| 期 |
标题 |
文件 |
| 卷 23, 编号 3 (2024) |
Automation of conceptual design and modification of aircraft type unmanned aerial vehicles using multidisciplinary optimization and evolutionary algorithms. Part 1: Methods and models |
(Rus)
|
|
Komarov V., Lukyanov O., Hoang V., Kurkin E., QuijadaPioquinto J.
|
| 卷 23, 编号 4 (2024) |
Automation of conceptual design and modification of aircraft-type unmanned aerial vehicles using multidisciplinary optimization and evolutionary algorithms. Part 2: results and analysis |
(Rus)
|
|
Komarov V., Lukyanov O., Hoang V., Kurkin E., Quijada Pioquinto J.
|
| 卷 23, 编号 2 (2024) |
Automation of the process of testing on-board systems of unmanned aerial vehicles |
(Rus)
|
|
Kirillov A., Sitnikov V., Tuchin A.
|
| 卷 23, 编号 2 (2024) |
The relevance of introducing a requirements management system in the production process of the aircraft engine construction industry |
(Rus)
|
|
Malinovskiy I., Starodumov A., Myagkov K., Yusipov B.
|
| 卷 22, 编号 4 (2023) |
Algoritms for determining the attitude position of an unmanned aerial vehicle relative to the landing platform by using computer vision |
(Rus)
|
|
Gainutdinova T., Novikova S., Gainutdinov V., Trusfus M., Litvin V.
|
| 卷 24, 编号 1 (2025) |
Analysis of the possibilities for the creation of a relay system to control a multi-satellite orbital constellation |
(Rus)
|
|
Potyupkin A., Kraskov V., Yakhutin S., Avramenko S.
|
| 卷 24, 编号 1 (2025) |
Analysis and optimization of piston engine exhaust noise silencer using ALLBEA NOISE |
(Rus)
|
|
Dadashov R., Chernousov A.
|
| 卷 23, 编号 1 (2024) |
Analysis and improvement of characteristics of power supply systems for the small space vehicle of the AIST-2 type |
(Rus)
|
|
Mordanov M., Safronov S.
|
| 卷 22, 编号 3 (2023) |
Approximation of forces of fluid film bearing lubricating layer using machine learning methods |
(Rus)
|
|
Kazakov Y., Stebakov I., Shutin D., Savin L.
|
| 卷 23, 编号 1 (2024) |
Ballistic analysis of a mission to Jupiter’s moon Callisto with landing on the surface |
(Rus)
|
|
Kovalev V., Marchenko A., Starostina T., Sharipova A.
|
| 卷 23, 编号 1 (2024) |
Verification of aero-engine numerical rotor models based on virtual static structural and modal tests |
(Rus)
|
|
Shaposhnikov K., Degtyarev S., Leontiev M., Anisimov S.
|
| 卷 22, 编号 1 (2023) |
Verification of a transonic stage CFD model for assessing the erosion wear influence on the operation of the axial compressor |
(Rus)
|
|
Blinov V., Zubkov I.
|
| 卷 24, 编号 1 (2025) |
Vibration protection system with controlled inertial damper |
(Rus)
|
|
Chernyshev V., Polyakov R., Fominova O.
|
| 卷 24, 编号 2 (2025) |
Vitamin space greenhouse as an element of advanced biological and technical support for space crews |
(Rus)
|
|
Berkovich Y., Belyak A., Buryak A., Smirnov Y., Ivanova A.
|
| 卷 23, 编号 1 (2024) |
Effect of HF and ER additions on the mechanical properties and microstructure of AL-MG-SC-ZR system alloys |
(Rus)
|
|
Aryshenskii E., Aryshenskii V., Ragazin A., Rasposienko D., Grechnikov F., Makarov V., Konovalov S.
|
| 卷 22, 编号 2 (2023) |
Influence of complex loading of radial bearings of the oscillation groups of liquid propellant engine steering gear on the frictional moment |
(Rus)
|
|
Balyakin V., Lavrin A., Dolgikh D.
|
| 卷 24, 编号 2 (2025) |
Influence of the design concept of an experimental demonstration model of a rocket design element on the process of heat and mass transfer |
(Rus)
|
|
Trushlyakov V., Surikova Y., Davydovich D.
|
| 卷 23, 编号 3 (2024) |
Selection of aerodynamic characteristics and engine parameters of a maneuverable aircraft under epistemic uncertainty |
(Rus)
|
|
Veresnikov G., Ogorodnikov O.
|
| 卷 24, 编号 2 (2025) |
Selection of performance indicators for the system of bench tests of unmanned aerial vehicles |
(Rus)
|
|
Kovalev M., Kirillov A., Sitnikov V.
