| Edição |
Título |
Arquivo |
| Nº 12 (2023) |
Optical control of degradation of polytetrafluoroethylene films and its modification under electron irradiation |
(Rus)
|
|
Vazirova E., Abashev R., Milman I., Surdo A.
|
| Nº 11 (2023) |
Experience in the use of a roller multi-element phased array transducer for estimating the thickness of the pipeline wall |
(Rus)
|
|
Kattasheva A., Vagapov R., Ridel I., Kirpichenko D., Manihin O.
|
| Nº 12 (2023) |
Experience in the development and application of metal detectors for medical purposes |
(Rus)
|
|
Reutov Y., Pudov V.
|
| Nº 9 (2024) |
Characteristic of the changes in magnetic properties of heat-treated steel at the early stages of cold plastic deformation by tensile strain |
(Rus)
|
|
Matosyan A., Nichipuruk A., Stashkov A., Sazhina E., Gordeev N., Afanasiev S.
|
| Nº 12 (2024) |
Features of Planar Localization of Acoustic Emission Sources via the Inglada’s Triangulation Algorithm |
|
|
Matvienko Y., Vasiliev I., Balandin T., Chernov D.
|
| Nº 1 (2024) |
Features of application of adaptive interferometric fiber sensors of acoustic emission to monitor the condition of polymer composite materials |
(Rus)
|
|
Romashko R., Bashkov O., Efimov T., Bezruk M., Bobruyko D., Makarova N.
|
| Nº 7 (2025) |
Features of polytetrafluoroethylene application in high-dose dosimetry of accelerated protons by the method of electron paramagnetic resonance |
|
|
Vazirova E., Sarychev M., Artemov M., Milman I., Surdo A., Αbashev R.
|
| Nº 9 (2025) |
APPLICATION FEATURES OF GOST ISO 11666 “ULTRASONIC ACCEPTANCE LEVELS” REQUIREMENTS IN THE PRACTICE WELDED JOINTS CONTROL |
|
|
Konshina V., Nikolaev V., Tsomuk S.
|
| Nº 8 (2024) |
Development of calibration samples made of steel 45 and 09G2S for eddy current structuroscope by carburizing |
(Rus)
|
|
Byzov A., Vasilenko O., Ksenofontov D., Minin M., Weinstein I.
|
| Nº 9 (2023) |
Features of propagation of lateral transverse ultrasonic wave in a flat layer of material |
(Rus)
|
|
Shevaldykin V., Samokrutov A.
|
| Nº 11 (2023) |
Assessment of the influence of interfering factors on the measurement of the depth of surface cracks of rails during manual eddy current control |
(Rus)
|
|
Shlyakhtenkov S., Becher S.
|
| Nº 5 (2024) |
Estimation of the time resistance of steel by the parameters of the harmonic spectrum of the remagnetization curve |
(Rus)
|
|
Sokolov R., Muratov K.
|
| Nº 7 (2025) |
ESTIMATION OF THE DEFORMATION STABILITY OF THE PHASE COMPOSITION OF AUSTENITIC-FERRITIC CLADDINGS MADE OF POWDER WIRES |
|
|
Lapin M., Mushnikov A., Soboleva N.
|
| Nº 12 (2024) |
Assessment of Stress-Strain State of Pipelines Based on the Measurements of Magnetic Characteristics in Field Conditions |
|
|
Myznov K., Vasilenko O., Kostin V., Tronza V., Bondina A., Kukushkin S., Tryakina N., Salomatin A.
|
| Nº 4 (2025) |
Evaluation of the Non-Uniformity of Acoustic and Elastic Properties of Compression Coil Springs |
|
|
Muraveva O., Murav’ev V., Shikharev P., Belosludtsev K.
|
| Nº 7 (2023) |
Estimation of the segregation in a high carbon cast steel by thermoelectric power means |
(Rus)
|
|
Hernandez L., Carreon H., Bedolla A.
|
| Nº 11 (2025) |
ASSESSMENT OF THE ACTUAL DIMENSIONS OF REFLECTORS BASED ON THEIR ACOUSTIC IMAGES |
|
|
Meleshko N., Ivanchenko K., Zhukov A.
|
| Nº 8 (2024) |
Evaluating efficiency of foreign object detection technology based on the use of passive infrared thermography |
(Rus)
|
|
Yang H., Yan Y., Liu X., Wang H., Hou Y., Vavilov V.
