| 期 |
标题 |
文件 |
| 卷 6, 编号 2-4 (2012) |
Introduction to the cell culture and production of brachycome iberidifolia and chrysanthemum carinatum |
(Rus)
|
|
Litvinova I., Gladkov E.
|
| 卷 6, 编号 2-4 (2012) |
Improvement of the maintenance process of highly qualified personnel quality in the university |
(Rus)
|
|
Sorokina G., Medova O., Borovin Y., Tikhanovskaya S.
|
| 卷 6, 编号 2-4 (2012) |
Automated calculation of dual-flow heat exchangers |
(Rus)
|
|
Lyang V.
|
| 卷 6, 编号 2-4 (2012) |
Expert system for selection of optimal process of processing natural gas |
(Rus)
|
|
Koltsova E., Filippova E., Zubov D.
|
| 卷 6, 编号 2-4 (2012) |
Explosions of industrial dusts and their prevention Ph.D., Prof. V. A. Bonar |
(Rus)
|
|
Bondar V., Lyubartovich V.
|
| 卷 6, 编号 2-4 (2012) |
The dependence of the demographic situation of migration flow showed by the example of the three simulated countries with different social and economic indicators |
(Rus)
|
|
Pyrov P., Butusov O., Nikoforova O.
|
| 卷 6, 编号 2-4 (2012) |
New application of secondary polymer composites |
(Rus)
|
|
Skopintsev I., Mileshkina A., Kamshad F.
|
| 卷 6, 编号 2-4 (2012) |
The innovative research works of the Scientific and Technical Center "Technique of low temperatures" |
(Rus)
|
|
Kalnin I.
|
| 卷 6, 编号 2-4 (2012) |
Way to assess the possibility of spontaneous combustion of microbiological products at storage |
(Rus)
|
|
Gavrilov A., Korolchenko I.
|
| 卷 6, 编号 2-4 (2012) |
The impact of stress on the culture of tissue Arabidopsis thaliana ininvitroconditions |
(Rus)
|
|
Dolgikh Y., Sedov K.
|
| 卷 6, 编号 2-4 (2012) |
Fuel converter for an internal combustion engine |
(Rus)
|
|
Goncharov D., Belyaevsky M.
|
| 卷 6, 编号 2-4 (2012) |
Kinetostaticcalculation of six-linked lever mechanismusingtheanalyticalmethod |
(Rus)
|
|
Ivanov V.
|
| 卷 6, 编号 2-4 (2012) |
Way to calculate the time to spontaneous combustion of deposits substances having unbalanced heat exchange with the environment |
(Rus)
|
|
Oskina T., Korolchenko I.
|
| 卷 6, 编号 2-4 (2012) |
Legionellosis: the causes, preventive measures |
(Rus)
|
|
Sister V., Zedilin A., Ivannikova E., Tartakovsky I., Shulga E.
|
| 卷 6, 编号 2-4 (2012) |
Evaluation of the conditions of oil seepage into the ground after corrosion damage of a tank covering |
(Rus)
|
|
Kuts Y., Korolchenko I., Veksler G.
|
| 卷 6, 编号 2-4 (2012) |
Kinematic calculation ofsix-memberedlinkage using theanalytical method |
(Rus)
|
|
Ivanov V.
|
| 卷 6, 编号 2-4 (2012) |
Enhancing the stability of bentgrass (AgrostisstoloniferaL.) to salts of cadmium |
(Rus)
|
|
Gladkov E., Gladkova O., Glushetskaya L.
|
| 卷 6, 编号 2-4 (2012) |
Oily soils treatment optimization |
(Rus)
|
|
Sufiyanov R.
|
| 卷 6, 编号 2-4 (2012) |
Computer simulation of fuzzy equation of transfer of radioactive pollution |
(Rus)
|
|
Butusov O., Popov D., Redikultseva N.
|
| 卷 6, 编号 2-4 (2012) |
Study of physico-chemical and structural processes in obtaining of aluminosilicate glass ceramics |
(Rus)
|
|
Meshalkin V., Orlova O., Butusov O., Galaev A.
|
| 卷 6, 编号 2-4 (2012) |
The calculation ofthe statistical characteristics ofassessmentpoint on theEarth's surface, obtained byone-coordinatedirection obtainedby the one-coordinate DF from the aircraft |
(Rus)
|
|
Blokhina V.