|
| 卷 23, 编号 3 (2024) |
Selection of design parameters of a spacecraft electric propulsion engine ensuring the geostationary orbit raising mission |
(Rus)
|
|
Kolesov A., Salmin V.
|
| 卷 23, 编号 3 (2024) |
Gas dynamic optimization of the work process of a single-stage cooled axial turbine with an inside baffle |
(Rus)
|
|
Popov G., Goryachkin E., Melnikov S., Shcherban A., Gataullina E.
|
| 卷 23, 编号 3 (2024) |
Intelligent robust controllers for tribotronic conical fluid film bearings |
(Rus)
|
|
Kazakov Y., Shutin D., Savin L.
|
| 卷 23, 编号 4 (2024) |
Thermocycling test of a titanium-carbon fiber adhesive joint produced using laser texturing technology |
(Rus)
|
|
Rudenko M., Girn A., Mikheev A., Taigin V.
|
| 卷 24, 编号 1 (2025) |
Investigation of vibration modes for optically transparent components by using digital speckle interferometry and finite element method |
(Rus)
|
|
Ivchenko A., Zhuzhukin A., Sergeev R., Safin A.
|
| 卷 23, 编号 1 (2024) |
Investigation of the influence of broadband mechanical disturbances on the quality of recording interference patterns of GTE-wheel oscillations using a digital speckle pattern interferometer |
(Rus)
|
|
Ivchenko A., Safin A.
|
| 卷 23, 编号 2 (2024) |
Investigation of the dynamic characteristics of the pneumatic-mechanical drive of the installation movements of machine mechanisms |
(Rus)
|
|
Prikhodko S., Sidorenko V., Korotych D.
|
| 卷 22, 编号 4 (2023) |
Investigation of the edge effect in composites using the ANSYS software in a two-dimensional formulation |
(Rus)
|
|
Skvortsov Y., Evtushenko M.
|
| 卷 23, 编号 1 (2024) |
Investigation of surface morphology, optical and electronic properties of Mg2Si thin films on Si(111) |
(Rus)
|
|
Fomin D., Polyakov A., Galkin K., Galkin N.
|
| 卷 24, 编号 2 (2025) |
Research of dielectric elastomer actuator parameters for an active vibration insulation system |
(Rus)
|
|
Bazinenkov A., Shcherbakova V., Sidorova S., Kuptsov A., Felde A.
|
| 卷 23, 编号 4 (2024) |
Research of the technology of developing sensitive elements of rocket engine system pressure sensors |
(Rus)
|
|
Trofimov A., Pecherskaya E., Zbodnov S.
|
| 卷 23, 编号 2 (2024) |
Investigation of a multilayer magnetorheological elastomer damper characteristics |
(Rus)
|
|
Bazinenkov A., Shagimuratova A., Makeev I., Bakharev V., Mukhanov V.
|
| 卷 22, 编号 1 (2023) |
Survey of the flight efficiency of a long-haul aircraft under uncertainty of tasks |
(Rus)
|
|
Markiewicz P.
|
| 卷 22, 编号 3 (2023) |
Study of the efficiency of the application of gas dynamic stabilization of the flame in a current engine |
(Rus)
|
|
Belonozhkin V., Teslya D.
|
| 卷 23, 编号 4 (2024) |
Classification features of adaptive wing designs: history of creation, application experience and advanced developments |
(Rus)
|
|
Vetlitsyn M., Sharonov N.
|
| 卷 22, 编号 3 (2023) |
Classification and comparative analysis of methods for limiting technogenic pollution in the near-Earth space |
(Rus)
|
|
Klyushnikov V., Zakharova A., Usovik I.
|
| 卷 22, 编号 4 (2023) |
Complex of algorithms for fast determination of the parameters of motion of high-speed vessels in the digital signal processing system of a space synthetic aperture radar |
(Rus)
|
|
Gusev S., Moroz A.
|
| 卷 23, 编号 3 (2024) |
Construction of a prototype of the basic module of a scalable robotic system for simulation of composite surfaces for dynamic tests |
(Rus)
|
|
Grafkin A., Ponamarenko D.
|
| 卷 23, 编号 1 (2024) |
Mathematical model of a generalized quadcopter kinematic scheme and its software implementation |
(Rus)
|
|
Zelenskiy V., Kovalev M., Ovakimyan D., Kirillov V.
|
| 卷 24, 编号 2 (2025) |
Mathematical model of a hydrogen solid oxide fuel cell and its software implementation |
(Rus)
|
|
Gorjunov I., Nikitin A., Loskutnikov A., Ivanov N.
