management model on the principles of environmental safety and results of its testing |
(Rus)
|
|
Grafkina M., Stolbniakova E.
|
| 卷 8, 编号 3-3 (2014) |
Optimization of production of carbon black by using idealized model of the reactor |
(Rus)
|
|
Borovkov A., Tsygankov M.
|
| 卷 8, 编号 3-3 (2014) |
Universal algorithm of preparation of soil samples for determination of hazardous chemicals |
(Rus)
|
|
Latyshenko K., Mironov A., Pavluchenko I.
|
| 卷 8, 编号 3-3 (2014) |
Performance test results of mass transfer mesh combined contact device |
(Rus)
|
|
Trifonov V., Sidel'nikov I.
|
| 卷 8, 编号 3-3 (2014) |
Heat and mass transfer tests of minicircular nozzles of polymeric material |
(Rus)
|
|
Sokolov A., Pushnov A., Sidelnikov I., Tolstikov A., Kurbatova E.
|
| 卷 8, 编号 3-3 (2014) |
Stabilization system for illumination of the working area |
(Rus)
|
|
Paramonov E., Zubov D., Nevrov A.
|
| 卷 8, 编号 3-3 (2014) |
Working substances of high heat pumps. Current state of affair and development trends |
(Rus)
|
|
Malafeev I., Ilyin G., Krysanov K.
|
| 卷 8, 编号 3-3 (2014) |
Mathematical modeling of measuring transducers |
(Rus)
|
|
Golovin V., Latyshenko K.
|
| 卷 8, 编号 3-3 (2014) |
Methodology for determination of mass fraction of active substance in ultraand nano-dispersed metal fuels by combustion calorimetry |
(Rus)
|
|
Romanov P., Pavlovets G., Meleshko V., Romanova I., Zlatkina V., Kulikova T., Mikhaylovskaya L.
|
| 卷 8, 编号 3-3 (2014) |
Direction of modification of components for pyrotechnic low-gas compositions |
(Rus)
|
|
Romanov P., Burdikova T., Pavlovets G., Meleshko V., Romanova I., Tikhomirova M.
|
| 卷 8, 编号 3-3 (2014) |
Induction of carotenogenesis in the yeast of Phaffia rhodozyma strain Y2228 in formation of singlet oxygen in culture medium under the action of hydrogen peroxide |
(Rus)
|
|
Melnikova E., German L., Kramm E.
|
| 卷 8, 编号 3-3 (2014) |
Method for determination of kinetic parameters of oxidation of ground carbon materials |
(Rus)
|
|
Obvintseva N., Kaminskiy A., Epshteyn S.
|
| 卷 8, 编号 3-3 (2014) |
Influence of salinity on bioconcentration and genotoxicityof heavy metals for Asteria srubens L. sea stars |
(Rus)
|
|
Poromov A., Peretykin A., Smurov A.
|
| 卷 8, 编号 3-3 (2014) |
Determination of flow behavior index of polymer compositions |
(Rus)
|
|
Noskov S., Baranov D., Skopintsev I.
|
| 卷 8, 编号 3-3 (2014) |
E-learning systemfor teaching the management of hard alloy producing |
(Rus)
|
|
Kornienko I., Chistyakova T., Novozhylova I.
|
| 卷 8, 编号 3-3 (2014) |
Influence of velocity on separation efficiency of drops under partial condensation of vapor on tube bundle |
(Rus)
|
|
Zhikharev A., Mantrova Y.
|
| 卷 8, 编号 3-3 (2014) |
Mathematical modeling of regeneration of granular filter material from petroleum |
(Rus)
|
|
Ivanova A., Stanislavskaya Y., Bulatov M., Haddad J.
|
| 卷 8, 编号 2-3 (2014) |
Development of criteria for comparative analysis of chemical and petrochemical industries of Russia |
(Rus)
|
|
Kvasyuk A., Bessarabov A., Bel’kov V., Zubov D.
|
| 卷 8, 编号 2-3 (2014) |
Research of sludge respiratory activity of various biological treatment process |
(Rus)
|
|
Verigina E., Grachev V., Selivanonv A.
|
| 卷 8, 编号 2-3 (2014) |
Mixing devices with a complex law of agitators motion |
(Rus)
|
|
Torubarov N., Malyshev R.
|
| 卷 8, 编号 2-3 (2014) |
Energy efficiency of plastic waste recycling into hydrogen and other hydrocarbon production |
(Rus)
|
|
Latyshenko K., Garelina S.
