检索

Legal state or change of priorities: analysis of messages of the President of the Russian Federation to the Federal Assembly

Marzak G.

(Rus)

卷 7, 编号 1-3 (2013)

The cause of spontaneous fluctuations

Vyskrebtsov V.

(Rus)

卷 12, 编号 3 (2018)

The method of determining the efforts of the pre-tightening of bolts to a bearing of the crankshaft, automobile and tractor engines

Gots A.

(Rus)

卷 4, 编号 2 (2010)

Development of software and hardware interface for educational process in the complex study of programming languages at different levels

Kholodov G., Solopova O., Popovkin A.

(Rus)

Ways to reduce the cost of production of continuous basalt fiber

Sekerin V.

(Rus)

卷 4, 编号 2 (2010)

Multifunction voltage regulator for generator sets of a new generation

Chernov A., Akimov A., Krotov A.

(Rus)

卷 7, 编号 4-2 (2013)

Modernization and prospects of Russian higher education development

Sokurenko E., Kryuchkova E.

(Rus)

Investigation of the Kinematics of the Radial Extrusion Process with the Running Deformation Zone

Kalpin Y., Petrov P., Petrov M.

(Rus)

卷 16, 编号 4 (2022)

Awarding the Prize of the Government of the Russian Federation in Science and Technology for 2022

Editorial B.

(Rus)

Charitable activities in the villages of the Russian Federation as a competitive advantage of social entrepreneurship

Popova L., Shiriaeva S.

(Rus)

卷 18, 编号 4 (2024)

Validation of the mathematical model of the front drive axle suspension according to frequency response

Kulagin V., Rakhmatov R., Likeev A.

(Rus)

Statistics educational potential

Korgenevskaya E.

(Rus)

Analysis of Mechanics of the Process of Cutting Hardened Material. Chip formation

Olenin L.

(Rus)

Analysis of raw material dependence of the Russian economy and its impact on the competitiveness of the country

Shiriaev D., Vasilieva O.

(Rus)

Phenomenological approach to the determination of the stress state of the indicator chart for plasticity

Grushko A.

(Rus)

卷 8, 编号 1-1 (2014)

Comparative evaluation of automobiles KAMAZ-4350, KAMAZ-43114 and Ural-4320-31 flotation on loose sand

Ostretsov A., Esakov A., Sharipov V.

(Rus)

The role of strategic analysis in the management of competitiveness

Aleksavina U.

(Rus)

Influence of Operation and Assembly Interaction of Pipe Valves on Their Quality Rating

Semenov A., Naumova S.

(Rus)

卷 7, 编号 1-3 (2013)

Calculation-experimental determination of material functions of stainless steel 12Х18H10Т

Bondar V., Prolubnikova A., Abashev D.

(Rus)

Problems of the engineering industry in Russia in the conditions of economic instability

Loiko A., Ulyanova N.

(Rus)

Innovative Technologies in Educational Process for Preparation of Engineering Students

Zabenkina E., Artamonov I.

(Rus)

Demagnetizing channel factor and "bundle" of magnetization channels in granular medium

Sandulyak A., Sandulyak A., Ershov V.

(Rus)

Some measures to support the Russian Federation Industry

Leiba S., Gorohova A.

(Rus)

3D Model of Transfer of Pollutions from Motor Vehicles to the Air

Sukhinov A., Gadelshina B., Lyubomischenko D.

(Rus)

Decision support system for supplier selection in supply chain

Butusov O., Dubinin M.

(Rus)

Semiotics of comic in English-language fairy tale discourse

Plakhova O.

(Rus)

卷 7, 编号 1-3 (2013)

Steady viscous fluid flow at pipe entrance

Vyskrebtsov V.

(Rus)

Constitutional and legal regulation of use of languages in activities of government bodies and local authorities of the Russian Federation and Estonia

Machinskaya D.

(Rus)

卷 7, 编号 2-1 (2013)

Modern trends in electric motor control

Zhmatov D., Gorkin V., Pakhomov E.

(Rus)

Reduced fuel in charge of iron ore agglomeration by supplying a sintered layer and the gas-water mixture

Bogomolov V., Bogomolova N., Grechko E.

(Rus)

Determination of the stress-strain state of plastically deformed object with regard to the processes semi-hot die forging

Pyzhov V.