|
| 卷 22, 编号 4 (2023) |
Method of automated arrangement of devices in a spacecraft compartment taking into account connection to interface connectors of feed-through plates of an on-board cable system |
(Rus)
|
|
Belyakov A., Prihodko V., Shulepov A.
|
| 卷 23, 编号 4 (2024) |
Method of testing the software of spacecraft electronic equipment based on fault injection in the algorithms of orientation and stabilization |
(Rus)
|
|
Nedorezov D., Postnikov A., Murigin A., Shnaider A.
|
| 卷 24, 编号 1 (2025) |
Method for monitoring the performance of spaceсraft payload in real time |
(Rus)
|
|
Shakhanov A., Bogachev S.
|
| 卷 22, 编号 4 (2023) |
Optimization of the parameters of a ground speed meter of low-flying aircraft based on the application of the theory of optimal filtration |
(Rus)
|
|
Ivanov M., Yezerskiy V.
|
| 卷 23, 编号 3 (2024) |
Development of the numerical differentiation method for approximating pitch acceleration using sensor fusion approach |
(Rus)
|
|
Korsun O., Goro S., Om M.
|
| 卷 24, 编号 1 (2025) |
Method for searching defects in gas turbine engine blades under visible light using the U-NET model |
(Rus)
|
|
Alekseev E., Lomanov A.
|
| 卷 23, 编号 2 (2024) |
Method of first-approximation calculation of take-off weight of a light aircraft with a hybrid propulsion system |
(Rus)
|
|
Sychev A., Arbuzov I., Ravikovich Y.
|
| 卷 22, 编号 4 (2023) |
Method of scanning thin surfaces in repairing gas turbine blades |
(Rus)
|
|
Kotlyar D., Lomanov A.
|
| 卷 22, 编号 2 (2023) |
Method of individual selection of parts for selective assembly of electrohydraulic servo drives |
(Rus)
|
|
Medvedev A., Khalatov E.
|
| 卷 23, 编号 4 (2024) |
Methodology of calculating on-board equipment arranging coordinates with preliminary estimate of on-board cable system mass |
(Rus)
|
|
Belyakov A., Shulepov A., Papazov V., Prihodko V., Fedosov A.
|
| 卷 22, 编号 1 (2023) |
Methodology for assessing and reducing the aerodynamic imbalance of the impellers of GTE fans |
(Rus)
|
|
Kudashov E., Grachev I., Bolotov M.
|
| 卷 24, 编号 2 (2025) |
Methodology for design assessment of terrain linear resolution of optical-electronic Earth surface observation spacecraft taking into account uncertain operational factors |
(Rus)
|
|
Kurenkov V., Pupkov E.
|
| 卷 24, 编号 2 (2025) |
Method of computation of gas-tube engines in windmill modes |
(Rus)
|
|
Leshchenko I., Rozhkova M., Tarmaev A., Donskikh V.
|
| 卷 24, 编号 2 (2025) |
Method of calculating the fuel combustion efficiency in the afterburner combustion chamber of a gas turbine dual fuel engine |
(Rus)
|
|
Zhuk A., Grasko T., Kolesnikov A., Raznoschikov V.
|
| 卷 22, 编号 4 (2023) |
Methodology of delivering space parts, tools and accessories to a near Earth orbital station on the basis of the reliability factor |
(Rus)
|
|
Zheleznov I., Uperchuk R., Eroshenko V.
|
| 卷 23, 编号 3 (2024) |
Methodical and algorithmic aspects of mathematical modeling of a screw aircraft power plant |
(Rus)
|
|
Zinenkov Y.
|
| 卷 23, 编号 3 (2024) |
Methodological approaches to the creation and functioning of serial robotic production of small satellites |
(Rus)
|
|
Tkachenko I.
|
| 卷 24, 编号 1 (2025) |
Methods and means of increasing the efficiency of the AIST-2 type spacecraft for the task of monitoring the territory of Myanmar |
(Rus)
|
|
Myo H., Abrashkin V.
|
| 卷 24, 编号 1 (2025) |
Mechanical and electrical properties of ALTEK alloy electrical foil for transformer windings |
(Rus)
|
|
Levagina A., Aryshenskii E., Konovalov S., Korotkova N., Tepterev M., Borminsky S.
|
| 卷 22, 编号 2 (2023) |
Multi-position control of movements of large-sized structural elements during static loading using a laser tracker |
(Rus)
|
|
Sazonnikova N., Uklein R.
|
| 卷 22, 编号 3 (2023) |
Modal analysis of a spacecraft solar panel |
(Rus)
|
|
Kryuchkov A., Safin A., Ermilov M., Vidyaskina A., Igolkin A., Ye. V. Shakhmatov Y.