|
| 卷 8, 编号 2-3 (2014) |
Wastewater treatment of oil products at car parks |
(Rus)
|
|
Sister V., Mitashova N., Koltsova E.
|
| 卷 8, 编号 2-3 (2014) |
Study of pump separator for gas-liquid mixture for sanitary compartment of space station |
(Rus)
|
|
Salnikov N., Bobe L., Nikolaykina N., Rykhlov N.
|
| 卷 8, 编号 2-3 (2014) |
Determination of values of the solution flow rate and temperature in carbon dioxide absorption process |
(Rus)
|
|
Gureev A., Pikulin Y.
|
| 卷 8, 编号 2-3 (2014) |
Influence of traffic emission on distribution of heavy metals and benzo(α)pyrene in water of recreational areas |
(Rus)
|
|
Sorokin A., Sotnikova E.
|
| 卷 8, 编号 2-3 (2014) |
Use of magnetic field effects to determine position of drilling tool for installation of underground utilities |
(Rus)
|
|
Babushkin V.
|
| 卷 8, 编号 2-3 (2014) |
Determination of optimal conditions for technology main waste processing titanium production |
(Rus)
|
|
Barsukov A., Vacal S., Karpovich E.
|
| 卷 8, 编号 2-3 (2014) |
Processes of minimal dissipation in thermodynamic and economic systems |
(Rus)
|
|
Tsyrlin A.
|
| 卷 8, 编号 2-3 (2014) |
Use of thin clients for operational planning process |
(Rus)
|
|
Vasiliev A., Zubov D., Krysanov P.
|
| 卷 8, 编号 2-3 (2014) |
Interference-suppressed contact conductivity meter with pulse contact transducer |
(Rus)
|
|
Golovin V., Latyshenko K.
|
| 卷 8, 编号 2-3 (2014) |
Correlation analysis of heavy metals in sediments |
(Rus)
|
|
Shigabaeva G., Akhtyrskaya E.
|
| 卷 8, 编号 2-3 (2014) |
Calculation of thermal regimes and forecasting of the molds for plastic injection molding |
(Rus)
|
|
Zyukov E., Bulatov M., Duvidzon V.
|
| 卷 8, 编号 2-3 (2014) |
Experimental study of plastics hardness |
(Rus)
|
|
Frolov V., Shcherbakov Y., Skachkov Y.
|
| 卷 8, 编号 2-3 (2014) |
Development of information technology and computer quality management for inorganic acids of high purity |
(Rus)
|
|
Bessarabov A., Trynkina L., Kazakov A., Trokhin V.
|
| 卷 8, 编号 2-3 (2014) |
Environmental aspects of commercial transport transfer to higher fuel standards in Moscow |
(Rus)
|
|
Grafkina M., Sotnikova E., Sviridova E., Shirokova A., Fedorina A.
|
| 卷 8, 编号 2-3 (2014) |
Isolation of butanol from an aqueous solution |
(Rus)
|
|
Gharibyan T.
|
| 卷 8, 编号 2-3 (2014) |
Algorithm for determination of illumination intensity of solar panels of the Russian segment of the International Space Station |
(Rus)
|
|
Sazonov V.
|
| 卷 8, 编号 2-3 (2014) |
Study of energy parameters of abiotic environment in near-field low-frequency electromagnetic field source zone |
(Rus)
|
|
Grafkina M., Nyunin B., Sviridova E.
|
| 卷 8, 编号 1-3 (2014) |
Study of changes in properties of urban waste water sediments at natural drying sites |
(Rus)
|
|
Verigina E.
|
| 卷 8, 编号 1-3 (2014) |
Features of metrological support for photocolorimetric gas analyzers |
(Rus)
|
|
Sviryukova O.
|
| 卷 8, 编号 1-3 (2014) |
Change of running efficiency of chemical equipment during operation |
(Rus)
|
|
Toporov A., Parfenyuk A.
|
| 卷 8, 编号 1-3 (2014) |
Development and investigation of refrigerating machine with dosage filling ammonia |
(Rus)
|
|
Krivtsov D., Porutchikov A.
|
| 卷 8, 编号 1-3 (2014) |
Effect of atmosphere composition changes on working conditions |
(Rus)
|
|
Kudgh S., Trubitsin A., Kotel’nikov S.
|
| 卷 8, 编号 1-3 (2014) |
Traffic jams in conditions of megapolis |
(Rus)
|
|
Vladimirov S.