|
| Nº 6 (2024) |
PARALLEL IMAGE RECONSTRUCTION USING THE MAXIMUM LIKELIHOOD METHOD USING A GRAPHICS PROCESSOR AND THE OpenGL LIBRARY |
(Rus)
|
|
Zolotarev C., Taruat A.
|
| Nº 12 (2023) |
Parametric study of anomaly detection models for defect detection in infrared thermography |
(Rus)
|
|
Vesala G., Ghali V., Naga prasanthi Y., Suresh B.
|
| Nº 7 (2025) |
PRIMARY SENSING ELEMENT OF A DIFFERENTIAL MAGNETIC STRUCTUROSCOPE FOR MEASURING RESIDUAL AUSTENITE IN FERROMAGNETIC STEELS |
|
|
Gordeev N., Stashkov A.
|
| Nº 9 (2023) |
Improvement of tfm-image quality due to correction of “parasitic” delays between antenna array elements |
(Rus)
|
|
Bazulin E.
|
| Nº 8 (2023) |
Increasing the structural sensitivity of the residual magnetization and coercive force of steels |
(Rus)
|
|
Sandomirski S.
|
| Nº 11 (2025) |
IMPROVING THE ACCURACY OF MEASURING THE PARAMETERS OF FREQUENCY-DEPENDENT ATTENUATION OF A LONGITUDINAL ULTRASONIC WAVE IN SOLIDS |
|
|
Bazulin E., Dolgova E.
|
| Nº 12 (2024) |
Improving the Efficiency of Defect Image Identification During Computer Decoding of Digital Radiographic Images of Welded Joints of Hazardous Production Facilities |
|
|
Grigorchenko S., Kapustin V.
|
| Nº 6 (2025) |
MATCHED FILTER BASED POST PROCESSING APPROACH FOR ACTIVE INFRARED THERMOGRAPHY FOR NON-DESTRUCTIVE TESTING AND EVALUATION OF CARBON FIBRE REINFORCED POLYMER MATERIALS |
|
|
Bhambhu S., Arora V., Mulaveesala R.
|
| Nº 2 (2025) |
Does Bead Roughness Interfere with Ultrasonic Testing of Welds of Limited Thickness? |
|
|
Mogilner L.
|
| Nº 7 (2025) |
APPLICATION OF EDDY CURRENT METHOD OF CONTROL FOR INDICATION OF FATIGUE CHANGES IN AUSTENITIC STEELS WITH MARTENSITE FORMATION |
|
|
Kuskov K., Sokolov R., Muratov K.
|
| Nº 12 (2024) |
Application of Pulse Gas-Discharge Electroacoustic Transducer for Non-Destructive Testing |
|
|
Derusova D., Nekhoroshev V., Shpilnoy V., Raut A.
|
| Nº 1 (2024) |
Application of laser scanning thermography and regression analysis to determine characteristics of defects in polymer composite materials |
(Rus)
|
|
Divin A., Ponomarev S., Mishchenko S., Zakharov Y., Karpova N., Samodurov A., Golovin D., Tyurin A.
|
| Nº 8 (2025) |
APPLICATION OF LINEAR REGRESSION MODELS FOR FINDING THE HARDNESS OF HEAT-TREATED STEELS BASED ON STATIC MAGNETIC CHARACTERISTICS |
|
|
Besprozvanny A., Ksenofontov D., Vasilenko O.
|
| Nº 9 (2023) |
Application of the acoustic emission method for ranking by fatigue damage of the material of trunnions of drying cylinders of cardboard and paper-making machines |
(Rus)
|
|
Rastegaev I., Khrustalev A., Danyuk A., Afanas'yev M., Merson D., Sevast'yanov D., Melent'ev S., Plyusnin A.
|
| Nº 10 (2023) |
Application of acoustic emission and digital image correlation for detecting diffusion interlayers in dissimilar welded joints |
(Rus)
|
|
Barat V., Marchenkov A., Poroykov A., Karpova M., Bardakov V.
|
| Nº 5 (2025) |
Application of acoustic emission and vibration diagnostics methods in compression testing of composite specimens |
|
|
Matvienko Y., Vasiliev I., Fursov V.