|
| 卷 22, 编号 3 (2023) |
Models for determining the orientation of the solar battery of an observation spacecraft relative to the Sun during object survey and retargeting |
(Rus)
|
|
Kurenkov V., Pupkov E.
|
| 卷 23, 编号 2 (2024) |
Modelling width of the spectral component of a gas-turbine engine gearbox output shaft speed |
(Rus)
|
|
Sundukov A., Shakhmatov E.
|
| 卷 23, 编号 4 (2024) |
Simulation of the onboard energy balance of spacecraft for Earth remote sensing |
(Rus)
|
|
Kurenkov V., Pupkov E., Tkachenko I.
|
| 卷 22, 编号 2 (2023) |
Simulating the process of retargeting of optoelectronic Earth observation spacecraft during object shooting |
(Rus)
|
|
Kurenkov V., Pupkov E., Kucherov A.
|
| 卷 23, 编号 4 (2024) |
Simulation of the processes of spraying and combustion of kerosene and liquid oxygen in the chamber of a liquid-propellant rocket engine |
(Rus)
|
|
Senchev M., Zubrilin I., Yurtaev A., Benedyuk М., Komisar Y.
|
| 卷 23, 编号 4 (2024) |
Model of interaction between laser radiation and metal powder composition during direct laser growth |
(Rus)
|
|
Balyakin A.
|
| 卷 23, 编号 4 (2024) |
Model of reed valve dynamics in unsteady flow, solution algorithm, and validation on a single-cycle rig |
(Rus)
|
|
Enikeev R., Chernousov A.
|
| 卷 22, 编号 4 (2023) |
Model of the turboprop engine reduction gear tooth harmonic spectral component |
(Rus)
|
|
Sundukov A., Shakhmatov E.
|
| 卷 23, 编号 2 (2024) |
Reliability-oriented design of PCM thermodimensionally stable space structures |
(Rus)
|
|
Klimakova L.
|
| 卷 23, 编号 1 (2024) |
Neural network controller of a gas turbine plant low emission combustor |
(Rus)
|
|
Avgustinovich V., Kuznetsova T., Sukharev A.
|
| 卷 24, 编号 2 (2025) |
Some new aspects in the diagnostics of the technical condition of planetary gearboxes of aircraft gas-turbine engines |
(Rus)
|
|
Sundukov A., Shakhmatov E., Kryuchkov A., Igolkin A.
|
| 卷 22, 编号 2 (2023) |
New methods for identifying diagnostic indicators of the technical condition of aircraft gas turbine engine reduction gearboxes |
(Rus)
|
|
Sundukov A., Shakhmatov Y.
|
| 卷 23, 编号 1 (2024) |
New high-strength aluminum alloy on the basis of secondary materials |
(Rus)
|
|
Barykin M., Naumova E., Belov N., Finogeev A., Koshmin A.
|
| 卷 24, 编号 1 (2025) |
On the possibility of determining the parameters of the ionosphere when removing a nanosatellite from orbit using an uninsulated conductive tether |
(Rus)
|
|
Bystranova T., Zabolotnov Y.
|
| 卷 23, 编号 4 (2024) |
On the acceptable level of risks in the implementation of strategic planning programs for technological innovations in the development of space systems |
(Rus)
|
|
Petrukhin B., Bychkov Y., Letyagin A., Fursaeva T.
|
| 卷 22, 编号 1 (2023) |
Ensuring vibration characteristics of reactor plant centrifugal pumping equipment |
(Rus)
|
|
Savchuk D., Bescherov D., Kulikov D., Panov V., Patrushev V., Porfiriev M., Soloviev S.
|
| 卷 22, 编号 1 (2023) |
The problems of creating a propulsion system of a new generation supersonic passenger aircraft (review) |
(Rus)
|
|
Alendar A., Lanshin A., Evstigneev A., Yakubovsky K., Siluyanova M.
|
| 卷 22, 编号 3 (2023) |
Abrasive flow machining of specimens of cast billets from austenomartensitic steel with high-viscosity media |
(Rus)
|
|
Levko V., Teryaev N., Litovka O., Ivanov P.
|
| 卷 22, 编号 3 (2023) |
Determining aerodynamic characteristics of small unmanned aerial vehicles involving flight experiment |
(Rus)
|
|
Lukyanov O., Zolotov D., Espinosa Barsenas O., Komarov V.
|
| 卷 23, 编号 1 (2024) |
Determination of completeness of combustion, temperature and emission characteristics in a swirl flow based on the theory of turbulent combustion |
(Rus)
|
|
Aleksandrov Y., Mingazov B.