|
| 卷 6, 编号 2-4 (2012) |
Recycling oily soils as derived feedstock to produce engine fuels |
(Rus)
|
|
Sufiyanov R.
|
| 卷 6, 编号 2-4 (2012) |
Peculiarities of the competition providers of corporate training |
(Rus)
|
|
Kaganov V.
|
| 卷 6, 编号 2-4 (2012) |
Automated calculation of heating power and heating time of a die mold in start-up mode |
(Rus)
|
|
Lyang V.
|
| 卷 6, 编号 2-4 (2012) |
Intensification of flotation cleaning of oil-contaminated water by the preliminary ultrasound activation reagent |
(Rus)
|
|
Aitova I., Veksler G., Golberg G., Mullakaev M.
|
| 卷 6, 编号 2-4 (2012) |
Modeling of electromagnetic field in the resonator with regard to the measurement of the fuels water cut |
(Rus)
|
|
Kardyshev G., Shatalov A., Suslin M.
|
| 卷 6, 编号 2-4 (2012) |
Use of distillery bards as raw materials to produce high-protein feed products |
(Rus)
|
|
Melnikov E., German L., Zakharov Z., Zharko M.
|
| 卷 6, 编号 2-4 (2012) |
Vacuum-evaporative process of water cooling together with counter flow |
(Rus)
|
|
Marinyuk B., Krysanov K., Spritnyuk S.
|
| 卷 6, 编号 2-4 (2012) |
The use of gum arabic in the washing compositions of surfactants |
(Rus)
|
|
Ivanova A., Bulatova M.
|
| 卷 6, 编号 2-4 (2012) |
Methods of intensification of the processes of crystallization in cryogranulation of liquid suspensions in liquid nitrogen. The research of destinations of front changing of boiling regimes |
(Rus)
|
|
Belukov S., Malyshev R.
|
| 卷 6, 编号 2-4 (2012) |
Behaviour modelling of dispersed substances nanoscale level in a special channel dies |
(Rus)
|
|
Klevleev V., Kuznetsova I.
|
| 卷 6, 编号 2-4 (2012) |
Expert system for analytical monitoring of high purity organic solvents |
(Rus)
|
|
Bessarabov A., Trynkina L., Trokhin V., Vendilo A., Gordeeva E.
|
| 卷 6, 编号 2-4 (2012) |
The study of flow structure in the field of centrifugal forces |
(Rus)
|
|
Sister V., Eliseeva O.
|
| 卷 6, 编号 2-4 (2012) |
Computer management of the quality of anti-icing materials for highways |
(Rus)
|
|
Bessarabov A., Glushko A., Stepanova T., Gordeeva E.
|
| 卷 6, 编号 2-4 (2012) |
The peculiarities of a stationary distribution of melt temperature of the polymer in extruder caused by heat transfer |
(Rus)
|
|
Khametova M.
|
| 卷 6, 编号 2-4 (2012) |
The research on iron removal filters |
(Rus)
|
|
Veregina E., Efremenko T., Surodeeva L., Schibro E.
|
| 卷 6, 编号 2-4 (2012) |
Dielectric relaxation and structural changes in aqueous solutions of tetromethyl carbamid |
(Rus)
|
|
Lileev A., Lyaschenko A., Okhotnikova K.
|
| 卷 6, 编号 2-4 (2012) |
Mathematical support and software for the durability calculation of an expansion joint bellows |
(Rus)
|
|
Lugantsev L., Trubaeva I.
|
| 卷 6, 编号 2-4 (2012) |
Instrumentation and methodological support of determination of waterand fat-soluble antioxidants |
(Rus)
|
|
Fedina P., Latyshenko K.
|
| 卷 6, 编号 2-4 (2012) |
The laser-spark method of control of urban soils on the content of heavy metals |
(Rus)
|
|
Raxumovskaya M., Latyshenko K.
|
| 卷 6, 编号 2-4 (2012) |
Estimate of the factor of safety of convex bottoms under uniform internal pressure |
(Rus)
|
|
Lyang V.
|
| 卷 6, 编号 2-4 (2012) |
Water supply system regulation in towns of England in the Tudor period |
(Rus)
|
|
Bashmakova E.
|
| 卷 6, 编号 2-4 (2012) |
The use of pulse-width modulation for reduction the amplitude noise on the example of the contact conductivity meter |
(Rus)
|
|
Golovin V., Fateev D.