|
| Nº 10 (2025) |
APPLICATION OF THE JILES–ATHERTON MODEL OF MAGNETIC HYSTERESIS TO ANALYZE THE SPATIAL DISTRIBUTION OF MAGNETIC FIELDS AND INDUCTION IN AN OPEN MAGNETIC CIRCUIT |
|
|
Batueva A., Vasilenko O.
|
| Nº 1 (2025) |
Application of neural networks for control of printed circuit boards using 3D x-ray microtomography data |
|
|
Syryamkin V., Klassen F., Bertsun A.
|
| Nº 6 (2023) |
Application of the parameters of the remagnetization curve`s spectral characteristics to determine the hardness of ferromagnetic material |
(Rus)
|
|
Sokolov R., Muratov K., Novikov V.
|
| Nº 1 (2025) |
The use of periodic laser heating and phase sensitive thermography to evaluation the thickness of coatings |
|
|
Divin A., Zakharov Y., Golovin D., Karpova N., Tyurin A., Samodurov A., Karpov S., Rodaev V., Zakharov I.
|
| Nº 12 (2025) |
APPLICABILITY OF MAGNETIC MEASUREMENTS TO THE DETECTION OF FRACTURE NUCLEATION IN 09G2S STEEL |
|
|
Khudorozhkova Y., Povolotskaya A., Burov S., Vichuzhanin D.
|
| Nº 5 (2025) |
Application of texture filtering in clustering of x-ray computed tomography data of products from polymer composite materials |
|
|
Shirshin A., Fedorov A., Zheleznyak I., Peleshok S.
|
| Nº 12 (2024) |
Application of CF and DMAS Technology to Improve the Quality of Reflector Images Reconstructed from Echoes Measured by an Antenna Array |
|
|
Bazulin E.
|
| Nº 4 (2023) |
Multiple damage prediction in tubular rectangular beam model using frequency response-based mode shape curvature with back-propagation neural network |
(Rus)
|
|
Gupta S., Das S.
|
| Nº 12 (2025) |
DIRECT PROBLEM OF MAGNETOSTATICS FOR A UNIFORMLY MAGNETIZED CYLINDER |
|
|
Dyakin V., Kudryashova O., Rayevskii V.
|
| Nº 4 (2024) |
Application progress and prospect of defect detection technology for timber structure members |
(Rus)
|
|
Zhao K., Ge Z., Huo L., Gao Y., Zhou Y., Yao Z.
|
| Nº 9 (2023) |
Development of the algorithm for the movement of the measuring module of the system of automated non-destructive testing of the nozzle of a lpre |
(Rus)
|
|
Malyy V., Kostyukhin A., Fedorov A., Kinzhagulov I.
|
| Nº 9 (2023) |
Development of a sensor layout for a dynamic indentation device |
(Rus)
|
|
Kolganov O., Khoshev A., Egorov R., Fedorov A., Lukyanov G., Konyashov V.
|
| Nº 10 (2023) |
Development of a technique for applying pa and tofd methods for mechanized ultrasonic testing of welded joints of main pipelines using the USD-60FR-16/128 flaw detector |
(Rus)
|
|
Ajibaye D., Savichev M., Atroshenko V.
|
| Nº 3 (2025) |
Development of Methods for Shell and Fuel Layer Characterization of Indirect-Drive Cryogenic Target for Laser Thermonuclear Fusion |
|
|
Zarubina E., Rogozhina M., Solomatina E., Chugrov .
|
| Nº 1 (2023) |
Development of methods and devices for air-coupled ultrasonic through transmission testing of large-sized objects made of polymer composite materials |
(Rus)
|
|
Kachanov V., Sokolov I., Karavaev M., Minaev D.
|
| Nº 6 (2023) |
Development of approaches to real-time optical diagnostics for laser weld formation process using laser emission spectroscopy |
(Rus)
|
|
Maslov N., Konstantinov S., Malikov A.
|
| Nº 8 (2024) |
Development of a method for assessing the degree of hydrogenation of titanium alloy VT1-0 by acoustic method |
(Rus)
|
|
Khlybov A., Uglov A., Ryabov D.
|
| Nº 9 (2023) |
Development of an empirical model for damage degree assessment of steel specimens based on the results of acoustic emission signal flow statistical processing |
(Rus)
|
|
Marchenkov A., Vasiliev I., Chernov D., Zhgut D., Pankina A., Kovaleva T., Kulikova E.