|
| 卷 8, 编号 1-3 (2014) |
Method of intracyclic regulation of kinematic parameters of a linkage mechanism |
(Rus)
|
|
Ivanov V., Brovkina Y.
|
| 卷 8, 编号 1-3 (2014) |
Steam separation by partial condensation on tube bundle with a minimum degree of condensation |
(Rus)
|
|
Zhikharev A.
|
| 卷 8, 编号 1-3 (2014) |
Method of plastics endurance testing |
(Rus)
|
|
Shcherbakov Y., Frolov V.
|
| 卷 8, 编号 1-3 (2014) |
Preparation of multilayer food packaging waste for processing to secondary materials |
(Rus)
|
|
Nikolaykina N., Mayusan O., Salnikov N.
|
| 卷 8, 编号 1-3 (2014) |
Use of potential of negative temperatures of ambient air in cold-storage systems |
(Rus)
|
|
Marinyuk B., Serenov I., Ugolnikova M.
|
| 卷 8, 编号 1-3 (2014) |
Use of flocculants to improve environmental safety of water circuit of coal preparation plants |
(Rus)
|
|
Konovalova T., Veksler G., Lavrinenko A., Golberg G.
|
| 卷 8, 编号 1-3 (2014) |
Treatment of body painting wastewater at automotive plant |
(Rus)
|
|
Sister V., Mitashova N., Rogacheva V., Bashkatova I.
|
| 卷 8, 编号 1-3 (2014) |
Determination of quality of wastewater containing surfactants |
(Rus)
|
|
Volkov V., Mitashova N., Ageev A.
|
| 卷 8, 编号 1-3 (2014) |
Development of new lubricate compositions increasing reliability of firefighting equipment |
(Rus)
|
|
Kiselev V., Zarubin V., Nikitina S., Pokrovskiy A.
|
| 卷 8, 编号 1-3 (2014) |
Improving of motor vehicles performance through use of high-performance additives |
(Rus)
|
|
Zarubin V., Kiselev V., Puchkov P., Toporov A.
|
| 卷 8, 编号 1-3 (2014) |
Computer analysis of unsteady creeping of construction rod elements |
(Rus)
|
|
Lugantsev L.
|
| 卷 8, 编号 1-3 (2014) |
Plasma-chemical reactor for production of hydrogen from polymer waste |
(Rus)
|
|
Latyshenko K., Garelina S.
|
| 卷 8, 编号 4-2 (2014) |
Wear-resistant coatings and their use for improvement of cutting tool performance |
(Rus)
|
|
Maximov E.
|
| 卷 8, 编号 4-2 (2014) |
Improvement of technology of manufacturing "body pump" parts of EPAN composite material reinforced by nanoscale carbon fibers |
(Rus)
|
|
Kostikov V., Eremeeva Z., Nitkin N., Sharipzyanova G., Slyuta D.
|
| 卷 8, 编号 4-2 (2014) |
Structure and wear resistance of carbide-containing multilayer coating after oxyacetylene welding |
(Rus)
|
|
Parkin A., Zhatkin S., Minakov E., Semin A.
|
| 卷 8, 编号 4-2 (2014) |
Machining of square seats in thrust bearings separators for helicopters using CNC machine |
(Rus)
|
|
Pini B., Popov A.
|
| 卷 8, 编号 4-2 (2014) |
Influence of change of speed of deformation on nature of hardening of material |
(Rus)
|
|
Kiselyov D., Tipalin S., Shpunkin N., Tipalina A.
|
| 卷 8, 编号 4-2 (2014) |
Research of distribution of plastic deformation on thickness of steel strips |
(Rus)
|
|
Aldunin A., Shumeev A.
|
| 卷 8, 编号 4-2 (2014) |
Determination of optimal method of making of small diameter deep holes in parts of gas-turbine engine and its experimental study |
(Rus)
|
|
Kratyuk N.
|
| 卷 8, 编号 4-2 (2014) |
Counting approaches to determination of force function argument |
(Rus)
|
|
Maximov Y., Ankin A., Chebyshev A.
|
| 卷 8, 编号 3-2 (2014) |
Features of high-speed milling machining |
(Rus)
|
|
Olenin L., Ochkin D.
|
| 卷 8, 编号 3-2 (2014) |
Natural-model tests of materials and coatings in simulated intense radiant and convective heat transfer of elements of heat and power equipment. Part 2: Physical and technical characteristics of thermal stand for testing of materials and coatings of diesel engine thermally insulated combustion chamber |
(Rus)
|
|
Merzlikin V., Maximov A., Tovstonog V., Chirin K., Abdulmyanov R.