|
| 卷 6, 编号 2-4 (2012) |
The cultivation of the yeast Phaffia rhodozyma with constant or periodic light |
(Rus)
|
|
Zakharov Z., German L., Petrischeva O., Zharko M.
|
| 卷 6, 编号 2-4 (2012) |
The study of the performance of the combined points for the processes of cleaning gases in biofilters |
(Rus)
|
|
Mitin A., Zagustina N., Nikolaikina N., Pushnov A.
|
| 卷 6, 编号 2-4 (2012) |
Selection of the design mixers and mixing mode for the aeration of the soil |
(Rus)
|
|
Kramm E., Zaborskaya A.
|
| 卷 6, 编号 2-4 (2012) |
Computer analysis of the carrying capacity and the working life of tubular structures under low-cycle loading |
(Rus)
|
|
Lugantsev L., Chernenko M.
|
| 卷 6, 编号 2-4 (2012) |
Combined schemes of water treatment systems |
(Rus)
|
|
Berengarten M., Gulyaeva E.
|
| 卷 6, 编号 2-4 (2012) |
Comparison of the effectiveness of immobilization of XYLOTROPHIC basidiomycete on carriers of organic and inorganic origin |
(Rus)
|
|
Ryabova-Lekhmus A., Biryukov V.
|
| 卷 6, 编号 2-2 (2012) |
The current state and prospects of ultrasonic dimensional processing in mechanical engineering |
(Rus)
|
|
Morgunov Y., Opalnitskiy A., Perepechkin A.
|
| 卷 6, 编号 2-2 (2012) |
Analysis of measuring errors and an object in determining residual stresses |
(Rus)
|
|
Yakovlev M.
|
| 卷 6, 编号 2-2 (2012) |
Radiospectroscopy of magnetic materials |
(Rus)
|
|
Kozlov V.
|
| 卷 6, 编号 2-2 (2012) |
Importance of simplicial sets in quality management of technical products |
(Rus)
|
|
Martishkin V., Fazlulin E.
|
| 卷 6, 编号 2-2 (2012) |
Observability in problems of mathematical physics |
(Rus)
|
|
Korneichuk L., Vyskrebtsov V.
|
| 卷 6, 编号 2-2 (2012) |
Criteria of processing operations optimization of gear-producing based on various methods of tooth formation |
(Rus)
|
|
Vinogradov V., Cherepahin A.
|
| 卷 6, 编号 2-2 (2012) |
Key problems of manufacturing of solid hard-alloyed end tools on CNC machines |
(Rus)
|
|
Maksimov Y., Yemelianov P.
|
| 卷 6, 编号 2-2 (2012) |
Status and opportunities for development of some gear cutting technologies and equipment |
(Rus)
|
|
Shvychkov D.
|
| 卷 6, 编号 2-2 (2012) |
Estimation of CNC machine error influence on precision of machining of surfaces of the body of tool holder for replaceable inserts |
(Rus)
|
|
Nadolskiy M.
|
| 卷 6, 编号 2-2 (2012) |
Modern methods of hollow metal microsphere manufacture |
(Rus)
|
|
Petrov M., Bast Y., Petrov P., Sheypak A.
|
| 卷 6, 编号 2-2 (2012) |
Highly effective layered tool materials with nano-dispersed multi-layered of wide range of applications |
(Rus)
|
|
Maximov Y., Vereschaga A., Vereschaga A., Bublikov Y., Kryuchkov K., Kozlov A.
|
| 卷 6, 编号 2-2 (2012) |
Identification of the most significant areas of parameters estimation in development of the criterial approach for the selection of measurements means in designing and modernization of technological processes |
(Rus)
|
|
Shtunder A.
|
| 卷 6, 编号 2-2 (2012) |
Increasing of cutting efficiency of heat-treated steel through the application of cutting tools of high-strength composite ceramic with coating E. S. Sotova, M. N. Lazareva |
(Rus)
|
|
Sotova E., Lazareva M.
|
| 卷 6, 编号 2-2 (2012) |
Mechanical processing with activated air |
(Rus)
|
|
Chekalova E., Chekalov P.
|
| 卷 6, 编号 2-2 (2012) |
Virtual coordinate-measuring machine |
(Rus)
|
|
Suslin V., Dzhunkovsky A., Popovkin A., Holodov D.
|
| 卷 6, 编号 2-2 (2012) |
Experimental investigation of the process of extrusion of a technological groove in a galvanized strip |
(Rus)
|
|
Tipalin S.