(Rus)

Thermal effect at impact of a drop with a highly heated wall

Baranov D., Kazenin D., Skochilova Y., Trusov M.

(Rus)

卷 8, 编号 1-2 (2014)

Ensuring the quality of the surface layer and the reduction of process costs when machining R.N. Akinshin

Akinshin R.

(Rus)

卷 8, 编号 2-5 (2014)

Status and trends of venture business revitalization in Russia

Gribov V., Lubenets N.

(Rus)

Commodity market of Russia: the quality, competitiveness and management

Alenina E., Iliin A., Ziulina V.

(Rus)

卷 18, 编号 4 (2024)

Testing the effectiveness of the algorithm for suppressing self-oscillations during intensive braking of a vehicle

Klimov A.

(Rus)

卷 16, 编号 1 (2022)

The choice of design parameters of main and conrod bearings for passenger car engines

Zlenko M., Terenchenko A., Shibaev I.

(Rus)

卷 5, 编号 1 (2011)

Model stability control vehicle systems

Komarov V.

(Rus)

Influence of Alloying and Structural Condition of Thermionic Emission and Heat Resistance of Niobium

Arzamasov V., Smirnova E., Stroyev A., Polunov I.

(Rus)

Overview of the multi-layer sheet deformable materials for protection against noise

Tipalin .., Saprykin B., Shpunkin N.

(Rus)

The influence of cutting modes and structural parameters of the device for combined cutting processing and surface plastic deformation on the roughness of the processed surface unstable parts of hollow cylinder type

Vetrova E., Lebedev P., Adeev A.

(Rus)

Teaching of humane subjects based on the profile of a university

Kharlamova T.

(Rus)

Ways and means of overcoming social evil in Russian philosophy

Barkova I.

(Rus)

Use of Compleons for Environmentally Friendly Processes of Dissolution of Iron-Oxide Deposits

Artamonova I., Gorichev I., Zabenkina E., Lesnova L.

(Rus)

The Mathematics Model of Mechanism Forming the Spot Face of Rolling Wheel

Sergeev A., Cherny I.

(Rus)

Development and research of technological possibilities of manufacturing two-layer spherical plugs of ball valves from billets by crimp method

Ageev N., Malyh F., Dubickij K.

(Rus)

卷 8, 编号 2-5 (2014)

Liberal reforms in Russia: historical and economic aspects

Filyakin Y.

(Rus)

卷 10, 编号 1 (2016)

Simulation of "body-suspension-wheel-soil" system using the finite element method

Kurdyuk V., Volskaya N., Rusanov O.

(Rus)

卷 13, 编号 1 (2019)

Improvement of four-wheel drive vehicle controllability with a connected front axle through the redistribution of torque

ZHilejkin M., EHranosyan A.

(Rus)

卷 5, 编号 1 (2011)

Effect of power racks in the inter-turbine nozzle of the two-shaft gas turbine engine to uneven flow at the entrance to the power-turbine

Kostyukov A., Plykin M.

(Rus)

Study of the Jacketing with Sheet Material Stretching

Shpunkin N., Tipalin S., Gladkov V., Nikitin M.

(Rus)

Deformation of Parts in Manufacture

Zinchenko V., Gladkov V., Kruglov S.

(Rus)

Highly effective layered tool materials with nano-dispersed multi-layered of wide range of applications

Maximov Y., Vereschaga A., Vereschaga A., Bublikov Y., Kryuchkov K., Kozlov A.

(Rus)

卷 7, 编号 4-2 (2013)

Using of historical material in study of Russian language in a technical university

Soluyanova E.

(Rus)

Features of study of philosophy and sociology by students of technical specialties

Khudoley S., Matisov S.

(Rus)

Legislative regulation of minority languages in the Russian Federation

Machinskaya D.

(Rus)

卷 8, 编号 4-4 (2014)

Gravitational analogue of the Earth and its shape

Rusanov P.

(Rus)

Usage of auxiliary models for the solution of problems of evaluation of innovative projects in the modern economy

Remizova A., Levitskaya A., Litvin I.

(Rus)

Mandates of Little Russian nobles for the Legislative Commission of Catherine the Great (1767-1768)

Frantsuzova O.

(Rus)

卷 11, 编号 3 (2017)

Problems in the implementation of the control system for vertical reactions of vehicle wheels

Ryazantsev V., Al'salamekh B., Levenkov Y.