|
| 卷 23, 编号 2 (2024) |
Assessment of the endurance limit of light structural metal components using the fatigue surface development method |
(Rus)
|
|
Zalyaev R., Kirpichev V.
|
| 卷 22, 编号 1 (2023) |
Optimization of operation mode and design parameters of a finely-dispersed metallic liquid-alloy generator |
(Rus)
|
|
Egorychev V., Ryazanov A., Khaimovich A.
|
| 卷 23, 编号 1 (2024) |
Optimization of trajectory motion of the first stage of an aerospace system |
(Rus)
|
|
Khramov A.
|
| 卷 22, 编号 4 (2023) |
JSC “ODK” experience in implementing digital twin technologies in the design of gas turbine engines |
(Rus)
|
|
Vinogradov K., Nikulin A., Shmotin Y.
|
| 卷 23, 编号 1 (2024) |
Main approaches and features of the design of aircraft hydro-mechanical control systems |
(Rus)
|
|
Petrov P., Tselischev V., Kuderko D.
|
| 卷 22, 编号 1 (2023) |
Features of dynamic processes in the “indentor – coating” system during tests on a tribometer |
(Rus)
|
|
Kolesnikov I., Koropets P., Manturov D., Shakhmatov Y.
|
| 卷 24, 编号 1 (2025) |
Design features of a granular-propellant supply system and an experimental setup for analyzing bulk materials outflow |
(Rus)
|
|
Elkin A., Malinin V., Dotkin G., Zorin M., Hramtsov M., Gubin R.
|
| 卷 22, 编号 4 (2023) |
Features of the use of directional fixed antennas of a high-speed radio link on a small spacecraft AIST-2T |
(Rus)
|
|
Eremina V., Erkov I., Zhuravlev A., Maslov I., Pyrinov N.
|
| 卷 22, 编号 3 (2023) |
Features of design calculation of compressor spool flow path of a twin-shaft gas turbine engine core on the basis of 1D and 2D models of their working process |
(Rus)
|
|
Matveev V., Goriachkin E., Popov G., Baturin O., Kudryashov I.
|
| 卷 22, 编号 2 (2023) |
Special features of assessing the strength of nuclear reactor equipment under dynamic loads |
(Rus)
|
|
Lonin K., Panov V., Patrushev V., Savchuk D., Soloviev S.
|
| 卷 24, 编号 1 (2025) |
Evaluation of mainline aircraft center section weight efficiency |
(Rus)
|
|
Boldyrev A., Zolotov D.
|
| 卷 23, 编号 4 (2024) |
Evaluation of the influence of various factors on the productivity in low-temperature power plants |
(Rus)
|
|
Tremkina O., Blagin E., Panshin R., Shikhalev V.
|
| 卷 24, 编号 2 (2025) |
Assessment of the influence of turbulators in the neck of a low frequency resonator on its acoustic characteristics |
(Rus)
|
|
Kustov O., Palchikovskiy V., Khramtsov I., Kuznetsov A.
|
| 卷 22, 编号 3 (2023) |
Assessment of the possibility of shortening the landing distance of maneuverable aircraft |
(Rus)
|
|
Strelets M., Tarasov A., Grishin I.
|
| 卷 24, 编号 2 (2025) |
Assessment of cryogenic energy storage systems efficiency |
(Rus)
|
|
Blagin E., Uglanov D.
|
| 卷 23, 编号 3 (2024) |
Parametric identification of coefficients for a model of fatigue stiffness degradation of a composite material |
(Rus)
|
|
Panteleev A., Turbin N., Nadorov I., Kononov N.
|
| 卷 22, 编号 1 (2023) |
Prospects of improving control over the process of electrochemical machining of the blade airfoil profile using the duplex mode method |
(Rus)
|
|
Smirnov G., Shulepov A., Mescheryakov A.
|
| 卷 23, 编号 2 (2024) |
Improving the accuracy of industrial robot movements in the process of incremental shaping |
(Rus)
|
|
Sazonnikova N., Ilyukhin V., Surudin S., Mezentsev D.
|
| 卷 23, 编号 2 (2024) |
Increasing the efficiency and stability of fuel supply to the combustion chamber of a liquid rocket engine by spray nozzles |
(Rus)
|
|
Ageenko Y., Bubnova A.
|
| 卷 22, 编号 3 (2023) |
Exploratory analysis of hybrid polymer metal-composite structures |
(Rus)
|
|
Khaliulin V., Petrov P., Kostin V., Levshonkov N.
|
| 1 - 100 的 138 信息 |
1 2 > >> |