|
| 卷 6, 编号 2-2 (2012) |
Overview of the multi-layer sheet deformable materials for protection against noise |
(Rus)
|
|
Tipalin .., Saprykin B., Shpunkin N.
|
| 卷 6, 编号 2-2 (2012) |
Localized bending and twisting of the galvanized strip during formation of channel |
(Rus)
|
|
Tipalin S.
|
| 卷 6, 编号 2-2 (2012) |
Research of hardened galvanized sheet bending |
(Rus)
|
|
Tipalin S.
|
| 卷 6, 编号 2-2 (2012) |
Aspects of ensuring of reliability of crankshaft bearings |
(Rus)
|
|
Belokon K., Nikishin V., Sibiriakov S.
|
| 卷 6, 编号 2-2 (2012) |
New technology of processing of cutting tool by use of activated air |
(Rus)
|
|
Chekalova E.
|
| 卷 6, 编号 2-2 (2012) |
Possibility for finding of a common solution for Navier-Stokes equations |
(Rus)
|
|
Vyskrebtsov V.
|
| 卷 6, 编号 2-2 (2012) |
Application of an axisymmetric rigid-plastic finite element membrane model for evaluation of friction coefficients in sheet metal forming processes |
(Rus)
|
|
Petrov V., Mikhaylova V., Sukhomlinov L.
|
| 卷 6, 编号 2-2 (2012) |
Method of chemical reactions rate detection in the processes of neutralization of exhaust gases |
(Rus)
|
|
Samuel B.
|
| 卷 6, 编号 2-2 (2012) |
Nanodisperse multi-layered composite coatings for cutting tools |
(Rus)
|
|
Maximov Y., Bublikov Y., Vereschaka A., Vereschaka A., Haustova O., Kozlov A., Hodziev O.
|
| 卷 6, 编号 2-2 (2012) |
Reliability estimation of lathes with CNC by the accuracy of processing |
(Rus)
|
|
Avdeev V.
|
| 卷 6, 编号 2-2 (2012) |
Fractal multidimensional scale for controlling of the mode of dimensional electrochemical machining and evaluation of its output data |
(Rus)
|
|
Bavykin O.
|
| 卷 6, 编号 2-2 (2012) |
Increase of productivity of processing the pneumo - and hydraulic cylinders by enhancement of the device for combined machining and surface plastic deformation |
(Rus)
|
|
Pini B., Maximov Y., Ankin A., Adeev A.
|
| 卷 6, 编号 2-2 (2012) |
Approximate model of forecasting resource during the impact of non-Gaussian processes |
(Rus)
|
|
Podvoisky A., Borovskih V.
|
| 卷 6, 编号 2-2 (2012) |
Enhanced operating characteristics of the scanning magnet controlled ferroimpurities of molding compounds |
(Rus)
|
|
Sanduliak A., Sanduliak A., Kurenkov E., Sanduliak D., Golovanov A.
|
| 卷 6, 编号 2-2 (2012) |
Prospects of development and application of physico-chemical methods and technologies in engines manufacture |
(Rus)
|
|
Shandrov B., Morgunov Y., Saushkin B.
|
| 卷 6, 编号 2-2 (2012) |
Precision of machining on CNC machines |
(Rus)
|
|
Maksimov Y., Bekayev A., Nadolskiy M., Prokhorov A.
|
| 卷 6, 编号 2-2 (2012) |
Calculation and optimization of the welded frame for unique machine-tools |
(Rus)
|
|
Maksimov Y., Porkhunov S., Kuzminskiy D.
|
| 卷 6, 编号 2-2 (2012) |
Analysis of multilayer material producing and prospects of using of nonequal-thick sheet material |
(Rus)
|
|
Kolesov A.
|
| 卷 6, 编号 2-2 (2012) |
The problem of spreading of the plastic layer consisting of different environments |
(Rus)
|
|
Kadymov V.
|
| 卷 6, 编号 2-2 (2012) |
Models for calculation of thermal displacements of spindle assemblies |
(Rus)
|
|
Ivannikov S., Manaenkov I.
|
| 卷 6, 编号 2-2 (2012) |
Basic experiment and method for identifying of material functions of elastic-plastic deformation theory |
(Rus)
|
|
Bondar V., Prolubnikova A.
|
| 卷 6, 编号 2-2 (2012) |
Formation of roughness of the surface layer of non-rigid parts of hollow cylinder type during combined machining and surface plastic deformation |
(Rus)
|
|
Vetrova E.