(Rus)

卷 13, 编号 1 (2019)

Agricultural tractors on Russian market (based on the International exhibition “Agrosalon 2018”)

Parfenov A.

(Rus)

Theoretical and Applied Problems of Study of Psycho-pedagogical Support of Development of Gifted Students in Higher Technical School

Bargamyants M., Bargamyants N.

(Rus)

卷 6, 编号 2-4 (2012)

System of decision making support based on the fuzzy algorithm for selection of a supplier in the supply chain

Butusov O., Dubin M., Meshalkin V., Nikoforova O.

(Rus)

The necessity of modernization of the system of personnel management in Russian companies

Tayvo M., Latypov N.

(Rus)

Intellectual property as a factor of development of innovative economy of Russia

Ulyanova N., Ibroimov G.

(Rus)

Development trends in the development of quality management systems in education

Shamgunova A.

(Rus)

Velocity Profile in Cell of Granulated Medium (Adapted Model of Stokes Flow around Ball)

Sandulyak A., Sandulyak A., Ershova V.

(Rus)

Mechanical processing with activated air

Chekalova E., Chekalov P.

(Rus)

Analysis of enhancing the effectiveness of insurance companies at mergers and acquisitions

Loiko A.

(Rus)

Socially oriented market economy: past, present and future

Filyakhin Y.

(Rus)

The relationship of elastic deformations of four-high system during formation of a profile and flatness of rolled strips

Belsky M., Mukhin Y.

(Rus)

卷 8, 编号 2-2 (2014)

Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type

Vetrova E., Lebedev P., Adeev A.

(Rus)

Conflicts and their impact on competitiveness and innovation development of organization

Bohanzeva I., Elizarova N.

(Rus)

卷 6, 编号 1 (2012)

CONDITIONS NECESSARY FOR THE DEVELOPMENT OF SMALL INNOVATIVE BUSINESSES IN RUSSIA

Gribov V., Kamchatnikov G.

(Rus)

Sustainable Growth of Competitiveness as a Result of the Modernization of Russia on the Basis of Innovation

Kravtsova V., Alenina E., Trishkin A.

(Rus)

The mechanism for competitiveness assessment of the propulsion engineering production

Ionov V., Taiwo M.

(Rus)

Information Component of Competitiveness Recovery of Russian Small and Medium Enterprises

Rognova O., Igumnov V., Goncharova A.

(Rus)

Identification of a Vehicle Engine Operation for Use in a Mathematical Model of its Motion (by an example of DT466 engine)

Lepeshkin A., Kurmaev R., Katanaev N.

(Rus)

Health status of workers in relation to the environment

Kudrov A.

(Rus)

卷 8, 编号 1-2 (2014)

Interrelation of wear resistance with quality parameters of the surface layer of parts after machining

Sutyagin A.

(Rus)

卷 7, 编号 1-5 (2013)

Modernization and innovation of industrial production as factors, ensuring strategic stability and competitiveness of business organizations

Lyasnikov N., Dudin M., Muzaev S., Medyankova E.

(Rus)

Directions of development of innovative activity in industrial enterprises

Mochalkova K., Petergova A.

(Rus)

卷 5, 编号 1 (2011)

Supervision of new phenomena in a flow-pattern of viscous liquid

Vyskrebtsov V.

(Rus)

The turrets lathes with additional drive of rotation axial tools

Pini B., Maksimov Y., Lebedev P.

(Rus)

Cutting quality and accuracy parameters of billet at the cutting process in the dies by rotary tool

Kokorin V., Filimonov V., Zemskova A.

(Rus)

Business processes at the enterprises of automotive industry in Russia: evaluation of the effectiveness and governance issues

Alenina E., Paskhina A.

(Rus)

卷 8, 编号 4-3 (2014)

Analytical method of determining the extreme positions of special mechanisms using software systems

Ivanov V., Korenovskiy V., Mamaev A.

(Rus)

卷 12, 编号 3 (2018)

Comparison of the analytical solutionof efficieтcy regenerative rotating heatexchangethe device with resultsof numericalcalculations

Kalnitsky F., Kostyukov A.

(Rus)

Optimization of Park Structure and Parameters of Assembly Equipment in Automotive Manufacture

Lamin I.