|
| Nº 6 (2025) |
REFLECTOR TYPE RECOGNITION USING NEURAL NETWORK BASED ON TOFD ECHOES |
|
|
Bazulin E., Medvedev L.
|
| Nº 5 (2024) |
Calculation of the DAC curve for images reconstructed by digital aperture focusing method |
(Rus)
|
|
Bazulin A., Bazulin E., Vopilkin A., Korolev S., Romashkin S., Tikhonov D.
|
| Nº 9 (2025) |
CALCULATION OF THE INFLUENCE OF ADHESIVE PROPERTIES OF THE COUPLANT ON THE ACOUSTIC FIELD |
|
|
Michurov A., Sokolkin A.
|
| Nº 3 (2024) |
Calculation of the magnetic field strength inside and outside of an infinite cylinder placed in an arbitrary external field |
(Rus)
|
|
Dyakin V., Kudryaschova O., Raevskii V.
|
| Nº 5 (2023) |
Calculation of the magnetic field strength from a semi-infinite cylinder placed in an arbitrary external field |
(Rus)
|
|
Dyakin V., Kudryaschova O., Raevskii V.
|
| Nº 12 (2025) |
ULTRASONIC IMAGING VIA DIGITAL ANTENNA FOCUSING TECHNIQUE USING HIGH-FREQUENCY LAMB WAVES |
|
|
Dolmatov D., Смолянский V., Tsyplakov M., Kashkarov E.
|
| Nº 5 (2024) |
Amplitude reconstruction of acoustic emission signals on the base of its mathematical modeling as a stochastic process |
(Rus)
|
|
Berkovich V., Builo S., Builo B.
|
| Nº 2 (2023) |
Solution of the inverse problem definition surfaces at electron beam additive manufacturing |
(Rus)
|
|
Trushnikov D., Krotova E., Starikov S., Musikhin N., Varushkin S., Matveev E.
|
| Nº 11 (2024) |
Data fusion of ultrasonic and thermal nondestructive testing of metal-polymer composite |
(Rus)
|
|
Dolmatov D., Chulkov A., Nesteruk D., Kashkarov E., Vavilov V.
|
| Nº 3 (2024) |
Applying data fusion procedures to evaluation of impact damage in carbon fiber reinforced plastic by using optical infrared thermography and laser vibrometry techniques |
(Rus)
|
|
Shpilnoi V., Derusova D., Vavilov V.
|
| Nº 8 (2024) |
Laered composite hydrogenated films of zirconium and niobium: method of production and control of properties by thermopower method |
(Rus)
|
|
Larionov V., Laptev R., Lider A.
|
| Nº 2 (2024) |
Modern trends in the application of thermoelectric method in non-destructive testing (review) |
(Rus)
|
|
Soldatov A., Soldatov A., Kostina M.
|
| Nº 10 (2025) |
COMPARISON OF THE SENSITIVITY OF MAGNETIC PARAMETERS TO PLASTIC TENSION OF 20GN AND 08Kh15N5D2T STEELS |
|
|
Povolotskaya A., Kostin V., Mushnikov A., Perov V.
|
| Nº 12 (2025) |
SPECKLE INTERFEROMETRY FOR RECORDING MICRO-DISPLACEMENTS AND DEFORMATIONS: OVERVIEW OF METHODS |
|
|
Kravchenko M., Zavyalov P., Zhimuleva E.
|
| Nº 9 (2024) |
Comparison of methods for changing the spectrum of radiation of a pulse x-ray source to determine the most effective two-energy image processing |
(Rus)
|
|
Komarskiy A., Korzhenevskiy S., Ponomarev A., Chepusov A., Krinitzin V., Krasniy O.
|
| Nº 8 (2025) |
COMPARATIVE SENSITIVITY OF THE ACOUSTIC TECHNIQUE TESTING TO INTERNAL DEFECTS OF ROLLED PRODUCT USING LONGITUDINAL AND TRANSVERSE WAVES |
|
|
Murav’ev V., Vladykin A.
|
| Nº 10 (2023) |
Comparative tests of mechanical characteristics and structure of basic and engineering plastic filaments for additive manufacturing |
(Rus)
|
|
Abramova T., Bekher S.
|
| Nº 7 (2024) |
Compαrαtive chαrαcteristics of luminescent detector mαteriαls bαsed on α-Αl2O3-δ for neutron dosimetry |
(Rus)
|
|
Αbashev R., Boyarincev Α., Milman I., Petrakovich Α., Surdo Α.