|
| 卷 6, 编号 2-2 (2012) |
Influence of the mode parameters on the technological characteristics of the injector hole broaching operation |
(Rus)
|
|
Belov I., Gruzdev A., Saushkin B.
|
| 卷 6, 编号 2-2 (2012) |
Material prerequisites for the creation of machine-building products of new generation |
(Rus)
|
|
Volkov G.
|
| 卷 6, 编号 2-2 (2012) |
Electromagnetic field of the hybrid car |
(Rus)
|
|
Grafkina M., Niunin B., Teryaeva E.
|
| 卷 6, 编号 2-2 (2012) |
Multicriteria optimal design turbomachine disk |
(Rus)
|
|
Temis Y., Yakushev D.
|
| 卷 6, 编号 2-2 (2012) |
Technology of processing of complex shape products (on the example of gas-turbine engine mono-wheel blades) |
(Rus)
|
|
Gorelov V., Arshiniv S., Maximov Y., Pini B., Bekaev A., Merzlikin V., Vtorova A.
|
| 卷 6, 编号 2-2 (2012) |
Analysis of machinability of steel 75HGFC |
(Rus)
|
|
Volkov R., Golobkov A., Kuznetsov V., Cherepahin A.
|
| 卷 6, 编号 2-2 (2012) |
Features of mechanical treatment of parts of ceramic materials |
(Rus)
|
|
Gorelov V., Alekseev S.
|
| 卷 6, 编号 2-2 (2012) |
Approximation of plasticity functionals of elastic-plastic processes theory in non-isothermal loading under creep conditions |
(Rus)
|
|
Bondar V., Danshin V., Kostin A.
|
| 卷 6, 编号 2-2 (2012) |
Generalized method of supplementary strain in the problems of beam torsion |
(Rus)
|
|
Temis Y., Lazarev A., Malanova O.
|
| 卷 6, 编号 2-2 (2012) |
Primenenie fraktal'nogo analiza dlya opisaniya i otsenki stokhasticheski sformirovannykh poverkhnostey |
(Rus)
|
|
Vyacheslavova O., Bavykin O.
|
| 卷 6, 编号 2-2 (2012) |
Tangential oscillations with combination of cutting and surface plastic deformation of flexible shafts |
(Rus)
|
|
Ankin A.
|
| 卷 6, 编号 2-2 (2012) |
The conclusion of the Dirac matrices in the real, complex and quaternionic representations |
(Rus)
|
|
Ketsaris A.
|
| 卷 6, 编号 2-2 (2012) |
Application of laser welding technology in manufacture of pressure vessels of titanium alloy |
(Rus)
|
|
Kochergin S., Saushkin B.
|
| 卷 6, 编号 2-2 (2012) |
High precision machining of hardened steels using small-sized tools of cubic boron nitride |
(Rus)
|
|
Borovsky G., Neginsky E., Pini B., Khachikyan E.
|
| 卷 6, 编号 2-2 (2012) |
Efficiency improvement of multi-axis milling of complex surfaces on CNC machines |
(Rus)
|
|
Lukina S., Mamayenkov I.
|
| 卷 6, 编号 2-2 (2012) |
Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production |
(Rus)
|
|
Lukina S., Krutyakova M., Solovieva N., Girko V.
|
| 卷 6, 编号 2-2 (2012) |
Venture companies in modern mechanical engineering production |
(Rus)
|
|
Kuznetsov P.
|
| 卷 6, 编号 2-2 (2012) |
Numerical solution for the stress concentration problem for the case of a three-layered elastic plane with the two identical vertically placed circular holes under transverse compression |
(Rus)
|
|
Mikhaylova V., Sukhomlinov L., Mazin V.
|
| 卷 6, 编号 2-2 (2012) |
Designing of the technological process for manufacturing of parts based on technical and economic modeling |
(Rus)
|
|
Kuznetsov V., Vladyka A., Tsitrikov A., Zakharova O.
|
| 卷 6, 编号 2-2 (2012) |
Sintered metal alloys for high-loaded contacts of ignition system of internal combustion engine |
(Rus)
|
|
Arzamasov V., Smirnova E., Rykov D., Ryabchik T.
|
| 卷 6, 编号 2-2 (2012) |
Forming processes when machining of a solid of revolution by external broach |
(Rus)
|
|
Kuznetsov V., Yushin D., Khomyakova N., Krivonos R.