(Rus)

The Cycle Timing of an Automatic Stacker Crane an Acceptance Section of a Production Site

Antipenko B., Voronenko V., Sedykh M., Alexeev D., Filkin B.

(Rus)

卷 4, 编号 2 (2010)

Study of the influence of structural parameters on the dynamic load in the mechanical automotive transmission with hybrid powerplant

Selifonov V., Nguyen Khac Tuan -.

(Rus)

Ways of Increasing the Life of Bearing Assemblies of High-speed Turbomachinery with Wick Lubrication

Kustarev Y., Kostyukov A., Valeev A., Plykin M.

(Rus)

The problem of spreading of the plastic layer consisting of different environments

Kadymov V.

(Rus)

Analytical method of estimating the results of interaction of elastic wheel with deformable bearing surface in the sustained straight rolling motion

Lepeshkin A., Petrov S.

(Rus)

Methods of comparative evaluation of cost and quality of innovative solutions in the project life cycle of high-tech products of mechanical engineering production

Lukina S., Krutyakova M., Solovieva N., Girko V.

(Rus)

Finding the base for the calculation of quality products at the design stage of working documents

Martishkin V.

(Rus)

卷 7, 编号 1-1 (2013)

The method of selection of the main elements of the hydrostatic transmission wheeled machine

Kyrmaev R., Kruglov S., Lepeshkin A., Medvedev A., Kuru D.

(Rus)

Energy and resource efficiency in high temperature furnaces with false housing

Bolshakova N.

(Rus)

Choice of optimal ways of protection of intellectual activity results in the field of engineering ecology

Suslina I.

(Rus)

Aspects of the status and structure of the special vocabulary in the modern Russian language (ex. terms of mechanical engineering)

Isaeva N., Zmazneva O.

(Rus)

卷 8, 编号 2-3 (2014)

Calculation of thermal regimes and forecasting of the molds for plastic injection molding

Zyukov E., Bulatov M., Duvidzon V.

(Rus)

Deductive logic in solving computer knowledge representation

Inozemtsev V.

(Rus)

卷 8, 编号 2-5 (2014)

Party composition of the II Congress of Soviets

Panin E.

(Rus)

Russia in the report on the global competitiveness of the World Economic Forum

Karabagli R., Shiriaev D.

(Rus)

To the question of the competitiveness of companies

Panin M., Borodacheva L.

(Rus)

卷 9, 编号 4-4 (2015)

Transverse compression of a two-layered elastic plane with a circular hole on the border between layers

Mazin V., Mikhaylova V., Sukhomlinov L.

(Rus)

卷 11, 编号 2 (2017)

Calculation and substantiation of design parameters of automotive mechanical stabilizers of lateral stability with adjustable rigidity

Tyagunov A., Kartashov A.

(Rus)

卷 12, 编号 1 (2018)

Frequency analysis of the system of stabilization of vertical reactions on the wheels

Al'salamekh B., Ryazantsev V.

(Rus)

Integration of Russian Higher Education into European Educational Space

Kochanova E., Kochanov N.

(Rus)

Prospects of High-tech Development of the Russian Federation in Context of the Global Geopolitical Transformations

Platko А.

(Rus)

Simulation Model of Preproject Calculation of Assembling Equipment Parameters

Lamin I., Abramchenkov N.

(Rus)

Nano-boom and the University

Volkov G.

(Rus)

The Economic Justification of the Process of Restructuring of Industrial Enterprises

Ionov V.

(Rus)

Experience in the Creation and Implementation of complex industry vacuum systems (based on devices and component parts eliminating movement friction and designed to work in the field of micro-and nano-electronics and other high-tech)

Vasin V.

(Rus)

The Influence of Interaxial Deviation in the Control System of Continuously Variable Transmission of AWD Six-Wheeler on the Operating Efficiency

Lepeshkin A., Kurmaev R.

(Rus)

Risk and Reliability Management for Motor Transport on the Basis of Monitoring of Features of Operating Vehicles

Komarov V.

(Rus)

Analysis of constructions providing the maximum thermodynamic effectiveness of reciprocating engines

Khripach N., Lezhnev L., Papkin B., Shustrov F., Tatarnikov A., Tingaev N.

(Rus)

Simulation of a mixture formation in a cylinder of the engine running on Otto-Diesel cycle

Kamennyy A., Kostyukov A., Makarov A., Pustyntsev M.