|
| 卷 8, 编号 3-2 (2014) |
Fractal analysis of surface profile of machine parts using measuring device MarSurf XR20 |
(Rus)
|
|
Bavykin O., Plaksin S., Vycheslavova O.
|
| 卷 8, 编号 3-2 (2014) |
Kinematic analysis of cam-gear-lever mechanism with elastic element in connecting rod |
(Rus)
|
|
Balabina T., Mamaev A.
|
| 卷 8, 编号 3-2 (2014) |
Study of stress-strain state of mill roller drive elements |
(Rus)
|
|
Ivochkin M., Gurevich Y., Dimitryuk S.
|
| 卷 8, 编号 2-2 (2014) |
Improvement of multi-dimensional processing efficiency by layout optimization of multi-axis machine tools |
(Rus)
|
|
Lukina S., Ivannikov S., Manaenkov I.
|
| 卷 8, 编号 2-2 (2014) |
Efficiency improvement for hard alloy tools for cutting heavy-duty materials |
(Rus)
|
|
Tverdokhlebov A., Maximov Y., Vereshchaka A.
|
| 卷 8, 编号 2-2 (2014) |
Features of metal matrix composite material hardening with implementation of small amounts of nano-sized reinforcing additives |
(Rus)
|
|
Eremeeva Z., Lopatin V., Simonova E.
|
| 卷 8, 编号 2-2 (2014) |
Contactless copying H2C interface for controlling an anthropomorphic robot |
(Rus)
|
|
Idiatullov T., Romantsov N., Chabanenko E.
|
| 卷 8, 编号 2-2 (2014) |
Optimization of combined cutting and surface plastic deformation |
(Rus)
|
|
Pini B., Vetrova E., Maximov Y.
|
| 卷 8, 编号 2-2 (2014) |
Influence of carbide phase distribution on deterioration of composite coating WOKA PTA-6040 after plasma powder surfacing |
(Rus)
|
|
Parkin A., Zhatkin S., Minakov E.
|
| 卷 8, 编号 2-2 (2014) |
Development of flow forming cutting of cylindrical wheels |
(Rus)
|
|
Kalashnikov A., Morgunov Y., Kalashnikov P., Kotkina T.
|
| 卷 8, 编号 2-2 (2014) |
Peculiarities of broaching holes using tool with regular microrelief |
(Rus)
|
|
Koltunov I., Lobanov A.
|
| 卷 8, 编号 2-2 (2014) |
Modern technologies in educational process and production |
(Rus)
|
|
Maximov Y., Kuzminsky D.
|
| 卷 8, 编号 2-2 (2014) |
Directed surface plastic deformation in the system of control of pneumatic hydro-aggregates precision part shape |
(Rus)
|
|
Kuritsyna V., Martynyuk A., Grachev M.
|
| 卷 8, 编号 2-2 (2014) |
Full-scale-model tests of materials and coatings at simulation of intense radiation and convective heat transfer of heat power equipment elements |
(Rus)
|
|
Merzlikin V., Maximov A., Tovstonog V., Krokhalev I.
|
| 卷 8, 编号 2-2 (2014) |
Hardening of chromium steels in vacuum |
(Rus)
|
|
Ovsyannikov B., Vasilevsky V., Kulomzin E.
|
| 卷 8, 编号 2-2 (2014) |
Algorithm of minimization of tool idle movements during milling of complex surfaces on 3-axis CNC machines |
(Rus)
|
|
Ponomarev B., Nguen V.
|
| 卷 8, 编号 2-2 (2014) |
Self-centering of moving strip along unit axis |
(Rus)
|
|
Volshonok I., Rusakov A., Trayno A.
|
| 卷 8, 编号 2-2 (2014) |
Determination of properties of sheet damping material with viscoelastic coupling layer during shear deformation |
(Rus)
|
|
Tipalin S., Shpunkin N., Saprykin B.
|
| 卷 8, 编号 2-2 (2014) |
Physico-chemical method for hardening of parts of titanium alloys |
(Rus)
|
|
Shandrov B., Philippov V., Khomyakova N.
|
| 卷 8, 编号 2-2 (2014) |
Design of geometrically-complex tools based on Boolean algebra |
(Rus)
|
|
Emelianov P., Maximov Y.
|
| 751 - 900 的 2404 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