|
| Nº 8 (2023) |
Comparative analysis of acoustic anisotropy of pipes and sheets using SH- and tH-waves |
(Rus)
|
|
Volkova L., Murav'eva O., Kolpakov K.
|
| Nº 10 (2024) |
Comparative Analysis of Experimental Methods for Determining the Curie Temperature of Ferrite Materials |
(Rus)
|
|
Bobuyok S., Surzhikov A., Nikolaev E., Malyshev A., Lysenko E.
|
| Nº 11 (2023) |
Tangential eddy current probe for testing of soldered joints of busbars in electrical machines |
(Rus)
|
|
Gorbunov A., Ivkin A., Solomenchuk P.
|
| Nº 10 (2023) |
Theoretical investigations of temperature compensation of the results of the diagnosis of polymer composites by the method of two optical fiber |
(Rus)
|
|
Fedotov M.
|
| Nº 9 (2024) |
Thermal testing of corundum ceramics: pulse heating and optimized data processing algorithms |
(Rus)
|
|
Chernykh S., Vavilov V., Kostin V., Komolikov Y., Kladov D.
|
| Nº 7 (2024) |
Thermal testing of corundum ceramics: Classical techniques for optical heating |
(Rus)
|
|
Chernykh S., Vavilov V., Kostin V., Komolikov Y., Kladov D.
|
| Nº 9 (2023) |
Thermal testing of corundum ceramic plates |
(Rus)
|
|
Chernykh S., Kostin V., Komolikov Y.
|
| Nº 4 (2025) |
Infrared Thermal Imaging Detection and Image Segmentation of Micro-Crack Defects in Semiconductor Silicon Wafer Scanned by Laser |
|
|
Tang Q., Fang B., Gu Z., Vavilov V., Chulkov A., Xu G., Wang Z., Bu H.
|
| Nº 5 (2024) |
Thermal nondestructive testing of cracks in turbine blades by using ultrasonic stimulation |
(Rus)
|
|
Chulkov A., Vavilov V., Zhukov O.
|
| Nº 6 (2023) |
Thermal nondestructive testing: traditional approaches and novel trends (review) |
(Rus)
|
|
Vavilov V.
|
| Nº 3 (2025) |
Terahertz Detection and Evaluation of Thermal Barrier Coating Thickness |
|
|
Han B., Li J., He Q., Zhang Z., Zhao Y., Wang H.
|
| Nº 6 (2024) |
TECHNIQUE FOR AUTOMATIC GRADUATION AND VERIFICATION OF TWO-PARAMETER EDDY-CURRENT THICKNESS GAUGES OF DIELECTRIC COATINGS |
(Rus)
|
|
Syasko M., Soloviev I., Solomenchuk P.
|
| Nº 2 (2023) |
Ultrasonic inspection technology of welded joints obtained by spot friction welding |
(Rus)
|
|
Borovkov A., Prokhorovich V., Bychenok V., Berkutov I., Alifanova I.
|
| Nº 3 (2023) |
Three-dimensional tomography of scattering inhomogeneities by a cylindrical multistatic probing system |
(Rus)
|
|
Sukhanov D., Khalil A.
|
| Nº 11 (2025) |
THREE-DIMENSIONAL MODELLING OF VISIBLE RADIATION PROPAGATION THROUGH CRYOGENIC TARGET WITH HARMONIC PERTURBATIONS OF SHELL AND SOLID FUEL LAYER |
|
|
Zarubina E., Rogozhina M., Chugrov I.
|
| Nº 9 (2025) |
THREE-DIMENSIONAL POSITIONING OF INTERNAL VOLUMETRIC DEFECTS IN SOLID MATERIALS BASED ON ACOUSTIC-ELECTRIC TRANSFORMATIONS |
|
|
Luo J., Bespalko A., Utsyn G.
|
| Nº 2 (2025) |
Enhancing Deep Hole Defects' Visibility in Ultrasonic Detection for Thick-Walled Polyethylene Pipes via Time-Frequency Energy Concentration |
|
|
Chen C., Hou H., Zhang S., Su M., Zhao Z., Jiao C.