|
| 卷 6, 编号 2-2 (2012) |
Technique of definition the complexity of castings by design and technological parameters of a cast part |
(Rus)
|
|
Volkomovich A., Sorokin Y.
|
| 卷 6, 编号 2-2 (2012) |
Analysis and synthesis of robust control for linear systems of double damping |
(Rus)
|
|
Trindyuk V., Kiyko G.
|
| 卷 6, 编号 2-2 (2012) |
Theoretical studies of dependence of geometric parameters of a contact between a tool and a workpiece on installation of a tool in the process of burnishing |
(Rus)
|
|
Kuznetsov A., Vasiliev V., Bezhenar E., Zabolotnaya I., Sazonov D., Smirnov A.
|
| 卷 6, 编号 2-2 (2012) |
Determination of metals plasticity by combined cross-extrusion and upset |
(Rus)
|
|
Krutina E., Kalpin Y.
|
| 卷 6, 编号 2-2 (2012) |
Dynamic robust stabilization problem for the linear nonstationary systems |
(Rus)
|
|
Trindyuk V., Kiyko G.
|
| 卷 6, 编号 2-2 (2012) |
Integrated use of all secondary resources as the strategic goal of car utilization |
(Rus)
|
|
Bobovich B.
|
| 卷 6, 编号 2-2 (2012) |
Used automotive catalysts as major sources of secondary precious metals |
(Rus)
|
|
Bobovich B., Savko A.
|
| 卷 6, 编号 2-2 (2012) |
Statistical modeling of the output parameters in process of machining of ceramic composite materials with using bound-abrasive |
(Rus)
|
|
Bakharev V., Knutova E.
|
| 卷 6, 编号 2-1 (2012) |
Strength analysis of the frame of the unit for long loads when modifying the geometry of its elements |
(Rus)
|
|
Mishin P., Osipov N., Kramskoy N.
|
| 卷 6, 编号 2-1 (2012) |
Improving environmental quality of transport diesel by use of physical and chemical effects on the operating cycle |
(Rus)
|
|
Fomin V., Hergeledji M., Atrash R.
|
| 卷 6, 编号 2-1 (2012) |
Universal test bench for elastic behavior control of pressure plate of a ready-assemble clutch |
(Rus)
|
|
Petunin V., Prokopiev M., Prasolov A., Volkov D., Trankvilevskiy V.
|
| 卷 6, 编号 2-1 (2012) |
Engineering method of calculation of gasdynamic foil bearings of turbocompressors |
(Rus)
|
|
Merkulov V., Plykin M., Tishchenko I.
|
| 卷 6, 编号 2-1 (2012) |
General questions of interaction of an elastic wheel with rigid supporting surface |
(Rus)
|
|
Abuzov V., Balabina T., Chepurnoy S.
|
| 卷 6, 编号 2-1 (2012) |
Increase of dynamic qualities of diesel generator in the supplementary energy system of road train |
(Rus)
|
|
Fomin A.
|
| 卷 6, 编号 2-1 (2012) |
Analysis of forming of contact area by rear wheel-drive 4x2 wheel chassis with elastic circuit of power flow input |
(Rus)
|
|
Sergeyev A.
|
| 卷 6, 编号 2-1 (2012) |
Prediction of remaining lifetime of constructions and machine elements |
(Rus)
|
|
Starodubtseva S., Gusev A.
|
| 卷 6, 编号 2-1 (2012) |
Analysis of constructions providing the maximum thermodynamic effectiveness of reciprocating engines |
(Rus)
|
|
Khripach N., Lezhnev L., Papkin B., Shustrov F., Tatarnikov A., Tingaev N.
|
| 卷 6, 编号 2-1 (2012) |
Theoretical analysis of plane motion of rolling wheel when forming of contact area |
(Rus)
|
|
Sergeyev A.
|
| 卷 6, 编号 2-1 (2012) |
Use of electrohydrodynamic engine on vehicles |
(Rus)
|
|
Sokovikov V.
|
| 卷 6, 编号 2-1 (2012) |
Test bench for evaluation of the strength characteristics of elements of wheels |
(Rus)
|
|
Balabin I., Chabunin I., Gruzdev A., Lukyanov M.
|
| 卷 6, 编号 2-1 (2012) |
Kinematic and force analysis of universal multiple differential mechanism of automatic gearboxes |
(Rus)
|
|
Voloshko V., Galimyanov I., Salakhov I., Mavleyev I.