(Rus)

Assessing sustainable development in the conditions of transnationalization

Govorina E., Blyznyuk O.

(Rus)

The interactions between educational institutions and enterprises analysis

Tumin Y., Sekerin V., Yurkevich E.

(Rus)

Analysis of innovative activity of the Russian organizations

Drynochkin A., Sekerin S.

(Rus)

卷 7, 编号 1-1 (2013)

Mathematical problems of calculating the multi-zone models of a cycle of internal combustion engine with spark ignition

Apelinskiy D., Shenderovskiy I., Runovskiy K.

(Rus)

Separation of steam by partial condensation on tube bundle

Zhikharev A.

(Rus)

The formation of national workers' faculties in Soviet Russia

Panin E.

(Rus)

Investigation of the process of storm waste water treatment from oil

Galieva Y., Suris A.

(Rus)

Methodology development of research activity of the stock market U

Inozemtseva U.

(Rus)

卷 8, 编号 2-3 (2014)

Determination of values of the solution flow rate and temperature in carbon dioxide absorption process

Gureev A., Pikulin Y.

(Rus)

卷 8, 编号 4-5 (2014)

Translating features of scientific texts

Borishanskaya M., Kurbakova M.

(Rus)

The integrated logistic support of after-sales service of aviation gas turbine engines and gas-pumping installations

Kalugin S.

(Rus)

Design features of organizational structures of the executive branch at regional and municipal levels

Burlakov V., Sadkov V., Vlasenkova E.

(Rus)

卷 9, 编号 1-1 (2015)

Simulation of gear change in transmissions of agricultural tractors

Gorodetskiy K., Shuvaev D., Alendeev E., Muratova S., Melnikov A.

(Rus)

卷 9, 编号 4-4 (2015)

Numerical methods in the study of seismic dynamics of complex systems of underground pipelines

Rashidov T., Bekmirzaev D.

(Rus)

Internal PR-technologies as a factor in the formation of a competitive HR-brand

Guzhina G., Guzhin A.

(Rus)

The role of the professional accountant's judgments in forming the entity's financial statements structures

Girka K.

(Rus)

The problem of placement of the United States national missile defense in Europe in the context of Russia-NATO relations

Kalachev D.

(Rus)

卷 10, 编号 4 (2016)

The choice of the main parameters of vehicles of classes A, B and C

Kravets V., Musarskiy R., Volkov S.

(Rus)

卷 11, 编号 4 (2017)

Efficiency of application of direct-drive circuit for improvement of starting characteristics of gas turbine engine

Chechulin A., Krivoshev I.

(Rus)

卷 12, 编号 4 (2018)

The concept of the controlled movement of the tracked vehicle

Beketov S.

(Rus)

卷 18, 编号 3 (2024)

Development of postprocessors for CNC "Axiom Control"

Gusev S., Makarov V.

(Rus)

卷 15, 编号 2 (2021)

The issue of improving the efficiency of nitrogen oxide neutralization systems in diesel internal combustion engines

Shabanov A., Kondratiev D., Vanin V., Dunin A.

(Rus)

卷 6, 编号 1 (2012)

THE ROLE OF INDUSTRIAL CORPORATIONS IN THE INNOVATION BUSINESS

Gribanich V.

(Rus)

Analysis of the Mechanics of Cutting by a Cylindrical Drill with a Bridge

Olenin L.

(Rus)

Method of improving the performance of gasoline engine work with internal mixing

Fomin V., Platunov А.

(Rus)

Use of Modern Information and Communication Technologies in the Practice of Teaching the Russian language and culture of speech Subject

Kochanova E.

(Rus)

卷 3, 编号 2 (2009)

On the issue of possibilities of educational process at the solution of applied problems

Martishkin V., Prilepina N.

(Rus)

The Issues of Industrial Cycles Modeling in the National Economy

Katanaev N., Arkatova N., Larina E.

(Rus)

Improvement of Geometrical Parameters of Surface Quality in Process of Broaching on the Basis of Modernization of Cutting Tool Design

Bekayev A., Shchedrin A., Skoromnov V.

(Rus)

Methodological Approaches to Safety System Development for Motor Transport Complex on the Basis of Risk Management Subject to Design Reliability Requirements

Komarov V.

(Rus)

Analysis and synthesis of robust control for linear systems of double damping

Trindyuk V., Kiyko G.

(Rus)