|
| Nº 10 (2023) |
Ultrasound tomography based on the coefficient inverse problem as a way to combat structural noise |
(Rus)
|
|
Bazulin E., Goncharsky A., Romanov S., Seryozhnikov S.
|
| Nº 5 (2023) |
Ultrasonic tomography using sparse antenna arrays and frequency domain post-processing |
(Rus)
|
|
Dolmatov D., Khairullin A., Smolyanskiy V.
|
| Nº 8 (2023) |
Ultrasonic adhesion control of special coatings |
(Rus)
|
|
Bychenok V., Khizhnyak S., Sorokin A., Simonenko A., Berkutov I., Alifanova I., Shmakov A., Dyachkovsky E.
|
| Nº 3 (2025) |
Ultrasonic Testing of Acoustic and Elastic Properties of 12Cr18Ni10Ti Steel Irradiated with Fast Electrons |
|
|
Vasiliev A., Biryukov D., Kostin V., Zatsepin A.
|
| Nº 7 (2025) |
ULTRASONIC TESTING OF KAPROLON BY ECHO METHOD |
|
|
Platunov A., Korepanov P.
|
| Nº 1 (2023) |
Ultrasonic testing of butt joints in electrotechnical steel plates using Lamb waves |
(Rus)
|
|
Vasil'ev A., Biryukov D., Zatsepin A.
|
| Nº 8 (2023) |
Low-velocity impact damage detection in cfrp laminates based on ultrasonic phased-array ndt technique |
(Rus)
|
|
Zou X., Gao W., Liu G.
|
| Nº 10 (2023) |
Ultrasonic testing through a thickened cladding |
(Rus)
|
|
Mikhaylov I., Razygraev A., Razygraev N.
|
| Nº 11 (2024) |
Research on ultrasonic synchronous detection method for material residual stress and thickness |
(Rus)
|
|
Zhao W., Zhou B., Bai W., Wang Z.
|
| Nº 2 (2023) |
Taking into account the stiffness of steel ropes when evaluating their tension force based on the results of measuring the natural frequency of oscillations |
(Rus)
|
|
Muratov K., Novikov V., Kulak S., Sokolov R., Safargaliev R., Musikhin S., Probotyuk V.
|
| Nº 8 (2023) |
A circular eddy current probe using miniature fluxgates for multi-orientation slit evaluation in steel components |
(Rus)
|
|
Saari M., Nadzri N., Zaini M., Sulaiman M., Kiwa T.
|
| Nº 8 (2023) |
Digital equipment and algorithms for determining the basic parameters of piezoelectric elements in pulsed excitation mode |
(Rus)
|
|
Ivanov N., Kondakov E., Miloslavsky Y.
|
| Nº 2 (2024) |
Experimental study of ultrasonic wave propagation in a long waveguide sensor for fluid-level sensing |
(Rus)
|
|
Kumar A., Periyannan S.
|
| Nº 11 (2023) |
Experimental studies of changes in the acoustic properties of spheroplastics |
(Rus)
|
|
Bychenok V., Seryi P., Firyulin D., Kinzhagulov I., Berkutov I., Alifanova I.
|
| Nº 10 (2024) |
Experimental Investigation on the Inspection of Cracks on Threaded Surfaces Using Electromagnetic Thermography |
(Rus)
|
|
Zhang Y., Xu C., Liu P., Liu R., Zhao Q., Wang L., Xie J.
|
| Nº 9 (2023) |
Electromagnetic scanner of structurally heterogeneous media |
(Rus)
|
|
Miroshnikov V., Grechishkina N.
|
| Nº 7 (2025) |
ELECTRONIC PARAMAGNETIC RESONANCE AND THERMOLUMINESCENCE OF POLYTETRAFLUOROETHYLENE FOR CONTROL OF RADIATION TECHNOLOGIES |
|
|
Vazirova E., Artemov M., Milman I., Surdo A., Αbashev R.
|
| Nº 10 (2023) |
Electrochemical realkalisation of carbonated cementitious matrix: characterization research to influence of time and current density |
(Rus)
|
|
Rachadel A., Mazer W.
|
| Nº 7 (2023) |
Efficiency of using different types of infrared imagers in active thermal nondestructive testing of delaminations in non-metals |
(Rus)
|
|
Kladov D., Chulkov A., Vavilov V., Stasevskiy V., Yurkina V.
|
| 151 - 256 de 256 resultados |
<< < 1 2 |