|
| 卷 6, 编号 2-1 (2012) |
The method of construction of compact kinematic schemes of planetary gearboxes |
(Rus)
|
|
Sharipov V., Marinkin A.
|
| 卷 6, 编号 2-1 (2012) |
Analysis of the characteristics of external combustion heat engine by computer simulation |
(Rus)
|
|
Potapov S., Nikishkin S., Piskarev M.
|
| 卷 6, 编号 2-1 (2012) |
Evaluation of the law of nonlinearity of elastic characteristic of an automobile suspension under isochronous frequency of free oscillations according to vehicle weight change |
(Rus)
|
|
Kramskoy N., Chukanin U., Shcherbakov V.
|
| 卷 6, 编号 2-1 (2012) |
Methods of acquisition and spectral analysis of vibration characteristics of artificial tracks |
(Rus)
|
|
Podrubalov V., Podrubalov M.
|
| 卷 6, 编号 2-1 (2012) |
Slipping of equalizing element of a synchronizer in preselective gearbox |
(Rus)
|
|
Sharipov V., Kruchkov V.
|
| 卷 6, 编号 2-1 (2012) |
Development of test-benches for control and research tests of turbochargers |
(Rus)
|
|
Kaminskiy V., Kaminskiy R., Lazarev A., Grigorov I., Kostyukov A., Korneev S., Kovaltsov I., Sergeev A., Gusak A., Sibiryakov S.
|
| 卷 6, 编号 2-1 (2012) |
Unified control algorithm for torques delivered to wheels of all-wheel-drive vehicles |
(Rus)
|
|
Pliev I., Saykin A., Arkhipov A., Akhmedov A.
|
| 卷 6, 编号 2-1 (2012) |
The form of contact of deformable elastic wheel and soil and the calculation of the track depth |
(Rus)
|
|
Solovyov V., Shukhman S., Kapralova M.
|
| 卷 6, 编号 2-1 (2012) |
Turbo fan for intercooling system of transport turbodiesel engine |
(Rus)
|
|
Andreenkov A.
|
| 卷 6, 编号 2-1 (2012) |
Complex automation of petrol stations |
(Rus)
|
|
Golovkova E., Sofiev A.
|
| 卷 6, 编号 2-1 (2012) |
Piecewise continuous regulation of a tractor speed |
(Rus)
|
|
Gorodetskiy K., Bannikov M., Ivkova G., Muratova S., Shuvaev D.
|
| 卷 6, 编号 2-1 (2012) |
Forecasting of operating temperature of pneumatic tires of rock handler trucks |
(Rus)
|
|
Goryunov S., Sharipov V.
|
| 卷 6, 编号 2-1 (2012) |
Numerical and experimental investigation of braking performance of a bus |
(Rus)
|
|
Groshev A., Konikova G., Kostin S., Trusov Y., Tumasov A.
|
| 卷 6, 编号 2-1 (2012) |
Analysis of the design of the automotive generator of reciprocating type |
(Rus)
|
|
Dukhanina V., Ketsaris A.
|
| 卷 6, 编号 2-1 (2012) |
Analysis of the workflow of linear generator of reciprocating motion type |
(Rus)
|
|
Dukhanin V., Ketsaris A.
|
| 卷 6, 编号 2-1 (2012) |
Selection of a rational layout in the compact urban vehicle design |
(Rus)
|
|
Ivshin K., Polozov A.
|
| 卷 6, 编号 2-1 (2012) |
Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle |
(Rus)
|
|
Kamennyy A., Kostyukov A., Makarov A., Pustyntsev M.
|
| 卷 6, 编号 2-1 (2012) |
Kinetostatical analysis of a lifting mechanism |
(Rus)
|
|
Gebel E., Zhursenbaev B., Sarbasov A.
|
| 卷 6, 编号 2-1 (2012) |
Methods of selecting the rational combination of materials for sandwich panels of a bus body |
(Rus)
|
|
Voronkov O., Peskov V.
|
| 卷 6, 编号 2-1 (2012) |
Mathematical description and optimization of performance of transmission and brake control in problems of optimal vehicle engineering |
(Rus)
|
|
Akhmedov A., Bakhmutov S.
|
| 卷 6, 编号 2-1 (2012) |
Test-bench for tractive ability and efficiency tests of belt drives |
(Rus)
|
|
Balovnev N., Dmitrieva L., Semin I.
|
| 1651 - 1800 的 2404 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
